diff mbox series

[1/3] auxdisplay: Add 7 segment LED display driver

Message ID 20240225213423.690561-2-chris.packham@alliedtelesis.co.nz
State New
Headers show
Series auxdisplay: 7 segment LED display | expand

Commit Message

Chris Packham Feb. 25, 2024, 9:34 p.m. UTC
Add a driver for a 7 segment LED display. At the moment only one
character is supported but it should be possible to expand this to
support more characters and/or 14 segment displays in the future.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---
 drivers/auxdisplay/Kconfig   |   7 ++
 drivers/auxdisplay/Makefile  |   1 +
 drivers/auxdisplay/seg-led.c | 152 +++++++++++++++++++++++++++++++++++
 3 files changed, 160 insertions(+)
 create mode 100644 drivers/auxdisplay/seg-led.c

Comments

Randy Dunlap Feb. 26, 2024, 2:49 a.m. UTC | #1
Hi--

On 2/25/24 13:34, Chris Packham wrote:
> Add a driver for a 7 segment LED display. At the moment only one
> character is supported but it should be possible to expand this to
> support more characters and/or 14 segment displays in the future.
> 
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> ---
>  drivers/auxdisplay/Kconfig   |   7 ++
>  drivers/auxdisplay/Makefile  |   1 +
>  drivers/auxdisplay/seg-led.c | 152 +++++++++++++++++++++++++++++++++++
>  3 files changed, 160 insertions(+)
>  create mode 100644 drivers/auxdisplay/seg-led.c
> 
> diff --git a/drivers/auxdisplay/Kconfig b/drivers/auxdisplay/Kconfig
> index d944d5298eca..e826b5b15881 100644
> --- a/drivers/auxdisplay/Kconfig
> +++ b/drivers/auxdisplay/Kconfig
> @@ -197,6 +197,13 @@ config ARM_CHARLCD
>  	  line and the Linux version on the second line, but that's
>  	  still useful.
>  
> +config SEG_LED
> +	bool "Generic 7 segment LED display"
> +	select LINEDISP
> +	help
> +	  This driver supports a generic 7 segment LED display made up

	                                 7-segment

> +	  of GPIO pins connected to the individual segments.
> +
>  menuconfig PARPORT_PANEL
>  	tristate "Parallel port LCD/Keypad Panel support"
>  	depends on PARPORT
> diff --git a/drivers/auxdisplay/Makefile b/drivers/auxdisplay/Makefile
> index 6968ed4d3f0a..808fdf156bd5 100644
> --- a/drivers/auxdisplay/Makefile
> +++ b/drivers/auxdisplay/Makefile
> @@ -14,3 +14,4 @@ obj-$(CONFIG_HT16K33)		+= ht16k33.o
>  obj-$(CONFIG_PARPORT_PANEL)	+= panel.o
>  obj-$(CONFIG_LCD2S)		+= lcd2s.o
>  obj-$(CONFIG_LINEDISP)		+= line-display.o
> +obj-$(CONFIG_SEG_LED)		+= seg-led.o
> diff --git a/drivers/auxdisplay/seg-led.c b/drivers/auxdisplay/seg-led.c
> new file mode 100644
> index 000000000000..c0b302a09cbb
> --- /dev/null
> +++ b/drivers/auxdisplay/seg-led.c
> @@ -0,0 +1,152 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Driver for a 7 segment LED display
> + *
> + * The GPIOs are wired to the 7 segments in a clock wise fashion starting from
> + * the top.
> + *
> + *      -a-
> + *     |   |
> + *     f   b
> + *     |   |
> + *      -g-
> + *     |   |
> + *     e   c
> + *     |   |
> + *      -d-
> + *
> + * The decimal point LED presnet on some devices is currently not

                            present

> + * supported.
> + *
> + * Copyright (C) Allied Telesis Labs
> + */
diff mbox series

Patch

diff --git a/drivers/auxdisplay/Kconfig b/drivers/auxdisplay/Kconfig
index d944d5298eca..e826b5b15881 100644
--- a/drivers/auxdisplay/Kconfig
+++ b/drivers/auxdisplay/Kconfig
@@ -197,6 +197,13 @@  config ARM_CHARLCD
 	  line and the Linux version on the second line, but that's
 	  still useful.
 
+config SEG_LED
+	bool "Generic 7 segment LED display"
+	select LINEDISP
+	help
+	  This driver supports a generic 7 segment LED display made up
+	  of GPIO pins connected to the individual segments.
+
 menuconfig PARPORT_PANEL
 	tristate "Parallel port LCD/Keypad Panel support"
 	depends on PARPORT
diff --git a/drivers/auxdisplay/Makefile b/drivers/auxdisplay/Makefile
index 6968ed4d3f0a..808fdf156bd5 100644
--- a/drivers/auxdisplay/Makefile
+++ b/drivers/auxdisplay/Makefile
@@ -14,3 +14,4 @@  obj-$(CONFIG_HT16K33)		+= ht16k33.o
 obj-$(CONFIG_PARPORT_PANEL)	+= panel.o
 obj-$(CONFIG_LCD2S)		+= lcd2s.o
 obj-$(CONFIG_LINEDISP)		+= line-display.o
+obj-$(CONFIG_SEG_LED)		+= seg-led.o
diff --git a/drivers/auxdisplay/seg-led.c b/drivers/auxdisplay/seg-led.c
new file mode 100644
index 000000000000..c0b302a09cbb
--- /dev/null
+++ b/drivers/auxdisplay/seg-led.c
@@ -0,0 +1,152 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for a 7 segment LED display
+ *
+ * The GPIOs are wired to the 7 segments in a clock wise fashion starting from
+ * the top.
+ *
+ *      -a-
+ *     |   |
+ *     f   b
+ *     |   |
+ *      -g-
+ *     |   |
+ *     e   c
+ *     |   |
+ *      -d-
+ *
+ * The decimal point LED presnet on some devices is currently not
+ * supported.
+ *
+ * Copyright (C) Allied Telesis Labs
+ */
+
+#include <linux/gpio/consumer.h>
+#include <linux/kernel.h>
+#include <linux/map_to_7segment.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#include "line-display.h"
+
+struct seg_led_priv {
+	struct gpio_descs *segment_gpios;
+	struct delayed_work work;
+	struct linedisp linedisp;
+	struct seg7_conversion_map seg7;
+	unsigned int map_size;
+	size_t num_char;
+	char curr[];
+};
+
+static const SEG7_DEFAULT_MAP(initial_map_seg7);
+
+static ssize_t map_seg7_show(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	struct seg_led_priv *priv = dev_get_drvdata(dev);
+
+	memcpy(buf, &priv->seg7, priv->map_size);
+	return priv->map_size;
+}
+
+static ssize_t map_seg7_store(struct device *dev, struct device_attribute *attr,
+			      const char *buf, size_t cnt)
+{
+	struct seg_led_priv *priv = dev_get_drvdata(dev);
+
+	if (cnt != priv->map_size)
+		return -EINVAL;
+
+	memcpy(&priv->seg7, buf, cnt);
+	return cnt;
+}
+
+static DEVICE_ATTR_RW(map_seg7);
+
+static void seg_led_linedisp_update(struct linedisp *linedisp)
+{
+	struct seg_led_priv *priv = container_of(linedisp, struct seg_led_priv, linedisp);
+
+	schedule_delayed_work(&priv->work, 0);
+}
+
+static void seg_led_update(struct work_struct *work)
+{
+	struct seg_led_priv *priv = container_of(work, struct seg_led_priv, work.work);
+	DECLARE_BITMAP(values, 8);
+
+	values[0] = map_to_seg7(&priv->seg7, priv->curr[0]);
+
+	gpiod_set_array_value_cansleep(priv->segment_gpios->ndescs, priv->segment_gpios->desc,
+				       priv->segment_gpios->info, values);
+}
+
+static const struct of_device_id seg_led_of_match[] = {
+	{ .compatible = "generic,gpio-7seg"},
+	{}
+};
+MODULE_DEVICE_TABLE(of, seg_led_of_match);
+
+static int seg_led_probe(struct platform_device *pdev)
+{
+	struct seg_led_priv *priv;
+	int err;
+
+	priv = devm_kzalloc(&pdev->dev, struct_size(priv, curr, 1), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+	priv->num_char = 1;
+
+	platform_set_drvdata(pdev, priv);
+
+	priv->segment_gpios = devm_gpiod_get_array(&pdev->dev, "segment", GPIOD_OUT_LOW);
+	if (IS_ERR(priv->segment_gpios))
+		return PTR_ERR(priv->segment_gpios);
+
+	priv->seg7 = initial_map_seg7;
+	priv->map_size = sizeof(priv->seg7);
+
+	err = device_create_file(&pdev->dev, &dev_attr_map_seg7);
+	if (err)
+		return err;
+
+	INIT_DELAYED_WORK(&priv->work, seg_led_update);
+
+	err = linedisp_register(&priv->linedisp, &pdev->dev, 1, priv->curr,
+				seg_led_linedisp_update);
+	if (err) {
+		device_remove_file(&pdev->dev, &dev_attr_map_seg7);
+		return err;
+	}
+
+	return 0;
+}
+
+static int seg_led_remove(struct platform_device *pdev)
+{
+	struct seg_led_priv *priv = platform_get_drvdata(pdev);
+
+	cancel_delayed_work_sync(&priv->work);
+	linedisp_unregister(&priv->linedisp);
+	device_remove_file(&pdev->dev, &dev_attr_map_seg7);
+
+	return 0;
+}
+
+static struct platform_driver seg_led_driver = {
+	.probe = seg_led_probe,
+	.remove = seg_led_remove,
+	.driver = {
+		.name = "seg-led",
+		.of_match_table = seg_led_of_match,
+	},
+};
+
+module_platform_driver(seg_led_driver);
+
+MODULE_AUTHOR("Chris Packham <chris.packham@alliedtelesis.co.nz>");
+MODULE_DESCRIPTION("7 segment LED driver");
+MODULE_LICENSE("GPL");
+