new file mode 100644
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/st,led1202.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST LED1202 LED controllers
+
+maintainers:
+ - Vicentiu Galanopulo <vicentiu.galanopulo@remote-tech.co.uk>
+
+description: |
+ The LED1202 is a 12-channel low quiescent current LED controller
+ programmable via I2C; The output current can be adjusted separately
+ for each channel by 8-bit analog and 12-bit digital dimming control.
+ Datasheet available at
+ https://www.st.com/en/power-management/led1202.html
+
+properties:
+ compatible:
+ const: st,led1202
+
+ reg:
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+patternProperties:
+ "^led@[0-9a-f]$":
+ type: object
+ $ref: common.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ reg:
+ minimum: 0
+ maximum: 11
+
+ required:
+ - reg
+
+required:
+ - compatible
+ - reg
+ - "#address-cells"
+ - "#size-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/leds/common.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led-controller@58 {
+ compatible = "st,led1202";
+ reg = <0x58>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0x0>;
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_RED>;
+ function-enumerator = <1>;
+ };
+
+ led@1 {
+ reg = <0x1>;
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
+ function-enumerator = <2>;
+ };
+
+ led@2 {
+ reg = <0x2>;
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_BLUE>;
+ function-enumerator = <3>;
+ };
+
+ led@3 {
+ reg = <0x3>;
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_RED>;
+ function-enumerator = <4>;
+ };
+
+ led@4 {
+ reg = <0x4>;
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
+ function-enumerator = <5>;
+ };
+
+ led@5 {
+ reg = <0x5>;
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_BLUE>;
+ function-enumerator = <6>;
+ };
+
+ led@6 {
+ reg = <0x6>;
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_RED>;
+ function-enumerator = <7>;
+ };
+
+ led@7 {
+ reg = <0x7>;
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
+ function-enumerator = <8>;
+ };
+
+ led@8 {
+ reg = <0x8>;
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_BLUE>;
+ function-enumerator = <9>;
+ };
+ };
+ };
+...
The LED1202 is a 12-channel low quiescent current LED driver with: * Supply range from 2.6 V to 5 V * 20 mA current capability per channel * 1.8 V compatible I2C control interface * 8-bit analog dimming individual control * 12-bit local PWM resolution * 8 programmable patterns If the led node is present in the controller then the channel is set to active. v1: https://lore.kernel.org/lkml/ZnCnnQfwuRueCIQ0@admins-Air/T/ v2: https://lore.kernel.org/all/ZniNdGgKyUMV-hjq@admins-Air/T/ v3: https://lore.kernel.org/all/ZniNdGgKyUMV-hjq@admins-Air/T/ Signed-off-by: Vicentiu Galanopulo <vicentiu.galanopulo@remote-tech.co.uk> --- Changes in v4: - remove label property, use devm_led_classdev_register_ext instead - use as base patch the v3 Changes in v3: - remove active property Changes in v2: - renamed label to remove color from it - add color property for each node - add function and function-enumerator property for each node --- .../devicetree/bindings/leds/st,led1202.yaml | 132 ++++++++++++++++++ 1 file changed, 132 insertions(+) create mode 100644 Documentation/devicetree/bindings/leds/st,led1202.yaml