diff mbox series

[1/2] selftests/netfilter: use socklen_t, not a signed int, for len

Message ID 20240505214716.62304-1-jhubbard@nvidia.com
State New
Headers show
Series [1/2] selftests/netfilter: use socklen_t, not a signed int, for len | expand

Commit Message

John Hubbard May 5, 2024, 9:47 p.m. UTC
When building with clang, via:

    make LLVM=1 -C tools/testing/selftest

...clang warns about using "int *" interchangeably with "socklen_t *".

clang is correct, so fix this by declaring len as a socklen_t, instead
of as an int.

Signed-off-by: John Hubbard <jhubbard@nvidia.com>
---
 tools/testing/selftests/netfilter/sctp_collision.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)


base-commit: f462ae0edd3703edd6f22fe41d336369c38b884b
prerequisite-patch-id: b901ece2a5b78503e2fb5480f20e304d36a0ea27

Comments

John Hubbard May 6, 2024, 6:29 p.m. UTC | #1
On 5/6/24 7:41 AM, Felix Huettner wrote:
> On Sun, May 05, 2024 at 02:47:16PM -0700, John Hubbard wrote:
...
>  > @@ -207,6 +210,7 @@ static int conntrack_data_generate_v6(struct 
> mnl_socket *sock,
>  >  static int count_entries(const struct nlmsghdr *nlh, void *data)
>  >  {
>  >         reply_counter++;
>  > +       return 0;
> 
> Hi John,
> 
> This will need to return MNL_CB_OK.
> Otherwise mnl_cb_run below will abort early and the connection count
> will be wrong.
> 

Thanks for catching that, I'm sending a v2 with that fix.

I was thinking about it, and expected that the pre-existing code
appeared to work because the return value was some non-zero garbage
value scrounged off of the stack (or %rax, for example on x86).

However, just a quick test showed that *any* value (O, 1==MNL_CB_OK,
or no value at all) allows the test to report success...oh, I see,
it's reporting PASSED when it really ought to say SKIPPED:

$ ./conntrack_dump_flush
TAP version 13
1..3
# Starting 3 tests from 1 test cases.
#  RUN           conntrack_dump_flush.test_dump_by_zone ...
mnl_socket_open: Protocol not supported
#            OK  conntrack_dump_flush.test_dump_by_zone
ok 1 conntrack_dump_flush.test_dump_by_zone
#  RUN           conntrack_dump_flush.test_flush_by_zone ...
mnl_socket_open: Protocol not supported
#            OK  conntrack_dump_flush.test_flush_by_zone
ok 2 conntrack_dump_flush.test_flush_by_zone
#  RUN           conntrack_dump_flush.test_flush_by_zone_default ...
mnl_socket_open: Protocol not supported
#            OK  conntrack_dump_flush.test_flush_by_zone_default
ok 3 conntrack_dump_flush.test_flush_by_zone_default
# PASSED: 3 / 3 tests passed.
# Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0

As long as we are looking at this, what do you think about
this:

diff --git a/tools/testing/selftests/netfilter/conntrack_dump_flush.c 
b/tools/testing/selftests/netfilter/conntrack_dump_flush.c
index e9df4ae14e16..4a73afad4de4 100644
--- a/tools/testing/selftests/netfilter/conntrack_dump_flush.c
+++ b/tools/testing/selftests/netfilter/conntrack_dump_flush.c
@@ -317,12 +317,12 @@ FIXTURE_SETUP(conntrack_dump_flush)
         self->sock = mnl_socket_open(NETLINK_NETFILTER);
         if (!self->sock) {
                 perror("mnl_socket_open");
-               exit(EXIT_FAILURE);
+               SKIP(exit(EXIT_FAILURE), "mnl_socket_open() failed");
         }

         if (mnl_socket_bind(self->sock, 0, MNL_SOCKET_AUTOPID) < 0) {
                 perror("mnl_socket_bind");
-               exit(EXIT_FAILURE);
+               SKIP(exit(EXIT_FAILURE), "mnl_socket_bind() failed");
         }

         ret = conntracK_count_zone(self->sock, TEST_ZONE_ID);

...which changes the above output, to:

$  ./conntrack_dump_flush
TAP version 13
1..3
# Starting 3 tests from 1 test cases.
#  RUN           conntrack_dump_flush.test_dump_by_zone ...
mnl_socket_open: Protocol not supported
#      SKIP      mnl_socket_open() failed
#            OK  conntrack_dump_flush.test_dump_by_zone
ok 1 conntrack_dump_flush.test_dump_by_zone # SKIP mnl_socket_open() failed
#  RUN           conntrack_dump_flush.test_flush_by_zone ...
mnl_socket_open: Protocol not supported
#      SKIP      mnl_socket_open() failed
#            OK  conntrack_dump_flush.test_flush_by_zone
ok 2 conntrack_dump_flush.test_flush_by_zone # SKIP mnl_socket_open() failed
#  RUN           conntrack_dump_flush.test_flush_by_zone_default ...
mnl_socket_open: Protocol not supported
#      SKIP      mnl_socket_open() failed
#            OK  conntrack_dump_flush.test_flush_by_zone_default
ok 3 conntrack_dump_flush.test_flush_by_zone_default # SKIP 
mnl_socket_open() failed
# PASSED: 3 / 3 tests passed.
# Totals: pass:0 fail:0 xfail:0 xpass:0 skip:3 error:0

?

thanks,
John Hubbard May 7, 2024, 5:05 p.m. UTC | #2
On 5/7/24 1:36 AM, Felix Huettner wrote:
>  >
>  > As long as we are looking at this, what do you think about
>  > this:
>  >
>  > diff --git a/tools/testing/selftests/netfilter/conntrack_dump_flush.c
>  > b/tools/testing/selftests/netfilter/conntrack_dump_flush.c
>  > index e9df4ae14e16..4a73afad4de4 100644
>  > --- a/tools/testing/selftests/netfilter/conntrack_dump_flush.c
>  > +++ b/tools/testing/selftests/netfilter/conntrack_dump_flush.c
>  > @@ -317,12 +317,12 @@ FIXTURE_SETUP(conntrack_dump_flush)
>  >         self->sock = mnl_socket_open(NETLINK_NETFILTER);
>  >         if (!self->sock) {
>  >                 perror("mnl_socket_open");
>  > -               exit(EXIT_FAILURE);
>  > +               SKIP(exit(EXIT_FAILURE), "mnl_socket_open() failed");
>  >         }
>  >
>  >         if (mnl_socket_bind(self->sock, 0, MNL_SOCKET_AUTOPID) < 0) {
>  >                 perror("mnl_socket_bind");
>  > -               exit(EXIT_FAILURE);
>  > +               SKIP(exit(EXIT_FAILURE), "mnl_socket_bind() failed");
>  >         }
>  >
>  >         ret = conntracK_count_zone(self->sock, TEST_ZONE_ID);
>  >
>  > ...which changes the above output, to:
>  >
>  > $  ./conntrack_dump_flush
>  > TAP version 13
>  > 1..3
>  > # Starting 3 tests from 1 test cases.
>  > #  RUN           conntrack_dump_flush.test_dump_by_zone ...
>  > mnl_socket_open: Protocol not supported
>  > #      SKIP      mnl_socket_open() failed
>  > #            OK  conntrack_dump_flush.test_dump_by_zone
>  > ok 1 conntrack_dump_flush.test_dump_by_zone # SKIP mnl_socket_open() 
> failed
>  > #  RUN           conntrack_dump_flush.test_flush_by_zone ...
>  > mnl_socket_open: Protocol not supported
>  > #      SKIP      mnl_socket_open() failed
>  > #            OK  conntrack_dump_flush.test_flush_by_zone
>  > ok 2 conntrack_dump_flush.test_flush_by_zone # SKIP mnl_socket_open() 
> failed
>  > #  RUN           conntrack_dump_flush.test_flush_by_zone_default ...
>  > mnl_socket_open: Protocol not supported
>  > #      SKIP      mnl_socket_open() failed
>  > #            OK  conntrack_dump_flush.test_flush_by_zone_default
>  > ok 3 conntrack_dump_flush.test_flush_by_zone_default # SKIP
>  > mnl_socket_open() failed
>  > # PASSED: 3 / 3 tests passed.
>  > # Totals: pass:0 fail:0 xfail:0 xpass:0 skip:3 error:0
>  >
>  > ?
> 
> lgtm
> 

OK, I'll send that out, appreciate your looking at it.

thanks,
diff mbox series

Patch

diff --git a/tools/testing/selftests/netfilter/sctp_collision.c b/tools/testing/selftests/netfilter/sctp_collision.c
index 21bb1cfd8a85..91df996367e9 100644
--- a/tools/testing/selftests/netfilter/sctp_collision.c
+++ b/tools/testing/selftests/netfilter/sctp_collision.c
@@ -9,7 +9,8 @@ 
 int main(int argc, char *argv[])
 {
 	struct sockaddr_in saddr = {}, daddr = {};
-	int sd, ret, len = sizeof(daddr);
+	int sd, ret;
+	socklen_t len = sizeof(daddr);
 	struct timeval tv = {25, 0};
 	char buf[] = "hello";