diff mbox series

[net-next,v5,2/5] dt-bindings: net: phy: Document LED inactive high impedance mode

Message ID 20231227090231.4246-3-ansuelsmth@gmail.com
State Superseded
Headers show
Series net: phy: generic polarity + LED support for qca808x | expand

Commit Message

Christian Marangi Dec. 27, 2023, 9:02 a.m. UTC 
Document LED inactive high impedance mode to set the LED to require high
impedance configuration to be turned OFF.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
Changes v5:
- Add this patch

 Documentation/devicetree/bindings/leds/common.yaml | 6 ++++++
 1 file changed, 6 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml
index f5b40df6b421..9e7b4aabe0bb 100644
--- a/Documentation/devicetree/bindings/leds/common.yaml
+++ b/Documentation/devicetree/bindings/leds/common.yaml
@@ -206,6 +206,12 @@  properties:
       Makes LED active low. To turn the LED ON, line needs to be
       set to low voltage instead of high.
 
+  inactive-high-impedance:
+    type: boolean
+    description:
+      Set LED to high-impedance mode to turn the LED OFF. LED might also
+      describe this mode as tristate.
+
   # Required properties for flash LED child nodes:
   flash-max-microamp:
     description: