Message ID | 20230827132525.951475-16-dmitry.baryshkov@linaro.org |
---|---|
State | Superseded |
Headers | show |
Series | ARM: dts: qcom: cleanup PMIC usage | expand |
On 27.08.2023 15:25, Dmitry Baryshkov wrote: > The interrupt of SSBI PMICs is routed to the SoCs GPIO. As such, it is > not a property of the SoC, it is a property of the particular board > (even if it is standard and unified between all devices). Move these > interrupt specifications to the board files. > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > --- Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad > arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts | 4 ++++ > arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts | 4 ++++ > arch/arm/boot/dts/qcom/qcom-msm8660.dtsi | 2 -- > 3 files changed, 8 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts > index 48fd1a1feea3..e4261d729d35 100644 > --- a/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts > +++ b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts > @@ -273,6 +273,10 @@ kxsd9@18 { > }; > }; > > +&pm8058 { > + interrupts-extended = <&tlmm 88 IRQ_TYPE_LEVEL_LOW>; > +}; > + > &pm8058_gpio { > dragon_ethernet_gpios: ethernet-state { > pinconf { > diff --git a/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts > index 86fbb6dfdc2a..a5441aecd637 100644 > --- a/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts > +++ b/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts > @@ -34,6 +34,10 @@ &gsbi12_serial { > status = "okay"; > }; > > +&pm8058 { > + interrupts-extended = <&tlmm 88 IRQ_TYPE_LEVEL_LOW>; > +}; > + > &pm8058_keypad { > linux,keymap = < > MATRIX_KEY(0, 0, KEY_FN_F1) > diff --git a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi > index 9217ced108c4..84b0366792d4 100644 > --- a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi > +++ b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi > @@ -341,8 +341,6 @@ ssbi@500000 { > > pm8058: pmic { > compatible = "qcom,pm8058"; > - interrupt-parent = <&tlmm>; > - interrupts = <88 8>; > #interrupt-cells = <2>; > interrupt-controller; > #address-cells = <1>;
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts index 48fd1a1feea3..e4261d729d35 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts +++ b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts @@ -273,6 +273,10 @@ kxsd9@18 { }; }; +&pm8058 { + interrupts-extended = <&tlmm 88 IRQ_TYPE_LEVEL_LOW>; +}; + &pm8058_gpio { dragon_ethernet_gpios: ethernet-state { pinconf { diff --git a/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts index 86fbb6dfdc2a..a5441aecd637 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts @@ -34,6 +34,10 @@ &gsbi12_serial { status = "okay"; }; +&pm8058 { + interrupts-extended = <&tlmm 88 IRQ_TYPE_LEVEL_LOW>; +}; + &pm8058_keypad { linux,keymap = < MATRIX_KEY(0, 0, KEY_FN_F1) diff --git a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi index 9217ced108c4..84b0366792d4 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi @@ -341,8 +341,6 @@ ssbi@500000 { pm8058: pmic { compatible = "qcom,pm8058"; - interrupt-parent = <&tlmm>; - interrupts = <88 8>; #interrupt-cells = <2>; interrupt-controller; #address-cells = <1>;
The interrupt of SSBI PMICs is routed to the SoCs GPIO. As such, it is not a property of the SoC, it is a property of the particular board (even if it is standard and unified between all devices). Move these interrupt specifications to the board files. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts | 4 ++++ arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts | 4 ++++ arch/arm/boot/dts/qcom/qcom-msm8660.dtsi | 2 -- 3 files changed, 8 insertions(+), 2 deletions(-)