mbox series

[v8,0/2] Make AUX gpio pin optional for ktd2692

Message ID 20220505152521.71019-1-markuss.broks@gmail.com
Headers show
Series Make AUX gpio pin optional for ktd2692 | expand

Message

Markuss Broks May 5, 2022, 3:25 p.m. UTC 
Some appliances of ktd2692 don't have the AUX pin connected to
a GPIO. Specifically, Samsung Galaxy J5 (2015), which uses ktd2692
for driving the front flash LED, has the pin not connected anywhere on
schematics. Make specifying the AUX pin optional, since it is additional
functionality and only affects the amount of current going through the LED.

Also convert the txt device-tree bindings to yaml.

v2:
- fix the dt_binding_check
v3:
- set the aux_gpio to NULL to avoid passing ERR_PTR as a gpio
v4:
- maintainership -> maintenance (description)
- remove the if (led->aux_gpio)
- use devm_gpiod_get_optional for aux gpio
v5:
- use ret to pass a correct error return code (Christophe)
v6:
- use PTR_ERR properly (when IS_ERR is true) (Christophe)
v6-a:
- ended up being a mess, corrected-v2 should have proper tags now
v7:
- drop the MAINTAINERS part
v8:
- introduce a patch changing dev_err in gpio access to dev_err_probe

Markuss Broks (2):
  dt-bindings: leds: convert ktd2692 bindings to yaml
  leds: ktd2692: Make aux-gpios optional

 .../bindings/leds/kinetic,ktd2692.yaml        | 87 +++++++++++++++++++
 .../devicetree/bindings/leds/leds-ktd2692.txt | 50 -----------
 MAINTAINERS                                   |  6 ++
 drivers/leds/flash/leds-ktd2692.c             | 18 ++--
 4 files changed, 103 insertions(+), 58 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/leds/kinetic,ktd2692.yaml
 delete mode 100644 Documentation/devicetree/bindings/leds/leds-ktd2692.txt