From patchwork Wed Jul 31 12:56:08 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Peng Fan \(OSS\)" X-Patchwork-Id: 815805 Received: from DUZPR83CU001.outbound.protection.outlook.com (mail-northeuropeazon11013028.outbound.protection.outlook.com [52.101.67.28]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 779501B1409; Wed, 31 Jul 2024 12:47:39 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=fail smtp.client-ip=52.101.67.28 ARC-Seal: i=2; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1722430062; cv=fail; b=G73smblPZike1s1rluvdOqZRnDEkBrrDjXLEEt1HG+0a5NLAVm8uLnPrdrZRpjNDI2QrQsajETrSKtq6uAAtJyqfolBpPUqWU6Ha4LAD/yZoH0dPLpjlVEP4OXsJzD0903mWgPi4GGS4Hbk0Od+S2hqdWpwY6PMEARVNwn7demE= ARC-Message-Signature: i=2; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1722430062; c=relaxed/simple; bh=5R7x1rhj1TYPjKc6u9bHCeGcNZSKvIA3B92jHkks3vc=; h=From:Date:Subject:Content-Type:Message-Id:References:In-Reply-To: To:Cc:MIME-Version; b=goL8+GzQRVncXpV6fS5miTRY+PaFmYkrkObojPICGDVcgKvhNOBCM+LB6WGqci9Nc8z/NHzEfi/HySDQZ7OrpMtRMJr2an3kk3QahaSJoLjtiSY+15JoRRVgsGH1Y5NFbLDCB+jbhO+qyiRLeSG9Vjk5+mwNjtEE46eyBUP+Sno= ARC-Authentication-Results: i=2; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=oss.nxp.com; spf=pass smtp.mailfrom=oss.nxp.com; dkim=pass (2048-bit key) header.d=NXP1.onmicrosoft.com header.i=@NXP1.onmicrosoft.com header.b=kiTz3pUj; arc=fail smtp.client-ip=52.101.67.28 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=oss.nxp.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=oss.nxp.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=NXP1.onmicrosoft.com header.i=@NXP1.onmicrosoft.com header.b="kiTz3pUj" ARC-Seal: i=1; a=rsa-sha256; s=arcselector10001; d=microsoft.com; cv=none; b=wC56I8gEfEbsdR2ZGVHI6KQe0Zlt02dTn71S6TXUahzRSYN1X794GfAuP36ZICX3HhdU2yycvzRkrZniRkTpS80759upTid/6U3BC+tfTqG7xtTVO9e5/ucCFxUQo1WjJ7O12OPV9j7Wo0sE0io+BPqVj79qzjgxahQnEy3nXiZHrBaG9mTRwk8+5zhnR0UI+LhNTtBh4ZuDuQY7jNyKMpWxSoVX0L9Nn7odoUEfj0OxzEi90eNrB1WwKPAkrx1w8XZJYn3nXBgTcibzD9NURshkWBZZDgffrwE3jr2M8Drh9yapuefQYSLxYNDN+Nrx2IObI+RDDREur6pmHrRsbw== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector10001; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=VKqRmRGJCU2bjse9FkKJJPqPuq+AJgTGg1aQq7hRCcE=; b=vAul+An5FvcL/5Kkeu2Cdhk/HY7rf08WLReKoeHuyPprs7s7QBRz+OVzZRSwjD7oU/QeKU7ds2rNVMcu6c7sWpCu0gkGLB91+quVLaG5EX/nz9ARBEAQzDSvTiSd/MzB+Z3dDzyK9xOqz2ZeGdUj+dp9xKrTIiZheShTL0rYNNnmAlFD5FXeJhZ3XXbw4dQhWZJZW4rxp1FI2bd3d3K19dTBec3NAM3OrrSpTZx15jgMmzNmJaeQOll1z5u402IAOnzVWjKVsvMyh2Us4ck9kph0wD5gbb+RnlDprL35YLhsomcytS5iZXCgnst9U8WNJ1k3BrqzUq5gMuP2R3V+2g== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass smtp.mailfrom=oss.nxp.com; dmarc=pass action=none header.from=oss.nxp.com; dkim=pass header.d=oss.nxp.com; arc=none DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=NXP1.onmicrosoft.com; s=selector1-NXP1-onmicrosoft-com; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=VKqRmRGJCU2bjse9FkKJJPqPuq+AJgTGg1aQq7hRCcE=; b=kiTz3pUjhmvYLFQuqPhVnkAKYrep2tz+gL6qfp73E6/OYIJ2C0X97h7o+73bkhIt8acWFJGrcEkS75quemhX9s+AMedtC1sm/ng1ViFiCkOOHmxYrb5v7K48IbQxZT8g4xj/ksytShazF3iJguvPlG5Y8yQUsf22ed8dQyK/uucL/v10ar/cirxr/zLxWTVLwDHg/yO72ZMcnGkPOumANA+lNfqqkJ/uDbzFNAvE0fhQ6glBzDlbIZSTNalevD4kp1VVwL4sGFVweEpio+JAOEhTgOdF4Ks4KA6u1E8vple4ojohvVvkVh0Uq5MvyKDcLiYAmynW3259bFW77hwyQA== Authentication-Results: dkim=none (message not signed) header.d=none;dmarc=none action=none header.from=oss.nxp.com; Received: from PAXPR04MB8459.eurprd04.prod.outlook.com (2603:10a6:102:1da::15) by AS8PR04MB7735.eurprd04.prod.outlook.com (2603:10a6:20b:2a5::24) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.7828.19; Wed, 31 Jul 2024 12:47:34 +0000 Received: from PAXPR04MB8459.eurprd04.prod.outlook.com ([fe80::165a:30a2:5835:9630]) by PAXPR04MB8459.eurprd04.prod.outlook.com ([fe80::165a:30a2:5835:9630%4]) with mapi id 15.20.7784.020; Wed, 31 Jul 2024 12:47:34 +0000 From: "Peng Fan (OSS)" Date: Wed, 31 Jul 2024 20:56:08 +0800 Subject: [PATCH v7 4/7] firmware: arm_scmi: add NXP i.MX95 SCMI documentation Message-Id: <20240731-imx95-bbm-misc-v2-v7-4-a41394365602@nxp.com> References: <20240731-imx95-bbm-misc-v2-v7-0-a41394365602@nxp.com> In-Reply-To: <20240731-imx95-bbm-misc-v2-v7-0-a41394365602@nxp.com> To: Sudeep Holla , Cristian Marussi , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Shawn Guo , Sascha Hauer , Pengutronix Kernel Team , Fabio Estevam , Peng Fan , Alexandre Belloni , Dmitry Torokhov Cc: arm-scmi@vger.kernel.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, imx@lists.linux.dev, linux-rtc@vger.kernel.org, linux-input@vger.kernel.org X-Mailer: b4 0.14.1 X-Developer-Signature: v=1; a=ed25519-sha256; t=1722430577; l=55298; i=peng.fan@nxp.com; s=20230812; h=from:subject:message-id; bh=awGI47uCRhda8RgNOE4cyUBLlzqkWBO1IIkfhQqujqA=; b=kWvPL8nSpqwCwK7judF9pnJqadBCYy+rs0fZpkY2MtSjBXl05EoLLtfNSBR2k6TdiIUVtFG0F /twmRmTAbwWDFP47tX+7J/sNlVayM6/SaMapsA7yxKZu2Iq7ZZu6KGc X-Developer-Key: i=peng.fan@nxp.com; a=ed25519; pk=I4sJg7atIT1g63H7bb5lDRGR2gJW14RKDD0wFL8TT1g= X-ClientProxiedBy: SI2PR02CA0027.apcprd02.prod.outlook.com (2603:1096:4:195::14) To PAXPR04MB8459.eurprd04.prod.outlook.com (2603:10a6:102:1da::15) Precedence: bulk X-Mailing-List: linux-input@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-MS-Exchange-MessageSentRepresentingType: 1 X-MS-PublicTrafficType: Email X-MS-TrafficTypeDiagnostic: PAXPR04MB8459:EE_|AS8PR04MB7735:EE_ X-MS-Office365-Filtering-Correlation-Id: 3a62a903-5cc2-4d8c-899f-08dcb15ef31d X-MS-Exchange-SharedMailbox-RoutingAgent-Processed: True X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0; ARA:13230040|366016|52116014|7416014|376014|1800799024|38350700014|921020; X-Microsoft-Antispam-Message-Info: =?utf-8?q?dGISP83vbwfqHUXiDfqknlPSXs5EV04?= =?utf-8?q?0nX/YVYlVBcNZdjJ/i1/1MNT7y8thpuVWQiqxtF5xBJY0BqJXpip8xqyVfkcW9+Zd?= =?utf-8?q?pXMBhbEOB9ghQfVmc0lQouGnJgDLTSxMeVn6uEHK7tjBafCkQWNiX6uU2qA5PJJUY?= =?utf-8?q?lcA6izMowVNqP6fWTdrt8xNY/laZ8hDtrAw7f00bmaKK8TDJmekaalSK9o0R00lrK?= =?utf-8?q?9KjO9SeXn6qV4rAGiKW1GwY0JlizOH7EcoCrKSA/t6DxFBeHxPfQ6yhRue+ODKlXy?= =?utf-8?q?DnCD4tzAknq7dQZuA632lLH9249WRyEbTlUu2AUhKnl1fPXelw1jMj5gSF+z1Ng3Z?= =?utf-8?q?c6Z/FBwFqVWk0gQ5Hlg3/mcWLJUMRl3DEcG7V4IDxPQZIh9eKWWkt2KwRXpT7R67z?= =?utf-8?q?W3p4x2EMILIzJ2woyyMJB0TmSCpcJYEXejH0INu/r7sxW2jIyn7PZCsejXqEm0FYf?= =?utf-8?q?y6GdUe9rXcAqhOiisSMhP2QZqntx1VPA9/XLnU7928Vl3wcMBUPQncj6rdNDy7x8r?= =?utf-8?q?uTBecMBvKt9owIb88bGTQ6RDsMdU1CnDLGLBJ6RuopSaf2WoH+3qkefmba4MhFbyF?= =?utf-8?q?O3axQSIWtAHBOQdIwAOcy/eUvqu4sLYRlpnQOJuX0T4PnzkLpL9VNIZyu/5IjXW7A?= =?utf-8?q?kydEJLUnxrXzPe+KuYfqBK3NJCZEvHpS7OKyAImzFl8B0XduiH26UqassNnJZYxd+?= =?utf-8?q?nZD2t1CzCGtujdAJOvXcT6xjWD17oD/iqE2hp1Hl8DshbT6y6lwL1na20Nq4dV0ua?= =?utf-8?q?/Rrfx4pu1dadajGAOmmU4YUwaHqbd53f1Qn4fHuas1hP3l/0m/7q35Gn/YtPbT3y9?= =?utf-8?q?nnMZXePrKLy74n9WO8OUjjcOS8QdsINwl0kro3y7Nsg5wVPZlgRTlNc78GKxnkQlc?= =?utf-8?q?EGBaXgNWh+HjpLgF9oCFcZFCMDzM1BudsSi/L0skb/uL/2glT4wq6xOA1/yPjwuN/?= =?utf-8?q?Ks52EBiy0ZlrvuwPb75eZVN1gitxJeSd9uT99Embye+28M8MwpT60bndgIDrGiD9n?= =?utf-8?q?Xf1Lg/ak/Qi0FXTF5wrmNlOm9DL0CqDtvRoNFUZPP+mVQvi6RcFIdkbXilWxvfnL9?= =?utf-8?q?HaEOqPoCfjZtjYwigZ520ojRIl2MDKEHlr0BFBam3mCFzCk8jetVKei4vYefJMiAp?= =?utf-8?q?Bb1/ZRc7PIC6Ksc99/FMSJTUHN11CJrtzrwSo/bdBFBaaJI98Wfhiv50q/dlF4op4?= =?utf-8?q?wsBym/sPXV0t7kgcnNTLlKRzRPvrlkJnsf6Lcsg1+nvAgKL3qQ3pHU2tQ1t0J8VOZ?= =?utf-8?q?9qER/RLf0Y+yOTX/8Tq8byrfXTN8la5e9E07HpXNacbgIyYvHhURZSKRPfzH09Mxf?= =?utf-8?q?XwK8F7ptghfkElC62wVBoiHaqK8X/5Z1Sf5IPs3NORGfAMnYIyp2WOI=3D?= X-Forefront-Antispam-Report: CIP:255.255.255.255; CTRY:; LANG:en; SCL:1; SRV:; IPV:NLI; SFV:NSPM; H:PAXPR04MB8459.eurprd04.prod.outlook.com; PTR:; CAT:NONE; SFS:(13230040)(366016)(52116014)(7416014)(376014)(1800799024)(38350700014)(921020); DIR:OUT; SFP:1101; X-MS-Exchange-AntiSpam-MessageData-ChunkCount: 1 X-MS-Exchange-AntiSpam-MessageData-0: =?utf-8?q?uT0Nvlnn019N5nNYOw8/oyPfNRPg?= =?utf-8?q?uWOawsV+uVtK7PTL+0PbgSkryIbKqyfzov6DmQH7RaPoa7Fyn6En0U5Y3WJA7qTl8?= =?utf-8?q?BWcPozN+Nfwf8+eNnQubLYm4dbKVNbdHa6xYTWsMYxoRxE5y4dbhMXcef36eyEPED?= =?utf-8?q?6NIgoyrR/ZCxp3NoO63LJNmLehP6aWOOXnTQxjbjoRD9BNQZ/JaFe6k3BIFXRBnXj?= =?utf-8?q?UQ5HBBKrnIE8YGjgzmAMNuBSN/u5MIGUFLV3ytXztXK4wPcYEliydByisY7LxJtpQ?= =?utf-8?q?8MDGWbIN8Wfnl2if7a8x54wLmFV58AmrKBf6moQUzxro561E0jml44DZvlRRksEtk?= =?utf-8?q?PFAszzmKe0x8pPG0mSN8TO+eS2luTz5TaEsAYtQKEG9AK9eNeq+FA02cPiVrpOS8i?= =?utf-8?q?t++/pSG9SLetj1ECN3WJIftrcshqOG1cmoD8WYD2IoltCi7h4Ro15IVS9UZuufrMy?= =?utf-8?q?mgcEYJM/g2S86tFkVUu6LJNES+oOMmTpptNuBa4pYN8ayLDn1pKFoLTt7Sv+toML7?= =?utf-8?q?Bm5/i1dOoBkN1FtW1N88Z4NglbdV8sPhy7dquIjze/kuAncm6Wiukb0x3qZrR+bEK?= =?utf-8?q?It+ueN4TPleo3GF12BF2Y0rOpw73eLKIeZgYxP5oP5EpxmAyeyvelp52+xzomGd7P?= =?utf-8?q?AQGf68ONd8tU6CZVgOE3RG0G6KiEyIosaX6+Ih12JtrX6mh2ftxcYM+IBgxbiH7tV?= =?utf-8?q?Ez7tlk+lLNiFYAcx9D7OQDXS0t047/pLa39vArwqaOYso6FH+K2DBzGMDCZZmXvPD?= =?utf-8?q?ojvAoxuIQEPA5uqXc3XCEXSn+FlIKxKVsFd7u71FeXTWKnwAdfX1hepsl723z+LmZ?= =?utf-8?q?lbmr12SpRtOoN4PAYqDtv53gLiicMD77JvPTmEszqmXTyIimBCrtRNr2qEXBcAeDO?= =?utf-8?q?bzUDkaucaDejNU2Xwg47DSLJrEwRw30u4iWtoSyApkws/kIBZb6SvLkD8NT9WaUz9?= =?utf-8?q?rRUPwoSB0sYBYG2i3w6juWJ6ESJs6V5oP5LpQYc2TpIxUSUjoTfgKw5PxriSzsoQ7?= =?utf-8?q?aCra1n0sOWmjw1vjL5kAZgEKZHwDQreOKHrpsntp7iI9GXkaImF6a03cM+SmVVXcO?= =?utf-8?q?F/nYPJrwj8WHnzVJ9yKOprOOgKB8b4RoMeQCGuyKzqtPODQdP0mfsdvkDjlTid8yC?= =?utf-8?q?FC9GyeC93NQFv8VgPwxetGTNLpt57P6V2uM0piDA6blX0XbKP1FBM6d4t9O6S9xJJ?= =?utf-8?q?Fg0U+gNvcRFoBu5lNaP44xWW5apSLiuM6zDdhFdV+0tEjWEKeOsIHHNFAtaEcYkFC?= =?utf-8?q?FcZjZWs5jdWy0q79hrmBZ3fJOBRGTVZJBOMzkR3NwhSvsJYQknCWVBrdxcvRkqEC/?= =?utf-8?q?YzqrfVlpEryBIcojOI+FXzIafD0E7VzhD/WL8H2qGQXCSS8g/JRGVBVzmNbZ9WF5Q?= =?utf-8?q?VDYcQdNdFwS/3pcXPVz8zasCy25jxYzgTpCBUcN0ItmRWirEYPzD0Maoq7EfH37xs?= =?utf-8?q?JmNlw7wJnLM/2+imifNO2jfWPiVNRI96/WKs3aBfIkeapfudD65aV37n4CFgepZ5X?= =?utf-8?q?XhR2QoNKniPW?= X-OriginatorOrg: oss.nxp.com X-MS-Exchange-CrossTenant-Network-Message-Id: 3a62a903-5cc2-4d8c-899f-08dcb15ef31d X-MS-Exchange-CrossTenant-AuthSource: PAXPR04MB8459.eurprd04.prod.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Internal X-MS-Exchange-CrossTenant-OriginalArrivalTime: 31 Jul 2024 12:47:34.5630 (UTC) X-MS-Exchange-CrossTenant-FromEntityHeader: Hosted X-MS-Exchange-CrossTenant-Id: 686ea1d3-bc2b-4c6f-a92c-d99c5c301635 X-MS-Exchange-CrossTenant-MailboxType: HOSTED X-MS-Exchange-CrossTenant-UserPrincipalName: H/jdPWkhgRZ4tdj8dJ3kBWjbbWhvymIdAYpwaMdZKaGKZbRKMawy5R7i1x5GxDY/0iJ9VA5HwYMOVfaNBD6YGw== X-MS-Exchange-Transport-CrossTenantHeadersStamped: AS8PR04MB7735 From: Peng Fan Add NXP i.MX95 System Control Management Interface(SCMI) vendor extensions protocol documentation. Reviewed-by: Cristian Marussi Signed-off-by: Peng Fan --- drivers/firmware/arm_scmi/imx/imx95.rst | 886 ++++++++++++++++++++++++++++++++ 1 file changed, 886 insertions(+) diff --git a/drivers/firmware/arm_scmi/imx/imx95.rst b/drivers/firmware/arm_scmi/imx/imx95.rst new file mode 100644 index 000000000000..6a9e53c17df1 --- /dev/null +++ b/drivers/firmware/arm_scmi/imx/imx95.rst @@ -0,0 +1,886 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: + +=============================================================================== +i.MX95 System Control and Management Interface(SCMI) Vendor Protocols Extension +=============================================================================== + +:Copyright: |copy| 2024 NXP + +:Author: Peng Fan + +The System Manager (SM) is a low-level system function which runs on a System +Control Processor (SCP) to support isolation and management of power domains, +clocks, resets, sensors, pins, etc. on complex application processors. It often +runs on a Cortex-M processor and provides an abstraction to many of the +underlying features of the hardware. The primary purpose of the SM is to allow +isolation between software running on different cores in the SoC. It does this +by having exclusive access to critical resources such as those controlling +power, clocks, reset, PMIC, etc. and then providing an RPC interface to those +clients. This allows the SM to provide access control, arbitration, and +aggregation policies for those shared critical resources. + +SM introduces a concept Logic Machine(LM) which is analogous to VM and each has +its own instance of SCMI. All normal SCMI calls only apply to that LM. That +includes boot, shutdown, reset, suspend, wake, etc. Each LM (e.g. A55 and M7) +are completely isolated from the others and each LM has its own communication +channels talking to the same SCMI server. + +This document covers all the information necessary to understand, maintain, +port, and deploy the SM on supported processors. + +The SM implements an interface compliant with the Arm SCMI Specification +with additional vendor specific extensions. + +SCMI_BBM: System Control and Management BBM Vendor Protocol +============================================================== + +This protocol is intended provide access to the battery-backed module. This +contains persistent storage (GPR), an RTC, and the ON/OFF button. The protocol +can also provide access to similar functions implemented via external board +components. The BBM protocol provides functions to: + +- Describe the protocol version. +- Discover implementation attributes. +- Read/write GPR +- Discover the RTCs available in the system. +- Read/write the RTC time in seconds and ticks +- Set an alarm (per LM) in seconds +- Get notifications on RTC update, alarm, or rollover. +- Get notification on ON/OFF button activity. + +For most SoC, there is one on-chip RTC (e.g. in BBNSM) and this is RTC ID 0. +Board code can add additional GPR and RTC. + +GPR are not aggregated. The RTC time is also not aggregated. Setting these +sets for all so normally exclusive access would be granted to one agent for +each. However, RTC alarms are maintained for each LM and the hardware is +programmed with the next nearest alarm time. So only one agent in an LM should +be given access rights to set an RTC alarm. + +Commands: +_________ + +PROTOCOL_VERSION +~~~~~~~~~~~~~~~~ + +message_id: 0x0 +protocol_id: 0x81 + ++---------------+--------------------------------------------------------------+ +|Return values | ++---------------+--------------------------------------------------------------+ +|Name |Description | ++---------------+--------------------------------------------------------------+ +|int32 status | See ARM SCMI Specification for status code definitions. | ++---------------+--------------------------------------------------------------+ +|uint32 version | For this revision of the specification, this value must be | +| | 0x10000. | ++---------------+--------------------------------------------------------------+ + +PROTOCOL_ATTRIBUTES +~~~~~~~~~~~~~~~~~~~ + +message_id: 0x1 +protocol_id: 0x81 + ++---------------+--------------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status | See ARM SCMI Specification for status code definitions. | ++------------------+-----------------------------------------------------------+ +|uint32 attributes | Bits[31:8] Number of RTCs. | +| | Bits[15:0] Number of persistent storage (GPR) words. | ++------------------+-----------------------------------------------------------+ + +PROTOCOL_MESSAGE_ATTRIBUTES +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +message_id: 0x2 +protocol_id: 0x81 + ++---------------+--------------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: in case the message is implemented and available | +| |to use. | +| |NOT_FOUND: if the message identified by message_id is | +| |invalid or not implemented | ++------------------+-----------------------------------------------------------+ +|uint32 attributes |Flags that are associated with a specific function in the | +| |protocol. For all functions in this protocol, this | +| |parameter has a value of 0 | ++------------------+-----------------------------------------------------------+ + +BBM_GPR_SET +~~~~~~~~~~~ + +message_id: 0x3 +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 index |Index of GPR to write | ++------------------+-----------------------------------------------------------+ +|uint32 value |32-bit value to write to the GPR | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: if the GPR was successfully written. | +| |NOT_FOUND: if the index is not valid. | +| |DENIED: if the agent does not have permission to write | +| |the specified GPR | ++------------------+-----------------------------------------------------------+ + +BBM_GPR_GET +~~~~~~~~~~~ + +message_id: 0x4 +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 index |Index of GPR to read | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: if the GPR was successfully read. | +| |NOT_FOUND: if the index is not valid. | +| |DENIED: if the agent does not have permission to read | +| |the specified GPR. | ++------------------+-----------------------------------------------------------+ +|uint32 value |32-bit value read from the GPR | ++------------------+-----------------------------------------------------------+ + +BBM_RTC_ATTRIBUTES +~~~~~~~~~~~~~~~~~~ + +message_id: 0x5 +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 index |Index of RTC | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: returned the attributes. | +| |NOT_FOUND: Index is invalid. | ++------------------+-----------------------------------------------------------+ +|uint32 attributes |Bit[31:24] Bit width of RTC seconds. | +| |Bit[23:16] Bit width of RTC ticks. | +| |Bits[15:0] RTC ticks per second | ++------------------+-----------------------------------------------------------+ +|uint8 name[16] |Null-terminated ASCII string of up to 16 bytes in length | +| |describing the RTC name | ++------------------+-----------------------------------------------------------+ + +BBM_RTC_TIME_SET +~~~~~~~~~~~~~~~~ + +message_id: 0x6 +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 index |Index of RTC | ++------------------+-----------------------------------------------------------+ +|uint32 flags |Bits[31:1] Reserved, must be zero. | +| |Bit[0] RTC time format: | +| |Set to 1 if the time is in ticks. | +| |Set to 0 if the time is in seconds | ++------------------+-----------------------------------------------------------+ +|uint32 time[2] |Lower word: Lower 32 bits of the time in seconds/ticks. | +| |Upper word: Upper 32 bits of the time in seconds/ticks. | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: RTC time was successfully set. | +| |NOT_FOUND: rtcId pertains to a non-existent RTC. | +| |INVALID_PARAMETERS: time is not valid | +| |(beyond the range of the RTC). | +| |DENIED: the agent does not have permission to set the RTC. | ++------------------+-----------------------------------------------------------+ + +BBM_RTC_TIME_GET +~~~~~~~~~~~~~~~~ + +message_id: 0x7 +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 index |Index of RTC | ++------------------+-----------------------------------------------------------+ +|uint32 flags |Bits[31:1] Reserved, must be zero. | +| |Bit[0] RTC time format: | +| |Set to 1 if the time is in ticks. | +| |Set to 0 if the time is in seconds | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: RTC time was successfully get. | +| |NOT_FOUND: rtcId pertains to a non-existent RTC. | ++------------------+-----------------------------------------------------------+ +|uint32 time[2] |Lower word: Lower 32 bits of the time in seconds/ticks. | +| |Upper word: Upper 32 bits of the time in seconds/ticks. | ++------------------+-----------------------------------------------------------+ + +BBM_RTC_ALARM_SET +~~~~~~~~~~~~~~~~~ + +message_id: 0x8 +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 index |Index of RTC | ++------------------+-----------------------------------------------------------+ +|uint32 flags |Bits[31:1] Reserved, must be zero. | +| |Bit[0] RTC enable flag: | +| |Set to 1 if the RTC alarm should be enabled. | +| |Set to 0 if the RTC alarm should be disabled | ++------------------+-----------------------------------------------------------+ +|uint32 time[2] |Lower word: Lower 32 bits of the time in seconds. | +| |Upper word: Upper 32 bits of the time in seconds. | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: RTC time was successfully set. | +| |NOT_FOUND: rtcId pertains to a non-existent RTC. | +| |INVALID_PARAMETERS: time is not valid | +| |(beyond the range of the RTC). | +| |DENIED: the agent does not have permission to set the RTC | +| |alarm | ++------------------+-----------------------------------------------------------+ + +BBM_BUTTON_GET +~~~~~~~~~~~~~~ + +message_id: 0x9 +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: if the button status was read. | +| |Other value: ARM SCMI Specification status code definitions| ++------------------+-----------------------------------------------------------+ +|uint32 state |State of the ON/OFF button. 1: ON, 0: OFF | ++------------------+-----------------------------------------------------------+ + +BBM_RTC_NOTIFY +~~~~~~~~~~~~~~ + +message_id: 0xA +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 index |Index of RTC | ++------------------+-----------------------------------------------------------+ +|uint32 flags |Notification flags | +| |Bits[31:3] Reserved, must be zero. | +| |Bit[2] Update enable: | +| |Set to 1 to send notification. | +| |Set to 0 if no notification. | +| |Bit[1] Rollover enable: | +| |Set to 1 to send notification. | +| |Set to 0 if no notification. | +| |Bit[0] Alarm enable: | +| |Set to 1 to send notification. | +| |Set to 0 if no notification | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: notification configuration was successfully | +| |updated. | +| |NOT_FOUND: rtcId pertains to a non-existent RTC. | +| |DENIED: the agent does not have permission to request RTC | +| |notifications. | ++------------------+-----------------------------------------------------------+ + +BBM_BUTTON_NOTIFY +~~~~~~~~~~~~~~~~~ + +message_id: 0xB +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 flags |Notification flags | +| |Bits[31:1] Reserved, must be zero. | +| |Bit[0] Enable button: | +| |Set to 1 to send notification. | +| |Set to 0 if no notification | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: notification configuration was successfully | +| |updated. | +| |DENIED: the agent does not have permission to request | +| |button notifications. | ++------------------+-----------------------------------------------------------+ + +NEGOTIATE_PROTOCOL_VERSION +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +message_id: 0x10 +protocol_id: 0x81 + ++--------------------+---------------------------------------------------------+ +|Parameters | ++--------------------+---------------------------------------------------------+ +|Name |Description | ++--------------------+---------------------------------------------------------+ +|uint32 version |The negotiated protocol version the agent intends to use | ++--------------------+---------------------------------------------------------+ +|Return values | ++--------------------+---------------------------------------------------------+ +|Name |Description | ++--------------------+---------------------------------------------------------+ +|int32 status |SUCCESS: if the negotiated protocol version is supported | +| |by the platform. All commands, responses, and | +| |notifications post successful return of this command must| +| |comply with the negotiated version. | +| |NOT_SUPPORTED: if the protocol version is not supported. | ++--------------------+---------------------------------------------------------+ + +Notifications +_____________ + +BBM_RTC_EVENT +~~~~~~~~~~~~~ + +message_id: 0x0 +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 flags |RTC events: | +| |Bits[31:2] Reserved, must be zero. | +| |Bit[1] RTC rollover notification: | +| |1 RTC rollover detected. | +| |0 no RTC rollover detected. | +| |Bit[0] RTC alarm notification: | +| |1 RTC alarm generated. | +| |0 no RTC alarm generated. | ++------------------+-----------------------------------------------------------+ + +BBM_BUTTON_EVENT +~~~~~~~~~~~~~~~~ + +message_id: 0x1 +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 flags |RTC events: | ++------------------+-----------------------------------------------------------+ +| |Button events: | +| |Bits[31:1] Reserved, must be zero. | +| |Bit[0] Button notification: | +| |1 button change detected. | +| |0 no button change detected. | ++------------------+-----------------------------------------------------------+ + +SCMI_MISC: System Control and Management MISC Vendor Protocol +================================================================ + +Provides miscellaneous functions. This includes controls that are miscellaneous +settings/actions that must be exposed from the SM to agents. They are device +specific and are usually define to access bit fields in various mix block +control modules, IOMUX_GPR, and other GPR/CSR owned by the SM. This protocol +supports the following functions: + +- Describe the protocol version. +- Discover implementation attributes. +- Set/Get a control. +- Initiate an action on a control. +- Obtain platform (i.e. SM) build information. +- Obtain ROM passover data. +- Read boot/shutdown/reset information for the LM or the system. + +Commands: +_________ + +PROTOCOL_VERSION +~~~~~~~~~~~~~~~~ + +message_id: 0x0 +protocol_id: 0x84 + ++---------------+--------------------------------------------------------------+ +|Return values | ++---------------+--------------------------------------------------------------+ +|Name |Description | ++---------------+--------------------------------------------------------------+ +|int32 status | See ARM SCMI Specification for status code definitions. | ++---------------+--------------------------------------------------------------+ +|uint32 version | For this revision of the specification, this value must be | +| | 0x10000. | ++---------------+--------------------------------------------------------------+ + +PROTOCOL_ATTRIBUTES +~~~~~~~~~~~~~~~~~~~ + +message_id: 0x1 +protocol_id: 0x84 + ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status | See ARM SCMI Specification for status code definitions. | ++------------------+-----------------------------------------------------------+ +|uint32 attributes |Protocol attributes: | +| |Bits[31:24] Reserved, must be zero. | +| |Bits[23:16] Number of reset reasons. | +| |Bits[15:0] Number of controls | ++------------------+-----------------------------------------------------------+ + +PROTOCOL_MESSAGE_ATTRIBUTES +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +message_id: 0x2 +protocol_id: 0x84 + ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: in case the message is implemented and available | +| |to use. | +| |NOT_FOUND: if the message identified by message_id is | +| |invalid or not implemented | ++------------------+-----------------------------------------------------------+ +|uint32 attributes |Flags that are associated with a specific function in the | +| |protocol. For all functions in this protocol, this | +| |parameter has a value of 0 | ++------------------+-----------------------------------------------------------+ + +MISC_CONTROL_SET +~~~~~~~~~~~~~~~~ + +message_id: 0x3 +protocol_id: 0x84 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 index |Index of the control | ++------------------+-----------------------------------------------------------+ +|uint32 num |Size of the value data in words | ++------------------+-----------------------------------------------------------+ +|uint32 val[8] |value data array | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: if the control was set successfully. | +| |NOT_FOUND: if the index is not valid. | +| |DENIED: if the agent does not have permission to set the | +| |control | ++------------------+-----------------------------------------------------------+ + +MISC_CONTROL_GET +~~~~~~~~~~~~~~~~ + +message_id: 0x4 +protocol_id: 0x84 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 index |Index of the control | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: if the control was get successfully. | +| |NOT_FOUND: if the index is not valid. | +| |DENIED: if the agent does not have permission to get the | +| |control | ++------------------+-----------------------------------------------------------+ +|uint32 num |Size of the return data in words, max 8 | ++------------------+-----------------------------------------------------------+ +|uint32 | | +|val[0, num - 1] |value data array | ++------------------+-----------------------------------------------------------+ + +MISC_CONTROL_ACTION +~~~~~~~~~~~~~~~~~~~ + +message_id: 0x5 +protocol_id: 0x84 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 index |Index of the control | ++------------------+-----------------------------------------------------------+ +|uint32 action |Action for the control | ++------------------+-----------------------------------------------------------+ +|uint32 numarg |Size of the argument data, max 8 | ++------------------+-----------------------------------------------------------+ +|uint32 | | +|arg[0, numarg -1] |Argument data array | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: if the action was set successfully. | +| |NOT_FOUND: if the index is not valid. | +| |DENIED: if the agent does not have permission to get the | +| |control | ++------------------+-----------------------------------------------------------+ +|uint32 num |Size of the return data in words, max 8 | ++------------------+-----------------------------------------------------------+ +|uint32 | | +|val[0, num - 1] |value data array | ++------------------+-----------------------------------------------------------+ + +MISC_DISCOVER_BUILD_INFO +~~~~~~~~~~~~~~~~~~~~~~~~ + +This function is used to obtain the build commit, data, time, number. + +message_id: 0x6 +protocol_id: 0x84 + ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: if the build info was got successfully. | +| |NOT_SUPPORTED: if the data is not available. | ++------------------+-----------------------------------------------------------+ +|uint32 buildnum |Build number | ++------------------+-----------------------------------------------------------+ +|uint32 buildcommit|Most significant 32 bits of the git commit hash | ++------------------+-----------------------------------------------------------+ +|uint8 date[16] |Date of build. Null terminated ASCII string of up to 16 | +| |bytes in length | ++------------------+-----------------------------------------------------------+ +|uint8 time[16] |Time of build. Null terminated ASCII string of up to 16 | +| |bytes in length | ++------------------+-----------------------------------------------------------+ + +MISC_ROM_PASSOVER_GET +~~~~~~~~~~~~~~~~~~~~~ + +ROM passover data is information exported by ROM and could be used by others. +It includes boot device, instance, type, mode and etc. This function is used +to obtain the ROM passover data. The returned block of words is structured as +defined in the ROM passover section in the SoC RM. + +message_id: 0x7 +protocol_id: 0x84 + ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: if the data was got successfully. | +| |NOT_SUPPORTED: if the data is not available. | ++------------------+-----------------------------------------------------------+ +|uint32 num |Size of the passover data in words, max 13 | ++------------------+-----------------------------------------------------------+ +|uint32_t | | +|data[0, num - 1] |Passover data array | ++------------------+-----------------------------------------------------------+ + +MISC_CONTROL_NOTIFY +~~~~~~~~~~~~~~~~~~~ + +message_id: 0x8 +protocol_id: 0x84 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 index |Index of control | ++------------------+-----------------------------------------------------------+ +|uint32 flags |Notification flags, varies by control | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: notification configuration was successfully | +| |updated. | +| |NOT_FOUND: control id not exists. | +| |INVALID_PARAMETERS: if the input attributes flag specifies | +| |unsupported or invalid configurations.. | +| |DENIED: if the calling agent is not permitted to request | +| |the notification. | ++------------------+-----------------------------------------------------------+ + +MISC_RESET_REASON_ATTRIBUTES +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +message_id: 0x9 +protocol_id: 0x84 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 reasonid |Identifier for the reason | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: if valid reason attributes are returned | +| |NOT_FOUND: if reasonId pertains to a non-existent reason. | ++------------------+-----------------------------------------------------------+ +|uint32 attributes |Reason attributes. This parameter has the following | +| |format: Bits[31:0] Reserved, must be zero | +| |Bits[15:0] Number of persistent storage (GPR) words. | ++------------------+-----------------------------------------------------------+ +|uint8 name[16] |Null-terminated ASCII string of up to 16 bytes in length | +| |describing the reason | ++------------------+-----------------------------------------------------------+ + +MISC_RESET_REASON_GET +~~~~~~~~~~~~~~~~~~~~~ + +message_id: 0xA +protocol_id: 0x84 + ++--------------------+---------------------------------------------------------+ +|Parameters | ++--------------------+---------------------------------------------------------+ +|Name |Description | ++--------------------+---------------------------------------------------------+ +|uint32 flags |Reason flags. This parameter has the following format: | +| |Bits[31:1] Reserved, must be zero. | +| |Bit[0] System: | +| |Set to 1 to return the system reason. | +| |Set to 0 to return the LM reason | ++--------------------+---------------------------------------------------------+ +|Return values | ++--------------------+---------------------------------------------------------+ +|Name |Description | ++--------------------+---------------------------------------------------------+ +|int32 status |SUCCESS: reset reason return | ++--------------------+---------------------------------------------------------+ +|uint32 bootflags |Boot reason flags. This parameter has the format: | +| |Bits[31] Valid. | +| |Set to 1 if the entire reason is valid. | +| |Set to 0 if the entire reason is not valid. | +| |Bits[30:29] Reserved, must be zero. | +| |Bit[28] Valid origin: | +| |Set to 1 if the origin field is valid. | +| |Set to 0 if the origin field is not valid. | +| |Bits[27:24] Origin. | +| |Bit[23] Valid err ID: | +| |Set to 1 if the error ID field is valid. | +| |Set to 0 if the error ID field is not valid. | +| |Bits[22:8] Error ID. | +| |Bit[7:0] Reason | ++--------------------+---------------------------------------------------------+ +|uint32 shutdownflags|Shutdown reason flags. This parameter has the format: | +| |Bits[31] Valid. | +| |Set to 1 if the entire reason is valid. | +| |Set to 0 if the entire reason is not valid. | +| |Bits[30:29] Number of valid extended info words. | +| |Bit[28] Valid origin: | +| |Set to 1 if the origin field is valid. | +| |Set to 0 if the origin field is not valid. | +| |Bits[27:24] Origin. | +| |Bit[23] Valid err ID: | +| |Set to 1 if the error ID field is valid. | +| |Set to 0 if the error ID field is not valid. | +| |Bits[22:8] Error ID. | +| |Bit[7:0] Reason | ++--------------------+---------------------------------------------------------+ +|uint32 extinfo[8] |Array of extended info words | ++--------------------+---------------------------------------------------------+ + +MISC_SI_INFO_GET +~~~~~~~~~~~~~~~~ + +message_id: 0xB +protocol_id: 0x84 + ++--------------------+---------------------------------------------------------+ +|Return values | ++--------------------+---------------------------------------------------------+ +|Name |Description | ++--------------------+---------------------------------------------------------+ +|int32 status |SUCCESS: silicon info return | ++--------------------+---------------------------------------------------------+ +|uint32 deviceid |Silicon specific device ID | ++--------------------+---------------------------------------------------------+ +|uint32 sirev |Silicon specific revision | ++--------------------+---------------------------------------------------------+ +|uint32 partnum |Silicon specific part number | ++--------------------+---------------------------------------------------------+ +|uint8 siname[16] |Silicon name/revision. Null terminated ASCII string of up| +| |to 16 bytes in length | ++--------------------+---------------------------------------------------------+ + +MISC_CFG_INFO_GET +~~~~~~~~~~~~~~~~~ + +message_id: 0xC +protocol_id: 0x84 + ++--------------------+---------------------------------------------------------+ +|Return values | ++--------------------+---------------------------------------------------------+ +|Name |Description | ++--------------------+---------------------------------------------------------+ +|int32 status |SUCCESS: config name return | +| |NOT_SUPPORTED: name not available | ++--------------------+---------------------------------------------------------+ +|uint32 msel |Mode selector value | ++--------------------+---------------------------------------------------------+ +|uint8 cfgname[16] |config file basename. Null terminated ASCII string of up | +| |to 16 bytes in length | ++--------------------+---------------------------------------------------------+ + +MISC_SYSLOG_GET +~~~~~~~~~~~~~~~ + +message_id: 0xD +protocol_id: 0x84 + ++--------------------+---------------------------------------------------------+ +|Parameters | ++--------------------+---------------------------------------------------------+ +|Name |Description | ++--------------------+---------------------------------------------------------+ +|uint32 flags |Device specific flags that might impact the data returned| +| |or clearing of the data | ++--------------------+---------------------------------------------------------+ +|uint32 logindex |Index to the first log word. Will be the first element in| +| |the return array | ++--------------------+---------------------------------------------------------+ +|Return values | ++--------------------+---------------------------------------------------------+ +|Name |Description | ++--------------------+---------------------------------------------------------+ +|int32 status |SUCCESS: system log return | ++--------------------+---------------------------------------------------------+ +|uint32 numLogflags |Descriptor for the log data returned by this call. | +| |Bits[31:20] Number of remaining log words. | +| |Bits[15:12] Reserved, must be zero. | +| |Bits[11:0] Number of log words that are returned by this | +| |call | ++--------------------+---------------------------------------------------------+ +|uint32 syslog[N] |Log data array, N is defined in bits[11:0] of numLogflags| ++--------------------+---------------------------------------------------------+ + +NEGOTIATE_PROTOCOL_VERSION +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +message_id: 0x10 +protocol_id: 0x84 + ++--------------------+---------------------------------------------------------+ +|Parameters | ++--------------------+---------------------------------------------------------+ +|Name |Description | ++--------------------+---------------------------------------------------------+ +|uint32 version |The negotiated protocol version the agent intends to use | ++--------------------+---------------------------------------------------------+ +|Return values | ++--------------------+---------------------------------------------------------+ +|Name |Description | ++--------------------+---------------------------------------------------------+ +|int32 status |SUCCESS: if the negotiated protocol version is supported | +| |by the platform. All commands, responses, and | +| |notifications post successful return of this command must| +| |comply with the negotiated version. | +| |NOT_SUPPORTED: if the protocol version is not supported. | ++--------------------+---------------------------------------------------------+ + +Notifications +_____________ + +MISC_CONTROL_EVENT +~~~~~~~~~~~~~~~~~~ + +message_id: 0x0 +protocol_id: 0x81 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 ctrlid |Identifier for the control that caused the event. | ++------------------+-----------------------------------------------------------+ +|uint32 flags |Event flags, varies by control. | ++------------------+-----------------------------------------------------------+