diff mbox series

[net,1/2] net/sched: taprio: make q->picos_per_byte available to fill_sched_entry()

Message ID 20240527153955.553333-1-vladimir.oltean@nxp.com
State Accepted
Commit e634134180885574d1fe7aa162777ba41e7fcd5b
Headers show
Series [net,1/2] net/sched: taprio: make q->picos_per_byte available to fill_sched_entry() | expand

Commit Message

Vladimir Oltean May 27, 2024, 3:39 p.m. UTC
In commit b5b73b26b3ca ("taprio: Fix allowing too small intervals"), a
comparison of user input against length_to_duration(q, ETH_ZLEN) was
introduced, to avoid RCU stalls due to frequent hrtimers.

The implementation of length_to_duration() depends on q->picos_per_byte
being set for the link speed. The blamed commit in the Fixes: tag has
moved this too late, so the checks introduced above are ineffective.
The q->picos_per_byte is zero at parse_taprio_schedule() ->
parse_sched_list() -> parse_sched_entry() -> fill_sched_entry() time.

Move the taprio_set_picos_per_byte() call as one of the first things in
taprio_change(), before the bulk of the netlink attribute parsing is
done. That's because it is needed there.

Add a selftest to make sure the issue doesn't get reintroduced.

Fixes: 09dbdf28f9f9 ("net/sched: taprio: fix calculation of maximum gate durations")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
 net/sched/sch_taprio.c                        |  4 +++-
 .../tc-testing/tc-tests/qdiscs/taprio.json    | 22 +++++++++++++++++++
 2 files changed, 25 insertions(+), 1 deletion(-)

Comments

Eric Dumazet May 28, 2024, 5:41 a.m. UTC | #1
On Mon, May 27, 2024 at 5:40 PM Vladimir Oltean <vladimir.oltean@nxp.com> wrote:
>
> In commit b5b73b26b3ca ("taprio: Fix allowing too small intervals"), a
> comparison of user input against length_to_duration(q, ETH_ZLEN) was
> introduced, to avoid RCU stalls due to frequent hrtimers.
>
> The implementation of length_to_duration() depends on q->picos_per_byte
> being set for the link speed. The blamed commit in the Fixes: tag has
> moved this too late, so the checks introduced above are ineffective.
> The q->picos_per_byte is zero at parse_taprio_schedule() ->
> parse_sched_list() -> parse_sched_entry() -> fill_sched_entry() time.
>
> Move the taprio_set_picos_per_byte() call as one of the first things in
> taprio_change(), before the bulk of the netlink attribute parsing is
> done. That's because it is needed there.
>
> Add a selftest to make sure the issue doesn't get reintroduced.
>
> Fixes: 09dbdf28f9f9 ("net/sched: taprio: fix calculation of maximum gate durations")
> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>

Reviewed-by: Eric Dumazet <edumazet@google.com>

Thanks!
diff mbox series

Patch

diff --git a/net/sched/sch_taprio.c b/net/sched/sch_taprio.c
index 1ab17e8a7260..118915055360 100644
--- a/net/sched/sch_taprio.c
+++ b/net/sched/sch_taprio.c
@@ -1848,6 +1848,9 @@  static int taprio_change(struct Qdisc *sch, struct nlattr *opt,
 	}
 	q->flags = taprio_flags;
 
+	/* Needed for length_to_duration() during netlink attribute parsing */
+	taprio_set_picos_per_byte(dev, q);
+
 	err = taprio_parse_mqprio_opt(dev, mqprio, extack, q->flags);
 	if (err < 0)
 		return err;
@@ -1907,7 +1910,6 @@  static int taprio_change(struct Qdisc *sch, struct nlattr *opt,
 	if (err < 0)
 		goto free_sched;
 
-	taprio_set_picos_per_byte(dev, q);
 	taprio_update_queue_max_sdu(q, new_admin, stab);
 
 	if (FULL_OFFLOAD_IS_ENABLED(q->flags))
diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/taprio.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/taprio.json
index 12da0a939e3e..8f12f00a4f57 100644
--- a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/taprio.json
+++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/taprio.json
@@ -132,6 +132,28 @@ 
             "echo \"1\" > /sys/bus/netdevsim/del_device"
         ]
     },
+    {
+        "id": "6f62",
+        "name": "Add taprio Qdisc with too short interval",
+        "category": [
+            "qdisc",
+            "taprio"
+        ],
+        "plugins": {
+            "requires": "nsPlugin"
+        },
+        "setup": [
+            "echo \"1 1 8\" > /sys/bus/netdevsim/new_device"
+        ],
+        "cmdUnderTest": "$TC qdisc add dev $ETH root handle 1: taprio num_tc 2 queues 1@0 1@1 sched-entry S 01 300 sched-entry S 02 1700 clockid CLOCK_TAI",
+        "expExitCode": "2",
+        "verifyCmd": "$TC qdisc show dev $ETH",
+        "matchPattern": "qdisc taprio 1: root refcnt",
+        "matchCount": "0",
+        "teardown": [
+            "echo \"1\" > /sys/bus/netdevsim/del_device"
+        ]
+    },
     {
         "id": "3e1e",
         "name": "Add taprio Qdisc with an invalid cycle-time",