diff mbox series

[v2,3/3] leds: leds-lp5569: Enable chip after chip configuration

Message ID 20240712004556.15601-3-ansuelsmth@gmail.com
State New
Headers show
Series [v2,1/3] leds: leds-lp5569: Fix typo in driver name | expand

Commit Message

Christian Marangi July 12, 2024, 12:45 a.m. UTC
Documentation say that clock internal config needs to be set BEFORE chip
is enabled. Align code to this and move the CHIP enable after the CHIP
is configured.

While at it also make use of STATUS reg and check when STARTUP is
completed instead of sleep for 1-2 ms.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
Changes v2:
- Fix compilation warning (u8 instead of int)

 drivers/leds/leds-lp5569.c | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)
diff mbox series

Patch

diff --git a/drivers/leds/leds-lp5569.c b/drivers/leds/leds-lp5569.c
index 2b4f358bc63a..313dbf80ddec 100644
--- a/drivers/leds/leds-lp5569.c
+++ b/drivers/leds/leds-lp5569.c
@@ -7,6 +7,7 @@ 
 #include <linux/delay.h>
 #include <linux/firmware.h>
 #include <linux/i2c.h>
+#include <linux/iopoll.h>
 #include <linux/leds.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
@@ -91,6 +92,8 @@ 
 #define LP5569_ENG2_MUX_ADDR		0xd0
 #define LP5569_ENG3_MUX_ADDR		0xe0
 
+#define LP5569_STARTUP_SLEEP		500
+
 #define LEDn_STATUS_FAULT(n, status)	((status) >> (n) & BIT(0))
 
 #define LP5569_DEFAULT_CONFIG \
@@ -168,14 +171,7 @@  static int lp5569_init_program_engine(struct lp55xx_chip *chip)
 static int lp5569_post_init_device(struct lp55xx_chip *chip)
 {
 	int ret;
-	int val;
-
-	ret = lp55xx_write(chip, LP5569_REG_ENABLE, LP5569_ENABLE);
-	if (ret)
-		return ret;
-
-	/* Chip startup time is 500 us, 1 - 2 ms gives some margin */
-	usleep_range(1000, 2000);
+	u8 val;
 
 	val = LP5569_DEFAULT_CONFIG;
 	val |= FIELD_PREP(LP5569_CP_MODE_MASK, chip->pdata->charge_pump_mode);
@@ -198,6 +194,13 @@  static int lp5569_post_init_device(struct lp55xx_chip *chip)
 			return ret;
 	}
 
+	ret = lp55xx_write(chip, LP5569_REG_ENABLE, LP5569_ENABLE);
+	if (ret)
+		return ret;
+
+	read_poll_timeout(lp55xx_read, ret, !(val & LP5569_STARTUP_BUSY),
+			  LP5569_STARTUP_SLEEP, LP5569_STARTUP_SLEEP * 10, false,
+			  chip, LP5569_REG_STATUS, &val);
 
 	return lp5569_init_program_engine(chip);
 }