@@ -198,61 +198,72 @@ fpga {
syscon: syscon@10000000 {
compatible = "arm,realview-eb-syscon", "syscon", "simple-mfd";
reg = <0x10000000 0x1000>;
+ ranges = <0x0 0x10000000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
- led@08.0 {
+ led@8,0 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x01>;
label = "versatile:0";
linux,default-trigger = "heartbeat";
default-state = "on";
};
- led@08.1 {
+ led@8,1 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x02>;
label = "versatile:1";
linux,default-trigger = "mmc0";
default-state = "off";
};
- led@08.2 {
+ led@8,2 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x04>;
label = "versatile:2";
linux,default-trigger = "cpu0";
default-state = "off";
};
- led@08.3 {
+ led@8,3 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x08>;
label = "versatile:3";
default-state = "off";
};
- led@08.4 {
+ led@8,4 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x10>;
label = "versatile:4";
default-state = "off";
};
- led@08.5 {
+ led@8,5 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x20>;
label = "versatile:5";
default-state = "off";
};
- led@08.6 {
+ led@8,6 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x40>;
label = "versatile:6";
default-state = "off";
};
- led@08.7 {
+ led@8,7 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x80>;
label = "versatile:7";
@@ -216,61 +216,72 @@ soc {
syscon: syscon@10000000 {
compatible = "arm,realview-pb1176-syscon", "syscon", "simple-mfd";
reg = <0x10000000 0x1000>;
+ ranges = <0x0 0x10000000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
- led@08.0 {
+ led@8,0 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x01>;
label = "versatile:0";
linux,default-trigger = "heartbeat";
default-state = "on";
};
- led@08.1 {
+ led@8,1 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x02>;
label = "versatile:1";
linux,default-trigger = "mmc0";
default-state = "off";
};
- led@08.2 {
+ led@8,2 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x04>;
label = "versatile:2";
linux,default-trigger = "cpu0";
default-state = "off";
};
- led@08.3 {
+ led@8,3 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x08>;
label = "versatile:3";
default-state = "off";
};
- led@08.4 {
+ led@8,4 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x10>;
label = "versatile:4";
default-state = "off";
};
- led@08.5 {
+ led@8,5 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x20>;
label = "versatile:5";
default-state = "off";
};
- led@08.6 {
+ led@8,6 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x40>;
label = "versatile:6";
default-state = "off";
};
- led@08.7 {
+ led@8,7 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x80>;
label = "versatile:7";
@@ -303,64 +303,75 @@ soc {
pb11mp_syscon: syscon@10000000 {
compatible = "arm,realview-pb11mp-syscon", "syscon", "simple-mfd";
reg = <0x10000000 0x1000>;
+ ranges = <0x0 0x10000000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
- led@08.0 {
+ led@8,0 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x01>;
label = "versatile:0";
linux,default-trigger = "heartbeat";
default-state = "on";
};
- led@08.1 {
+ led@8,1 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x02>;
label = "versatile:1";
linux,default-trigger = "mmc0";
default-state = "off";
};
- led@08.2 {
+ led@8,2 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x04>;
label = "versatile:2";
linux,default-trigger = "cpu0";
default-state = "off";
};
- led@08.3 {
+ led@8,3 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x08>;
label = "versatile:3";
linux,default-trigger = "cpu1";
default-state = "off";
};
- led@08.4 {
+ led@8,4 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x10>;
label = "versatile:4";
linux,default-trigger = "cpu2";
default-state = "off";
};
- led@08.5 {
+ led@8,5 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x20>;
label = "versatile:5";
linux,default-trigger = "cpu3";
default-state = "off";
};
- led@08.6 {
+ led@8,6 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x40>;
label = "versatile:6";
default-state = "off";
};
- led@08.7 {
+ led@8,7 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x80>;
label = "versatile:7";
@@ -220,61 +220,72 @@ soc: soc {
syscon: syscon@10000000 {
compatible = "arm,realview-pbx-syscon", "syscon", "simple-mfd";
reg = <0x10000000 0x1000>;
+ ranges = <0x0 0x10000000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
- led@08.0 {
+ led@8,0 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x01>;
label = "versatile:0";
linux,default-trigger = "heartbeat";
default-state = "on";
};
- led@08.1 {
+ led@8,1 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x02>;
label = "versatile:1";
linux,default-trigger = "mmc0";
default-state = "off";
};
- led@08.2 {
+ led@8,2 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x04>;
label = "versatile:2";
linux,default-trigger = "cpu0";
default-state = "off";
};
- led@08.3 {
+ led@8,3 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x08>;
label = "versatile:3";
default-state = "off";
};
- led@08.4 {
+ led@8,4 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x10>;
label = "versatile:4";
default-state = "off";
};
- led@08.5 {
+ led@8,5 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x20>;
label = "versatile:5";
default-state = "off";
};
- led@08.6 {
+ led@8,6 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x40>;
label = "versatile:6";
default-state = "off";
};
- led@08.7 {
+ led@8,7 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x80>;
label = "versatile:7";
@@ -15,10 +15,14 @@ memory {
core-module@10000000 {
compatible = "arm,core-module-integrator", "syscon", "simple-mfd";
reg = <0x10000000 0x200>;
+ ranges = <0x0 0x10000000 0x200>;
+ #address-cells = <1>;
+ #size-cells = <1>;
/* Use core module LED to indicate CPU load */
- led@c.0 {
+ led@c,0 {
compatible = "register-bit-led";
+ reg = <0x0c 0x04>;
offset = <0x0c>;
mask = <0x01>;
label = "integrator:core_module";
@@ -104,35 +108,42 @@ kmi@19000000 {
interrupts = <4>;
};
- syscon {
+ syscon@1a000000 {
/* Debug registers mapped as syscon */
compatible = "syscon", "simple-mfd";
reg = <0x1a000000 0x10>;
+ ranges = <0x0 0x1a000000 0x10>;
+ #address-cells = <1>;
+ #size-cells = <1>;
- led@4.0 {
+ led@4,0 {
compatible = "register-bit-led";
+ reg = <0x04 0x04>;
offset = <0x04>;
mask = <0x01>;
label = "integrator:green0";
linux,default-trigger = "heartbeat";
default-state = "on";
};
- led@4.1 {
+ led@4,1 {
compatible = "register-bit-led";
+ reg = <0x04 0x04>;
offset = <0x04>;
mask = <0x02>;
label = "integrator:yellow";
default-state = "off";
};
- led@4.2 {
+ led@4,2 {
compatible = "register-bit-led";
+ reg = <0x04 0x04>;
offset = <0x04>;
mask = <0x04>;
label = "integrator:red";
default-state = "off";
};
- led@4.3 {
+ led@4,3 {
compatible = "register-bit-led";
+ reg = <0x04 0x04>;
offset = <0x04>;
mask = <0x08>;
label = "integrator:green1";
@@ -216,8 +216,13 @@ fpgaio@8000 {
compatible = "syscon", "simple-mfd";
reg = <0x8000 0x10>;
- led0 {
+ ranges = <0x0 0x8000 0x10>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ led@0,0 {
compatible = "register-bit-led";
+ reg = <0x00 0x04>;
offset = <0x0>;
mask = <0x01>;
label = "userled:0";
@@ -225,8 +230,9 @@ led0 {
default-state = "on";
};
- led1 {
+ led@0,1 {
compatible = "register-bit-led";
+ reg = <0x00 0x04>;
offset = <0x0>;
mask = <0x02>;
label = "userled:1";
@@ -13,9 +13,13 @@ / {
syscon@27000000 {
compatible = "arm,versatile-ib2-syscon", "syscon", "simple-mfd";
reg = <0x27000000 0x4>;
+ ranges = <0x0 0x27000000 0x4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
- led@00.4 {
+ led@0,4 {
compatible = "register-bit-led";
+ reg = <0x00 0x04>;
offset = <0x00>;
mask = <0x10>;
label = "versatile-ib2:0";
@@ -70,61 +70,72 @@ vga_con_in: endpoint {
core-module@10000000 {
compatible = "arm,core-module-versatile", "syscon", "simple-mfd";
reg = <0x10000000 0x200>;
+ ranges = <0x0 0x10000000 0x200>;
+ #address-cells = <1>;
+ #size-cells = <1>;
- led@08.0 {
+ led@8,0 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x01>;
label = "versatile:0";
linux,default-trigger = "heartbeat";
default-state = "on";
};
- led@08.1 {
+ led@8,1 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x02>;
label = "versatile:1";
linux,default-trigger = "mmc0";
default-state = "off";
};
- led@08.2 {
+ led@8,2 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x04>;
label = "versatile:2";
linux,default-trigger = "cpu0";
default-state = "off";
};
- led@08.3 {
+ led@8,3 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x08>;
label = "versatile:3";
default-state = "off";
};
- led@08.4 {
+ led@8,4 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x10>;
label = "versatile:4";
default-state = "off";
};
- led@08.5 {
+ led@8,5 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x20>;
label = "versatile:5";
default-state = "off";
};
- led@08.6 {
+ led@8,6 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x40>;
label = "versatile:6";
default-state = "off";
};
- led@08.7 {
+ led@8,7 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x80>;
label = "versatile:7";
@@ -153,64 +153,75 @@ v2m_sysctl: sysctl@20000 {
apbregs@10000 {
compatible = "syscon", "simple-mfd";
reg = <0x010000 0x1000>;
+ ranges = <0x0 0x10000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
- led0 {
+ led@8,0 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x01>;
label = "vexpress:0";
linux,default-trigger = "heartbeat";
default-state = "on";
};
- led1 {
+ led@8,1 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x02>;
label = "vexpress:1";
linux,default-trigger = "mmc0";
default-state = "off";
};
- led2 {
+ led@8,2 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x04>;
label = "vexpress:2";
linux,default-trigger = "cpu0";
default-state = "off";
};
- led3 {
+ led@8,3 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x08>;
label = "vexpress:3";
linux,default-trigger = "cpu1";
default-state = "off";
};
- led4 {
+ led@8,4 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x10>;
label = "vexpress:4";
linux,default-trigger = "cpu2";
default-state = "off";
};
- led5 {
+ led@8,5 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x20>;
label = "vexpress:5";
linux,default-trigger = "cpu3";
default-state = "off";
};
- led6 {
+ led@8,6 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x40>;
label = "vexpress:6";
default-state = "off";
};
- led7 {
+ led@8,7 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x80>;
label = "vexpress:7";
Add a 'reg' entry for register-bit-led nodes on the Arm Ltd platforms. The 'reg' entry is the LED control register address. With this, the node name can be updated to use a generic node name, 'led', and a unit-address. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Rob Herring <robh@kernel.org> --- arch/arm/boot/dts/arm-realview-eb.dtsi | 27 +++++++++++++------ arch/arm/boot/dts/arm-realview-pb1176.dts | 27 +++++++++++++------ arch/arm/boot/dts/arm-realview-pb11mp.dts | 27 +++++++++++++------ arch/arm/boot/dts/arm-realview-pbx.dtsi | 27 +++++++++++++------ arch/arm/boot/dts/integrator.dtsi | 23 +++++++++++----- arch/arm/boot/dts/mps2.dtsi | 10 +++++-- arch/arm/boot/dts/versatile-ab-ib2.dts | 6 ++++- arch/arm/boot/dts/versatile-ab.dts | 27 +++++++++++++------ arch/arm64/boot/dts/arm/juno-motherboard.dtsi | 27 +++++++++++++------ 9 files changed, 144 insertions(+), 57 deletions(-) -- 2.30.2