| Message ID | 20240917023525.2571082-3-mohan.prasad@microchip.com |
|---|---|
| State | New |
| Headers | show |
| Series | nic_basic_tests: Add selftest for doing basic tests of NIC driver | expand |
Mohan Prasad J wrote: > Add selftest case for testing the speed and duplex state of > local NIC driver and the partner based on the supported > link modes obtained from the ethtool. Speed and duplex states > are varied and verified using ethtool. > > Signed-off-by: Mohan Prasad J <mohan.prasad@microchip.com> > --- > .../drivers/net/hw/nic_basic_tests.py | 46 +++++++++++++++++++ > 1 file changed, 46 insertions(+) > > diff --git a/tools/testing/selftests/drivers/net/hw/nic_basic_tests.py b/tools/testing/selftests/drivers/net/hw/nic_basic_tests.py > index 27f780032..ff46f2406 100644 > --- a/tools/testing/selftests/drivers/net/hw/nic_basic_tests.py > +++ b/tools/testing/selftests/drivers/net/hw/nic_basic_tests.py > @@ -42,6 +42,14 @@ from lib.py import ethtool > """Global variables""" > common_link_modes = [] > > +def check_autonegotiation(ifname: str) -> None: > + autoneg = get_ethtool_content(ifname, "Supports auto-negotiation:") > + partner_autoneg = get_ethtool_content(ifname, "Link partner advertised auto-negotiation:") > + > + """Check if auto-neg supported by local and partner NIC""" > + if autoneg[0] != "Yes" or partner_autoneg[0] != "Yes": > + raise KsftSkipEx(f"Interface {ifname} or partner does not support auto-negotiation") > + > def get_ethtool_content(ifname: str, field: str): > capture = False > content = [] > @@ -112,6 +120,25 @@ def verify_autonegotiation(ifname: str, expected_state: str) -> None: > > ksft_eq(actual_state, expected_state) > > +def set_speed_and_duplex(ifname: str, speed: str, duplex: str) -> None: > + """Set the speed and duplex state for the interface""" > + process = ethtool(f"--change {ifname} speed {speed} duplex {duplex} autoneg on") > + > + if process.ret != 0: > + raise KsftFailEx(f"Not able to set speed and duplex parameters for {ifname}") > + ksft_pr(f"Speed: {speed} Mbps, Duplex: {duplex} set for Interface: {ifname}") > + > +def verify_speed_and_duplex(ifname: str, expected_speed: str, expected_duplex: str) -> None: > + verify_link_up(ifname) > + """Verifying the speed and duplex state for the interface""" > + with open(f"/sys/class/net/{ifname}/speed", "r") as fp: > + actual_speed = fp.read().strip() > + with open(f"/sys/class/net/{ifname}/duplex", "r") as fp: > + actual_duplex = fp.read().strip() > + > + ksft_eq(actual_speed, expected_speed) > + ksft_eq(actual_duplex, expected_duplex) > + > def test_link_modes(cfg) -> None: > global common_link_modes > link_modes = get_ethtool_content(cfg.ifname, "Supported link modes:") > @@ -136,6 +163,25 @@ def test_autonegotiation(cfg) -> None: > else: > raise KsftSkipEx(f"Auto-Negotiation is not supported for interface {cfg.ifname}") > > +def test_network_speed(cfg) -> None: > + check_autonegotiation(cfg.ifname) > + if not common_link_modes: > + KsftSkipEx("No common link modes exist") > + speeds, duplex_modes = get_speed_duplex(common_link_modes) > + > + if speeds and duplex_modes and len(speeds) == len(duplex_modes): > + for idx in range(len(speeds)): > + speed = speeds[idx] > + duplex = duplex_modes[idx] > + set_speed_and_duplex(cfg.ifname, speed, duplex) > + time.sleep(sleep_time) > + verify_speed_and_duplex(cfg.ifname, speed, duplex) > + else: > + if not speeds or not duplex_modes: > + KsftSkipEx(f"No supported speeds or duplex modes found for interface {cfg.ifname}") > + else: > + KsftSkipEx("Mismatch in the number of speeds and duplex modes") > + Do these tests reset configuration to their original state? More high level: basic test is not very descriptive. Can they have a more precise name? Perhaps link layer operations or link layer config?
Hi Willem, Thanks for the review comments. > EXTERNAL EMAIL: Do not click links or open attachments unless you know the > content is safe > > Mohan Prasad J wrote: > > Add selftest case for testing the speed and duplex state of local NIC > > driver and the partner based on the supported link modes obtained from > > the ethtool. Speed and duplex states are varied and verified using > > ethtool. > > > > Signed-off-by: Mohan Prasad J <mohan.prasad@microchip.com> > > --- > > .../drivers/net/hw/nic_basic_tests.py | 46 +++++++++++++++++++ > > 1 file changed, 46 insertions(+) > > > > diff --git a/tools/testing/selftests/drivers/net/hw/nic_basic_tests.py > > b/tools/testing/selftests/drivers/net/hw/nic_basic_tests.py > > index 27f780032..ff46f2406 100644 > > --- a/tools/testing/selftests/drivers/net/hw/nic_basic_tests.py > > +++ b/tools/testing/selftests/drivers/net/hw/nic_basic_tests.py > > @@ -42,6 +42,14 @@ from lib.py import ethtool """Global variables""" > > common_link_modes = [] > > > > +def check_autonegotiation(ifname: str) -> None: > > + autoneg = get_ethtool_content(ifname, "Supports auto-negotiation:") > > + partner_autoneg = get_ethtool_content(ifname, "Link partner > > +advertised auto-negotiation:") > > + > > + """Check if auto-neg supported by local and partner NIC""" > > + if autoneg[0] != "Yes" or partner_autoneg[0] != "Yes": > > + raise KsftSkipEx(f"Interface {ifname} or partner does not > > + support auto-negotiation") > > + > > def get_ethtool_content(ifname: str, field: str): > > capture = False > > content = [] > > @@ -112,6 +120,25 @@ def verify_autonegotiation(ifname: str, > expected_state: str) -> None: > > > > ksft_eq(actual_state, expected_state) > > > > +def set_speed_and_duplex(ifname: str, speed: str, duplex: str) -> None: > > + """Set the speed and duplex state for the interface""" > > + process = ethtool(f"--change {ifname} speed {speed} duplex > > +{duplex} autoneg on") > > + > > + if process.ret != 0: > > + raise KsftFailEx(f"Not able to set speed and duplex parameters for > {ifname}") > > + ksft_pr(f"Speed: {speed} Mbps, Duplex: {duplex} set for > > + Interface: {ifname}") > > + > > +def verify_speed_and_duplex(ifname: str, expected_speed: str, > expected_duplex: str) -> None: > > + verify_link_up(ifname) > > + """Verifying the speed and duplex state for the interface""" > > + with open(f"/sys/class/net/{ifname}/speed", "r") as fp: > > + actual_speed = fp.read().strip() > > + with open(f"/sys/class/net/{ifname}/duplex", "r") as fp: > > + actual_duplex = fp.read().strip() > > + > > + ksft_eq(actual_speed, expected_speed) > > + ksft_eq(actual_duplex, expected_duplex) > > + > > def test_link_modes(cfg) -> None: > > global common_link_modes > > link_modes = get_ethtool_content(cfg.ifname, "Supported link > > modes:") @@ -136,6 +163,25 @@ def test_autonegotiation(cfg) -> None: > > else: > > raise KsftSkipEx(f"Auto-Negotiation is not supported for > > interface {cfg.ifname}") > > > > +def test_network_speed(cfg) -> None: > > + check_autonegotiation(cfg.ifname) > > + if not common_link_modes: > > + KsftSkipEx("No common link modes exist") > > + speeds, duplex_modes = get_speed_duplex(common_link_modes) > > + > > + if speeds and duplex_modes and len(speeds) == len(duplex_modes): > > + for idx in range(len(speeds)): > > + speed = speeds[idx] > > + duplex = duplex_modes[idx] > > + set_speed_and_duplex(cfg.ifname, speed, duplex) > > + time.sleep(sleep_time) > > + verify_speed_and_duplex(cfg.ifname, speed, duplex) > > + else: > > + if not speeds or not duplex_modes: > > + KsftSkipEx(f"No supported speeds or duplex modes found for > interface {cfg.ifname}") > > + else: > > + KsftSkipEx("Mismatch in the number of speeds and duplex > > + modes") > > + > > Do these tests reset configuration to their original state? Currently these tests do not reset configuration to their original state. However resetting would be a good idea, I will either do it here (or) at the end of the tests. > > More high level: basic test is not very descriptive. Can they have a more > precise name? Perhaps link layer operations or link layer config? I will have a check on the naming and update it accordingly.
diff --git a/tools/testing/selftests/drivers/net/hw/nic_basic_tests.py b/tools/testing/selftests/drivers/net/hw/nic_basic_tests.py index 27f780032..ff46f2406 100644 --- a/tools/testing/selftests/drivers/net/hw/nic_basic_tests.py +++ b/tools/testing/selftests/drivers/net/hw/nic_basic_tests.py @@ -42,6 +42,14 @@ from lib.py import ethtool """Global variables""" common_link_modes = [] +def check_autonegotiation(ifname: str) -> None: + autoneg = get_ethtool_content(ifname, "Supports auto-negotiation:") + partner_autoneg = get_ethtool_content(ifname, "Link partner advertised auto-negotiation:") + + """Check if auto-neg supported by local and partner NIC""" + if autoneg[0] != "Yes" or partner_autoneg[0] != "Yes": + raise KsftSkipEx(f"Interface {ifname} or partner does not support auto-negotiation") + def get_ethtool_content(ifname: str, field: str): capture = False content = [] @@ -112,6 +120,25 @@ def verify_autonegotiation(ifname: str, expected_state: str) -> None: ksft_eq(actual_state, expected_state) +def set_speed_and_duplex(ifname: str, speed: str, duplex: str) -> None: + """Set the speed and duplex state for the interface""" + process = ethtool(f"--change {ifname} speed {speed} duplex {duplex} autoneg on") + + if process.ret != 0: + raise KsftFailEx(f"Not able to set speed and duplex parameters for {ifname}") + ksft_pr(f"Speed: {speed} Mbps, Duplex: {duplex} set for Interface: {ifname}") + +def verify_speed_and_duplex(ifname: str, expected_speed: str, expected_duplex: str) -> None: + verify_link_up(ifname) + """Verifying the speed and duplex state for the interface""" + with open(f"/sys/class/net/{ifname}/speed", "r") as fp: + actual_speed = fp.read().strip() + with open(f"/sys/class/net/{ifname}/duplex", "r") as fp: + actual_duplex = fp.read().strip() + + ksft_eq(actual_speed, expected_speed) + ksft_eq(actual_duplex, expected_duplex) + def test_link_modes(cfg) -> None: global common_link_modes link_modes = get_ethtool_content(cfg.ifname, "Supported link modes:") @@ -136,6 +163,25 @@ def test_autonegotiation(cfg) -> None: else: raise KsftSkipEx(f"Auto-Negotiation is not supported for interface {cfg.ifname}") +def test_network_speed(cfg) -> None: + check_autonegotiation(cfg.ifname) + if not common_link_modes: + KsftSkipEx("No common link modes exist") + speeds, duplex_modes = get_speed_duplex(common_link_modes) + + if speeds and duplex_modes and len(speeds) == len(duplex_modes): + for idx in range(len(speeds)): + speed = speeds[idx] + duplex = duplex_modes[idx] + set_speed_and_duplex(cfg.ifname, speed, duplex) + time.sleep(sleep_time) + verify_speed_and_duplex(cfg.ifname, speed, duplex) + else: + if not speeds or not duplex_modes: + KsftSkipEx(f"No supported speeds or duplex modes found for interface {cfg.ifname}") + else: + KsftSkipEx("Mismatch in the number of speeds and duplex modes") + def main() -> None: with NetDrvEpEnv(__file__) as cfg: ksft_run(globs=globals(), case_pfx={"test_"}, args=(cfg,))
Add selftest case for testing the speed and duplex state of local NIC driver and the partner based on the supported link modes obtained from the ethtool. Speed and duplex states are varied and verified using ethtool. Signed-off-by: Mohan Prasad J <mohan.prasad@microchip.com> --- .../drivers/net/hw/nic_basic_tests.py | 46 +++++++++++++++++++ 1 file changed, 46 insertions(+)