mbox series

[v3,0/2] leds: add ktd20xx LED driver support

Message ID 20220117124741.7165-1-fe@dev.tdt.de
Headers show
Series leds: add ktd20xx LED driver support | expand

Message

Florian Eckert Jan. 17, 2022, 12:47 p.m. UTC
Introducing the KTD2061/58/59/60 RGB LED drivers. The difference in
these are the address numbers on the I2C bus that the device listens to.

Due to the hardware limitation, we can only set 7 colors and the color
black (LED off) for each LED independently and not the full RGB range.

v1: Initial send
v2: Remove variant 1 from source
v3: Changes requested by Andy Shevchenko added. Thanks for reviewing
  - Removing OF dependency
  - Add missing includes
  - Use device_property_read_u32() instead of fwnode_property_read_u32()
  - Use one liner function pattern <test> ? <value-true> : <value-false>
  - Remove switch case call for intensity color selection use BIT()
    instead
  - Remove not needed fwnode_handle_put() in ktd200xx_probe_dt() function
  - Use dev_get_drvdata() instead of i2c_get_clientdata() function call
  - Use sysfs_emit() function call
  - Use kstrtobool() function call
  - Remove not needed comma after last array element
  - Use dev_err_probe() instead of dev_error() in driver probe function
  - Do not use dev_group registration function set .dev_groups directly
    into ktd20xx_driver struct.

Florian Eckert (2):
  leds: ktd20xx: Extension of the KTD20xx family of LED drivers from
    Kinetic
  dt: bindings: KTD20xx: Introduce the ktd20xx family of RGB drivers

 .../bindings/leds/leds-ktd20xx.yaml           | 130 ++++
 MAINTAINERS                                   |   7 +
 drivers/leds/Kconfig                          |  12 +
 drivers/leds/Makefile                         |   1 +
 drivers/leds/leds-ktd20xx.c                   | 580 ++++++++++++++++++
 5 files changed, 730 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/leds-ktd20xx.yaml
 create mode 100644 drivers/leds/leds-ktd20xx.c