@@ -1556,14 +1556,10 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id)
if (ret)
return ret;
- ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW);
+ ret = devm_hid_hw_start_and_open(hdev, HID_CONNECT_HIDRAW);
if (ret)
return ret;
- ret = hid_hw_open(hdev);
- if (ret)
- goto fail_and_stop;
-
switch (hdev->product) {
case USB_PRODUCT_ID_AQUAERO:
/*
@@ -1577,10 +1573,8 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id)
* they present. The two other devices have the type of the second element in
* their respective collections set to 1, while the real device has it set to 0.
*/
- if (hdev->collection[1].type != 0) {
- ret = -ENODEV;
- goto fail_and_close;
- }
+ if (hdev->collection[1].type != 0)
+ return -ENODEV;
priv->kind = aquaero;
@@ -1740,10 +1734,8 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id)
* Choose the right Leakshield device, because
* the other one acts as a keyboard
*/
- if (hdev->type != 2) {
- ret = -ENODEV;
- goto fail_and_close;
- }
+ if (hdev->type != 2)
+ return -ENODEV;
priv->kind = leakshield;
@@ -1865,30 +1857,20 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id)
priv->name = aqc_device_names[priv->kind];
priv->buffer = devm_kzalloc(&hdev->dev, priv->buffer_size, GFP_KERNEL);
- if (!priv->buffer) {
- ret = -ENOMEM;
- goto fail_and_close;
- }
+ if (!priv->buffer)
+ return -ENOMEM;
mutex_init(&priv->mutex);
priv->hwmon_dev = hwmon_device_register_with_info(&hdev->dev, priv->name, priv,
&aqc_chip_info, NULL);
- if (IS_ERR(priv->hwmon_dev)) {
- ret = PTR_ERR(priv->hwmon_dev);
- goto fail_and_close;
- }
+ if (IS_ERR(priv->hwmon_dev))
+ return PTR_ERR(priv->hwmon_dev);
aqc_debugfs_init(priv);
return 0;
-
-fail_and_close:
- hid_hw_close(hdev);
-fail_and_stop:
- hid_hw_stop(hdev);
- return ret;
}
static void aqc_remove(struct hid_device *hdev)
@@ -1897,9 +1879,6 @@ static void aqc_remove(struct hid_device *hdev)
debugfs_remove_recursive(priv->debugfs);
hwmon_device_unregister(priv->hwmon_dev);
-
- hid_hw_close(hdev);
- hid_hw_stop(hdev);
}
static const struct hid_device_id aqc_table[] = {
Currently, the aquacomputer_d5next module needs to maintain hid resources by itself. Consider using devm_hid_hw_start_and_open helper to ensure that hid resources are consistent with the device life cycle, and release hid resources before device is released. At the same time, it can avoid the goto-release encoding, drop the fail_and_close and fail_and_stop lables, and directly return the error code when an error occurs. Signed-off-by: Li Zetao <lizetao1@huawei.com> --- drivers/hwmon/aquacomputer_d5next.c | 39 +++++++---------------------- 1 file changed, 9 insertions(+), 30 deletions(-)