@@ -198,7 +198,7 @@ static int is31fl3190_brightness_set(struct led_classdev *cdev,
int i;
u8 ctrl = 0;
- dev_dbg(&is31->client->dev, "%s %d: %d\n", __func__, chan, brightness);
+ dev_dbg(&is31->client->dev, "channel %d: %d\n", chan, brightness);
mutex_lock(&is31->lock);
@@ -245,15 +245,14 @@ static int is31fl3190_brightness_set(struct led_classdev *cdev,
static int is31fl3196_brightness_set(struct led_classdev *cdev,
enum led_brightness brightness)
{
- struct is31fl319x_led *led = container_of(cdev, struct is31fl319x_led,
- cdev);
+ struct is31fl319x_led *led = container_of(cdev, struct is31fl319x_led, cdev);
struct is31fl319x_chip *is31 = led->chip;
int chan = led - is31->leds;
int ret;
int i;
u8 ctrl1 = 0, ctrl2 = 0;
- dev_dbg(&is31->client->dev, "%s %d: %d\n", __func__, chan, brightness);
+ dev_dbg(&is31->client->dev, "channel %d: %d\n", chan, brightness);
mutex_lock(&is31->lock);
@@ -273,8 +272,6 @@ static int is31fl3196_brightness_set(struct led_classdev *cdev,
*/
ret = regmap_read(is31->regmap, IS31FL3196_PWM(i), &pwm_value);
- dev_dbg(&is31->client->dev, "%s read %d: ret=%d: %d\n",
- __func__, i, ret, pwm_value);
on = ret >= 0 && pwm_value > LED_OFF;
if (i < 3)
@@ -404,9 +401,7 @@ static int is31fl319x_parse_dt(struct device *dev,
if (!np)
return -ENODEV;
- is31->shutdown_gpio = devm_gpiod_get_optional(dev,
- "shutdown",
- GPIOD_OUT_HIGH);
+ is31->shutdown_gpio = devm_gpiod_get_optional(dev, "shutdown", GPIOD_OUT_HIGH);
if (IS_ERR(is31->shutdown_gpio)) {
ret = PTR_ERR(is31->shutdown_gpio);
dev_err(dev, "Failed to get shutdown gpio: %d\n", ret);
@@ -493,7 +488,8 @@ static inline int is31fl3190_microamp_to_cs(struct device *dev, u32 microamp)
}
static inline int is31fl3196_microamp_to_cs(struct device *dev, u32 microamp)
-{ /* round down to nearest supported value (range check done by caller) */
+{
+ /* round down to nearest supported value (range check done by caller) */
u32 step = microamp / IS31FL3196_CURRENT_uA_STEP;
return ((IS31FL3196_CONFIG2_CS_STEP_REF - step) &
@@ -502,7 +498,8 @@ static inline int is31fl3196_microamp_to_cs(struct device *dev, u32 microamp)
}
static inline int is31fl3196_db_to_gain(u32 dezibel)
-{ /* round down to nearest supported value (range check done by caller) */
+{
+ /* round down to nearest supported value (range check done by caller) */
return dezibel / IS31FL3196_AUDIO_GAIN_DB_STEP;
}
@@ -547,8 +544,7 @@ static int is31fl319x_probe(struct i2c_client *client,
/* check for write-reply from chip (we can't read any registers) */
err = regmap_write(is31->regmap, is31->cdef->reset_reg, 0x00);
if (err < 0) {
- dev_err(&client->dev, "no response from chip write: err = %d\n",
- err);
+ dev_err(&client->dev, "no response from chip write: err = %d\n", err);
err = -EIO; /* does not answer */
goto free_mutex;
}
Fix remaining non-standard place for comments. Remove remaining dev_dbg after regmap_read in is31fl3196_brightness_set. Remove __func__ in dev_dbg calls, instead adding "channel" string to describe the first displayed value. Change remaining container_of() call to be on one line, as well as a few others. Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org> --- drivers/leds/leds-is31fl319x.c | 22 +++++++++------------- 1 file changed, 9 insertions(+), 13 deletions(-)