@@ -4940,6 +4940,8 @@ M: Ben Bright <ben.bright@cirrus.com>
L: patches@opensource.cirrus.com
S: Supported
F: Documentation/devicetree/bindings/input/cirrus,cs40l50.yaml
+F: drivers/mfd/cs40l*
+F: include/linux/mfd/cs40l*
CIRRUS LOGIC DSP FIRMWARE DRIVER
M: Simon Trimmer <simont@opensource.cirrus.com>
@@ -2241,6 +2241,36 @@ config MCP_UCB1200_TS
endmenu
+config MFD_CS40L50_CORE
+ tristate
+ select MFD_CORE
+ select FW_CS_DSP
+ select REGMAP_IRQ
+
+config MFD_CS40L50_I2C
+ tristate "Cirrus Logic CS40L50 (I2C)"
+ select REGMAP_I2C
+ select MFD_CS40L50_CORE
+ depends on I2C
+ help
+ Select this to support the Cirrus Logic CS40L50 Haptic
+ Driver over I2C.
+
+ This driver can be built as a module. If built as a module it will be
+ called "cs40l50-i2c".
+
+config MFD_CS40L50_SPI
+ tristate "Cirrus Logic CS40L50 (SPI)"
+ select REGMAP_SPI
+ select MFD_CS40L50_CORE
+ depends on SPI
+ help
+ Select this to support the Cirrus Logic CS40L50 Haptic
+ Driver over SPI.
+
+ This driver can be built as a module. If built as a module it will be
+ called "cs40l50-spi".
+
config MFD_VEXPRESS_SYSREG
tristate "Versatile Express System Registers"
depends on VEXPRESS_CONFIG && GPIOLIB
@@ -88,6 +88,10 @@ obj-$(CONFIG_MFD_MADERA) += madera.o
obj-$(CONFIG_MFD_MADERA_I2C) += madera-i2c.o
obj-$(CONFIG_MFD_MADERA_SPI) += madera-spi.o
+obj-$(CONFIG_MFD_CS40L50_CORE) += cs40l50-core.o
+obj-$(CONFIG_MFD_CS40L50_I2C) += cs40l50-i2c.o
+obj-$(CONFIG_MFD_CS40L50_SPI) += cs40l50-spi.o
+
obj-$(CONFIG_TPS6105X) += tps6105x.o
obj-$(CONFIG_TPS65010) += tps65010.o
obj-$(CONFIG_TPS6507X) += tps6507x.o
new file mode 100644
@@ -0,0 +1,570 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * CS40L50 Advanced Haptic Driver with waveform memory,
+ * integrated DSP, and closed-loop algorithms
+ *
+ * Copyright 2024 Cirrus Logic, Inc.
+ *
+ * Author: James Ogletree <james.ogletree@cirrus.com>
+ */
+
+#include <linux/firmware/cirrus/cs_dsp.h>
+#include <linux/firmware/cirrus/wmfw.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/cs40l50.h>
+#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
+
+static const struct mfd_cell cs40l50_devs[] = {
+ { .name = "cs40l50-codec", },
+ { .name = "cs40l50-vibra", },
+};
+
+const struct regmap_config cs40l50_regmap = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .reg_format_endian = REGMAP_ENDIAN_BIG,
+ .val_format_endian = REGMAP_ENDIAN_BIG,
+};
+EXPORT_SYMBOL_GPL(cs40l50_regmap);
+
+static const char * const cs40l50_supplies[] = {
+ "vdd-io",
+};
+
+static const struct regmap_irq cs40l50_reg_irqs[] = {
+ REGMAP_IRQ_REG(CS40L50_DSP_QUEUE_IRQ, CS40L50_IRQ1_INT_2_OFFSET,
+ CS40L50_DSP_QUEUE_MASK),
+ REGMAP_IRQ_REG(CS40L50_AMP_SHORT_IRQ, CS40L50_IRQ1_INT_1_OFFSET,
+ CS40L50_AMP_SHORT_MASK),
+ REGMAP_IRQ_REG(CS40L50_TEMP_ERR_IRQ, CS40L50_IRQ1_INT_8_OFFSET,
+ CS40L50_TEMP_ERR_MASK),
+ REGMAP_IRQ_REG(CS40L50_BST_UVP_IRQ, CS40L50_IRQ1_INT_9_OFFSET,
+ CS40L50_BST_UVP_MASK),
+ REGMAP_IRQ_REG(CS40L50_BST_SHORT_IRQ, CS40L50_IRQ1_INT_9_OFFSET,
+ CS40L50_BST_SHORT_MASK),
+ REGMAP_IRQ_REG(CS40L50_BST_ILIMIT_IRQ, CS40L50_IRQ1_INT_9_OFFSET,
+ CS40L50_BST_ILIMIT_MASK),
+ REGMAP_IRQ_REG(CS40L50_UVLO_VDDBATT_IRQ, CS40L50_IRQ1_INT_10_OFFSET,
+ CS40L50_UVLO_VDDBATT_MASK),
+ REGMAP_IRQ_REG(CS40L50_GLOBAL_ERROR_IRQ, CS40L50_IRQ1_INT_18_OFFSET,
+ CS40L50_GLOBAL_ERROR_MASK),
+};
+
+static struct regmap_irq_chip cs40l50_irq_chip = {
+ .name = "cs40l50",
+ .status_base = CS40L50_IRQ1_INT_1,
+ .mask_base = CS40L50_IRQ1_MASK_1,
+ .ack_base = CS40L50_IRQ1_INT_1,
+ .num_regs = 22,
+ .irqs = cs40l50_reg_irqs,
+ .num_irqs = ARRAY_SIZE(cs40l50_reg_irqs),
+ .runtime_pm = true,
+};
+
+int cs40l50_dsp_write(struct device *dev, struct regmap *regmap, u32 val)
+{
+ int i, ret;
+ u32 ack;
+
+ /* Device NAKs if hibernating, so optionally retry */
+ for (i = 0; i < CS40L50_DSP_TIMEOUT_COUNT; i++) {
+ ret = regmap_write(regmap, CS40L50_DSP_QUEUE, val);
+ if (!ret)
+ break;
+
+ usleep_range(CS40L50_DSP_POLL_US, CS40L50_DSP_POLL_US + 100);
+ }
+
+ /* If write never occurred, don't bother polling for ACK */
+ if (i == CS40L50_DSP_TIMEOUT_COUNT) {
+ dev_err(dev, "Timed out writing %#X to DSP: %d\n", val, ret);
+ return ret;
+ }
+
+ ret = regmap_read_poll_timeout(regmap, CS40L50_DSP_QUEUE, ack, !ack,
+ CS40L50_DSP_POLL_US,
+ CS40L50_DSP_POLL_US * CS40L50_DSP_TIMEOUT_COUNT);
+ if (ret)
+ dev_err(dev, "DSP failed to ACK %#X: %d\n", val, ret);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(cs40l50_dsp_write);
+
+static const struct cs_dsp_region cs40l50_dsp_regions[] = {
+ { .type = WMFW_HALO_PM_PACKED, .base = CS40L50_PMEM_0 },
+ { .type = WMFW_HALO_XM_PACKED, .base = CS40L50_XMEM_PACKED_0 },
+ { .type = WMFW_HALO_YM_PACKED, .base = CS40L50_YMEM_PACKED_0 },
+ { .type = WMFW_ADSP2_XM, .base = CS40L50_XMEM_UNPACKED24_0 },
+ { .type = WMFW_ADSP2_YM, .base = CS40L50_YMEM_UNPACKED24_0 },
+};
+
+static const struct reg_sequence cs40l50_internal_vamp_config[] = {
+ { CS40L50_BST_LPMODE_SEL, CS40L50_DCM_LOW_POWER },
+ { CS40L50_BLOCK_ENABLES2, CS40L50_OVERTEMP_WARN },
+};
+
+static const struct reg_sequence cs40l50_irq_mask_override[] = {
+ { CS40L50_IRQ1_MASK_2, CS40L50_IRQ_MASK_2_OVERRIDE },
+ { CS40L50_IRQ1_MASK_20, CS40L50_IRQ_MASK_20_OVERRIDE },
+};
+
+static int cs40l50_wseq_init(struct cs40l50 *cs40l50)
+{
+ struct cs_dsp *dsp = &cs40l50->dsp;
+
+ cs40l50->wseqs[CS40L50_STANDBY].ctl = cs_dsp_get_ctl(dsp, "STANDBY_SEQUENCE",
+ WMFW_ADSP2_XM,
+ CS40L50_PM_ALGO);
+ if (!cs40l50->wseqs[CS40L50_STANDBY].ctl) {
+ dev_err(cs40l50->dev, "Control not found for standby sequence\n");
+ return -ENOENT;
+ }
+
+ cs40l50->wseqs[CS40L50_ACTIVE].ctl = cs_dsp_get_ctl(dsp, "ACTIVE_SEQUENCE",
+ WMFW_ADSP2_XM,
+ CS40L50_PM_ALGO);
+ if (!cs40l50->wseqs[CS40L50_ACTIVE].ctl) {
+ dev_err(cs40l50->dev, "Control not found for active sequence\n");
+ return -ENOENT;
+ }
+
+ cs40l50->wseqs[CS40L50_PWR_ON].ctl = cs_dsp_get_ctl(dsp, "PM_PWR_ON_SEQ",
+ WMFW_ADSP2_XM,
+ CS40L50_PM_ALGO);
+ if (!cs40l50->wseqs[CS40L50_PWR_ON].ctl) {
+ dev_err(cs40l50->dev, "Control not found for power-on sequence\n");
+ return -ENOENT;
+ }
+
+ return cs_dsp_wseq_init(&cs40l50->dsp, cs40l50->wseqs, ARRAY_SIZE(cs40l50->wseqs));
+}
+
+static int cs40l50_dsp_config(struct cs40l50 *cs40l50)
+{
+ int ret;
+
+ /* Configure internal V_AMP supply */
+ ret = regmap_multi_reg_write(cs40l50->regmap, cs40l50_internal_vamp_config,
+ ARRAY_SIZE(cs40l50_internal_vamp_config));
+ if (ret)
+ return ret;
+
+ ret = cs_dsp_wseq_multi_write(&cs40l50->dsp, &cs40l50->wseqs[CS40L50_PWR_ON],
+ cs40l50_internal_vamp_config, CS_DSP_WSEQ_FULL,
+ ARRAY_SIZE(cs40l50_internal_vamp_config), false);
+ if (ret)
+ return ret;
+
+ /* Override firmware defaults for IRQ masks */
+ ret = regmap_multi_reg_write(cs40l50->regmap, cs40l50_irq_mask_override,
+ ARRAY_SIZE(cs40l50_irq_mask_override));
+ if (ret)
+ return ret;
+
+ return cs_dsp_wseq_multi_write(&cs40l50->dsp, &cs40l50->wseqs[CS40L50_PWR_ON],
+ cs40l50_irq_mask_override, CS_DSP_WSEQ_FULL,
+ ARRAY_SIZE(cs40l50_irq_mask_override), false);
+}
+
+static int cs40l50_dsp_post_run(struct cs_dsp *dsp)
+{
+ struct cs40l50 *cs40l50 = container_of(dsp, struct cs40l50, dsp);
+ int ret;
+
+ ret = cs40l50_wseq_init(cs40l50);
+ if (ret)
+ return ret;
+
+ ret = cs40l50_dsp_config(cs40l50);
+ if (ret) {
+ dev_err(cs40l50->dev, "Failed to configure DSP: %d\n", ret);
+ return ret;
+ }
+
+ ret = devm_mfd_add_devices(cs40l50->dev, PLATFORM_DEVID_NONE, cs40l50_devs,
+ ARRAY_SIZE(cs40l50_devs), NULL, 0, NULL);
+ if (ret)
+ dev_err(cs40l50->dev, "Failed to add child devices: %d\n", ret);
+
+ return ret;
+}
+
+static const struct cs_dsp_client_ops client_ops = {
+ .post_run = cs40l50_dsp_post_run,
+};
+
+static void cs40l50_dsp_remove(void *data)
+{
+ cs_dsp_remove(data);
+}
+
+static int cs40l50_dsp_init(struct cs40l50 *cs40l50)
+{
+ int ret;
+
+ cs40l50->dsp.num = 1;
+ cs40l50->dsp.type = WMFW_HALO;
+ cs40l50->dsp.dev = cs40l50->dev;
+ cs40l50->dsp.regmap = cs40l50->regmap;
+ cs40l50->dsp.base = CS40L50_CORE_BASE;
+ cs40l50->dsp.base_sysinfo = CS40L50_SYS_INFO_ID;
+ cs40l50->dsp.mem = cs40l50_dsp_regions;
+ cs40l50->dsp.num_mems = ARRAY_SIZE(cs40l50_dsp_regions);
+ cs40l50->dsp.no_core_startstop = true;
+ cs40l50->dsp.client_ops = &client_ops;
+
+ ret = cs_dsp_halo_init(&cs40l50->dsp);
+ if (ret)
+ return ret;
+
+ return devm_add_action_or_reset(cs40l50->dev, cs40l50_dsp_remove,
+ &cs40l50->dsp);
+}
+
+static int cs40l50_reset_dsp(struct cs40l50 *cs40l50)
+{
+ int ret;
+
+ mutex_lock(&cs40l50->lock);
+
+ if (cs40l50->dsp.running)
+ cs_dsp_stop(&cs40l50->dsp);
+
+ if (cs40l50->dsp.booted)
+ cs_dsp_power_down(&cs40l50->dsp);
+
+ ret = cs40l50_dsp_write(cs40l50->dev, cs40l50->regmap, CS40L50_SHUTDOWN);
+ if (ret)
+ goto err_mutex;
+
+ ret = cs_dsp_power_up(&cs40l50->dsp, cs40l50->fw, "cs40l50.wmfw",
+ cs40l50->bin, "cs40l50.bin", "cs40l50");
+ if (ret)
+ goto err_mutex;
+
+ ret = cs40l50_dsp_write(cs40l50->dev, cs40l50->regmap, CS40L50_SYSTEM_RESET);
+ if (ret)
+ goto err_mutex;
+
+ ret = cs40l50_dsp_write(cs40l50->dev, cs40l50->regmap, CS40L50_PREVENT_HIBER);
+ if (ret)
+ goto err_mutex;
+
+ ret = cs_dsp_run(&cs40l50->dsp);
+err_mutex:
+ mutex_unlock(&cs40l50->lock);
+
+ return ret;
+}
+
+static void cs40l50_dsp_power_down(void *data)
+{
+ cs_dsp_power_down(data);
+}
+
+static void cs40l50_dsp_stop(void *data)
+{
+ cs_dsp_stop(data);
+}
+
+static void cs40l50_dsp_bringup(const struct firmware *bin, void *context)
+{
+ struct cs40l50 *cs40l50 = context;
+ u32 nwaves;
+ int ret;
+
+ /* Wavetable is optional; bringup DSP regardless */
+ cs40l50->bin = bin;
+
+ ret = cs40l50_reset_dsp(cs40l50);
+ if (ret) {
+ dev_err(cs40l50->dev, "Failed to reset DSP: %d\n", ret);
+ goto err_fw;
+ }
+
+ ret = regmap_read(cs40l50->regmap, CS40L50_NUM_WAVES, &nwaves);
+ if (ret)
+ goto err_fw;
+
+ dev_info(cs40l50->dev, "%u RAM effects loaded\n", nwaves);
+
+ /* Add teardown actions for first-time bringup */
+ ret = devm_add_action_or_reset(cs40l50->dev, cs40l50_dsp_power_down,
+ &cs40l50->dsp);
+ if (ret) {
+ dev_err(cs40l50->dev, "Failed to add power down action: %d\n", ret);
+ goto err_fw;
+ }
+
+ ret = devm_add_action_or_reset(cs40l50->dev, cs40l50_dsp_stop, &cs40l50->dsp);
+ if (ret)
+ dev_err(cs40l50->dev, "Failed to add stop action: %d\n", ret);
+err_fw:
+ release_firmware(cs40l50->bin);
+ release_firmware(cs40l50->fw);
+}
+
+static void cs40l50_request_firmware(const struct firmware *fw, void *context)
+{
+ struct cs40l50 *cs40l50 = context;
+ int ret;
+
+ if (!fw) {
+ dev_err(cs40l50->dev, "No firmware file found\n");
+ return;
+ }
+
+ cs40l50->fw = fw;
+
+ ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_UEVENT, CS40L50_WT,
+ cs40l50->dev, GFP_KERNEL, cs40l50,
+ cs40l50_dsp_bringup);
+ if (ret) {
+ dev_err(cs40l50->dev, "Failed to request %s: %d\n", CS40L50_WT, ret);
+ release_firmware(cs40l50->fw);
+ }
+}
+
+struct cs40l50_irq {
+ const char *name;
+ int virq;
+};
+
+static struct cs40l50_irq cs40l50_irqs[] = {
+ { "DSP", },
+ { "Global", },
+ { "Boost UVLO", },
+ { "Boost current limit", },
+ { "Boost short", },
+ { "Boost undervolt", },
+ { "Overtemp", },
+ { "Amp short", },
+};
+
+static const struct reg_sequence cs40l50_err_rls[] = {
+ { CS40L50_ERR_RLS, CS40L50_GLOBAL_ERR_RLS_SET },
+ { CS40L50_ERR_RLS, CS40L50_GLOBAL_ERR_RLS_CLEAR },
+};
+
+static irqreturn_t cs40l50_hw_err(int irq, void *data)
+{
+ struct cs40l50 *cs40l50 = data;
+ int ret = 0, i;
+
+ mutex_lock(&cs40l50->lock);
+
+ /* Log hardware interrupt and execute error release sequence */
+ for (i = 1; i < ARRAY_SIZE(cs40l50_irqs); i++) {
+ if (cs40l50_irqs[i].virq == irq) {
+ dev_err(cs40l50->dev, "%s error\n", cs40l50_irqs[i].name);
+ ret = regmap_multi_reg_write(cs40l50->regmap, cs40l50_err_rls,
+ ARRAY_SIZE(cs40l50_err_rls));
+ break;
+ }
+ }
+
+ mutex_unlock(&cs40l50->lock);
+ return IRQ_RETVAL(!ret);
+}
+
+static irqreturn_t cs40l50_dsp_queue(int irq, void *data)
+{
+ struct cs40l50 *cs40l50 = data;
+ u32 rd_ptr, val, wt_ptr;
+ int ret = 0;
+
+ mutex_lock(&cs40l50->lock);
+
+ /* Read from DSP queue, log, and update read pointer */
+ while (!ret) {
+ ret = regmap_read(cs40l50->regmap, CS40L50_DSP_QUEUE_WT, &wt_ptr);
+ if (ret)
+ break;
+
+ ret = regmap_read(cs40l50->regmap, CS40L50_DSP_QUEUE_RD, &rd_ptr);
+ if (ret)
+ break;
+
+ /* Check if queue is empty */
+ if (wt_ptr == rd_ptr)
+ break;
+
+ ret = regmap_read(cs40l50->regmap, rd_ptr, &val);
+ if (ret)
+ break;
+
+ dev_dbg(cs40l50->dev, "DSP payload: %#X", val);
+
+ rd_ptr += sizeof(u32);
+
+ if (rd_ptr > CS40L50_DSP_QUEUE_END)
+ rd_ptr = CS40L50_DSP_QUEUE_BASE;
+
+ ret = regmap_write(cs40l50->regmap, CS40L50_DSP_QUEUE_RD, rd_ptr);
+ }
+
+ mutex_unlock(&cs40l50->lock);
+
+ return IRQ_RETVAL(!ret);
+}
+
+static int cs40l50_irq_init(struct cs40l50 *cs40l50)
+{
+ int ret, i, virq;
+
+ ret = devm_regmap_add_irq_chip(cs40l50->dev, cs40l50->regmap, cs40l50->irq,
+ IRQF_ONESHOT | IRQF_SHARED, 0,
+ &cs40l50_irq_chip, &cs40l50->irq_data);
+ if (ret) {
+ dev_err(cs40l50->dev, "Failed adding IRQ chip\n");
+ return ret;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(cs40l50_irqs); i++) {
+ virq = regmap_irq_get_virq(cs40l50->irq_data, i);
+ if (virq < 0) {
+ dev_err(cs40l50->dev, "Failed getting virq for %s\n",
+ cs40l50_irqs[i].name);
+ return virq;
+ }
+
+ cs40l50_irqs[i].virq = virq;
+
+ /* Handle DSP and hardware interrupts separately */
+ ret = devm_request_threaded_irq(cs40l50->dev, virq, NULL,
+ i ? cs40l50_hw_err : cs40l50_dsp_queue,
+ IRQF_ONESHOT | IRQF_SHARED,
+ cs40l50_irqs[i].name, cs40l50);
+ if (ret) {
+ return dev_err_probe(cs40l50->dev, ret,
+ "Failed requesting %s IRQ\n",
+ cs40l50_irqs[i].name);
+ }
+ }
+
+ return 0;
+}
+
+static int cs40l50_get_model(struct cs40l50 *cs40l50)
+{
+ int ret;
+
+ ret = regmap_read(cs40l50->regmap, CS40L50_DEVID, &cs40l50->devid);
+ if (ret)
+ return ret;
+
+ if (cs40l50->devid != CS40L50_DEVID_A)
+ return -EINVAL;
+
+ ret = regmap_read(cs40l50->regmap, CS40L50_REVID, &cs40l50->revid);
+ if (ret)
+ return ret;
+
+ if (cs40l50->revid < CS40L50_REVID_B0)
+ return -EINVAL;
+
+ dev_dbg(cs40l50->dev, "Cirrus Logic CS40L50 rev. %02X\n", cs40l50->revid);
+
+ return 0;
+}
+
+static int cs40l50_pm_runtime_setup(struct device *dev)
+{
+ int ret;
+
+ pm_runtime_set_autosuspend_delay(dev, CS40L50_AUTOSUSPEND_MS);
+ pm_runtime_use_autosuspend(dev);
+ pm_runtime_get_noresume(dev);
+ ret = pm_runtime_set_active(dev);
+ if (ret)
+ return ret;
+
+ return devm_pm_runtime_enable(dev);
+}
+
+int cs40l50_probe(struct cs40l50 *cs40l50)
+{
+ struct device *dev = cs40l50->dev;
+ int ret;
+
+ mutex_init(&cs40l50->lock);
+
+ cs40l50->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
+ if (IS_ERR(cs40l50->reset_gpio))
+ return dev_err_probe(dev, PTR_ERR(cs40l50->reset_gpio),
+ "Failed getting reset GPIO\n");
+
+ ret = devm_regulator_bulk_get_enable(dev, ARRAY_SIZE(cs40l50_supplies),
+ cs40l50_supplies);
+ if (ret)
+ return dev_err_probe(dev, ret, "Failed getting supplies\n");
+
+ /* Ensure minimum reset pulse width */
+ usleep_range(CS40L50_RESET_PULSE_US, CS40L50_RESET_PULSE_US + 100);
+
+ gpiod_set_value_cansleep(cs40l50->reset_gpio, 0);
+
+ /* Wait for control port to be ready */
+ usleep_range(CS40L50_CP_READY_US, CS40L50_CP_READY_US + 100);
+
+ ret = cs40l50_get_model(cs40l50);
+ if (ret)
+ return dev_err_probe(dev, ret, "Failed to get part number\n");
+
+ ret = cs40l50_dsp_init(cs40l50);
+ if (ret)
+ return dev_err_probe(dev, ret, "Failed to initialize DSP\n");
+
+ ret = cs40l50_pm_runtime_setup(dev);
+ if (ret)
+ return dev_err_probe(dev, ret, "Failed to initialize runtime PM\n");
+
+ ret = cs40l50_irq_init(cs40l50);
+ if (ret)
+ return ret;
+
+ ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_UEVENT, CS40L50_FW,
+ dev, GFP_KERNEL, cs40l50, cs40l50_request_firmware);
+ if (ret)
+ return dev_err_probe(dev, ret, "Failed to request %s\n", CS40L50_FW);
+
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_put_autosuspend(dev);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(cs40l50_probe);
+
+int cs40l50_remove(struct cs40l50 *cs40l50)
+{
+ gpiod_set_value_cansleep(cs40l50->reset_gpio, 1);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(cs40l50_remove);
+
+static int cs40l50_runtime_suspend(struct device *dev)
+{
+ struct cs40l50 *cs40l50 = dev_get_drvdata(dev);
+
+ return regmap_write(cs40l50->regmap, CS40L50_DSP_QUEUE, CS40L50_ALLOW_HIBER);
+}
+
+static int cs40l50_runtime_resume(struct device *dev)
+{
+ struct cs40l50 *cs40l50 = dev_get_drvdata(dev);
+
+ return cs40l50_dsp_write(dev, cs40l50->regmap, CS40L50_PREVENT_HIBER);
+}
+
+EXPORT_GPL_DEV_PM_OPS(cs40l50_pm_ops) = {
+ RUNTIME_PM_OPS(cs40l50_runtime_suspend, cs40l50_runtime_resume, NULL)
+};
+
+MODULE_DESCRIPTION("CS40L50 Advanced Haptic Driver");
+MODULE_AUTHOR("James Ogletree, Cirrus Logic Inc. <james.ogletree@cirrus.com>");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(FW_CS_DSP);
new file mode 100644
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * CS40L50 Advanced Haptic Driver with waveform memory,
+ * integrated DSP, and closed-loop algorithms
+ *
+ * Copyright 2024 Cirrus Logic, Inc.
+ *
+ * Author: James Ogletree <james.ogletree@cirrus.com>
+ */
+
+#include <linux/i2c.h>
+#include <linux/mfd/cs40l50.h>
+
+static int cs40l50_i2c_probe(struct i2c_client *i2c)
+{
+ struct cs40l50 *cs40l50;
+
+ cs40l50 = devm_kzalloc(&i2c->dev, sizeof(*cs40l50), GFP_KERNEL);
+ if (!cs40l50)
+ return -ENOMEM;
+
+ i2c_set_clientdata(i2c, cs40l50);
+
+ cs40l50->dev = &i2c->dev;
+ cs40l50->irq = i2c->irq;
+
+ cs40l50->regmap = devm_regmap_init_i2c(i2c, &cs40l50_regmap);
+ if (IS_ERR(cs40l50->regmap))
+ return dev_err_probe(cs40l50->dev, PTR_ERR(cs40l50->regmap),
+ "Failed to initialize register map\n");
+
+ return cs40l50_probe(cs40l50);
+}
+
+static void cs40l50_i2c_remove(struct i2c_client *i2c)
+{
+ struct cs40l50 *cs40l50 = i2c_get_clientdata(i2c);
+
+ cs40l50_remove(cs40l50);
+}
+
+static const struct i2c_device_id cs40l50_id_i2c[] = {
+ { "cs40l50" },
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, cs40l50_id_i2c);
+
+static const struct of_device_id cs40l50_of_match[] = {
+ { .compatible = "cirrus,cs40l50" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, cs40l50_of_match);
+
+static struct i2c_driver cs40l50_i2c_driver = {
+ .driver = {
+ .name = "cs40l50",
+ .of_match_table = cs40l50_of_match,
+ .pm = pm_ptr(&cs40l50_pm_ops),
+ },
+ .id_table = cs40l50_id_i2c,
+ .probe = cs40l50_i2c_probe,
+ .remove = cs40l50_i2c_remove,
+};
+module_i2c_driver(cs40l50_i2c_driver);
+
+MODULE_DESCRIPTION("CS40L50 I2C Driver");
+MODULE_AUTHOR("James Ogletree, Cirrus Logic Inc. <james.ogletree@cirrus.com>");
+MODULE_LICENSE("GPL");
new file mode 100644
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * CS40L50 Advanced Haptic Driver with waveform memory,
+ * integrated DSP, and closed-loop algorithms
+ *
+ * Copyright 2024 Cirrus Logic, Inc.
+ *
+ * Author: James Ogletree <james.ogletree@cirrus.com>
+ */
+
+#include <linux/mfd/cs40l50.h>
+#include <linux/spi/spi.h>
+
+static int cs40l50_spi_probe(struct spi_device *spi)
+{
+ struct cs40l50 *cs40l50;
+
+ cs40l50 = devm_kzalloc(&spi->dev, sizeof(*cs40l50), GFP_KERNEL);
+ if (!cs40l50)
+ return -ENOMEM;
+
+ spi_set_drvdata(spi, cs40l50);
+
+ cs40l50->dev = &spi->dev;
+ cs40l50->irq = spi->irq;
+
+ cs40l50->regmap = devm_regmap_init_spi(spi, &cs40l50_regmap);
+ if (IS_ERR(cs40l50->regmap))
+ return dev_err_probe(cs40l50->dev, PTR_ERR(cs40l50->regmap),
+ "Failed to initialize register map\n");
+
+ return cs40l50_probe(cs40l50);
+}
+
+static void cs40l50_spi_remove(struct spi_device *spi)
+{
+ struct cs40l50 *cs40l50 = spi_get_drvdata(spi);
+
+ cs40l50_remove(cs40l50);
+}
+
+static const struct spi_device_id cs40l50_id_spi[] = {
+ { "cs40l50" },
+ {}
+};
+MODULE_DEVICE_TABLE(spi, cs40l50_id_spi);
+
+static const struct of_device_id cs40l50_of_match[] = {
+ { .compatible = "cirrus,cs40l50" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, cs40l50_of_match);
+
+static struct spi_driver cs40l50_spi_driver = {
+ .driver = {
+ .name = "cs40l50",
+ .of_match_table = cs40l50_of_match,
+ .pm = pm_ptr(&cs40l50_pm_ops),
+ },
+ .id_table = cs40l50_id_spi,
+ .probe = cs40l50_spi_probe,
+ .remove = cs40l50_spi_remove,
+};
+module_spi_driver(cs40l50_spi_driver);
+
+MODULE_DESCRIPTION("CS40L50 SPI Driver");
+MODULE_AUTHOR("James Ogletree, Cirrus Logic Inc. <james.ogletree@cirrus.com>");
+MODULE_LICENSE("GPL");
new file mode 100644
@@ -0,0 +1,137 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * CS40L50 Advanced Haptic Driver with waveform memory,
+ * integrated DSP, and closed-loop algorithms
+ *
+ * Copyright 2024 Cirrus Logic, Inc.
+ *
+ * Author: James Ogletree <james.ogletree@cirrus.com>
+ */
+
+#ifndef __MFD_CS40L50_H__
+#define __MFD_CS40L50_H__
+
+#include <linux/firmware/cirrus/cs_dsp.h>
+#include <linux/gpio/consumer.h>
+#include <linux/pm.h>
+#include <linux/regmap.h>
+
+/* Power Supply Configuration */
+#define CS40L50_BLOCK_ENABLES2 0x201C
+#define CS40L50_ERR_RLS 0x2034
+#define CS40L50_BST_LPMODE_SEL 0x3810
+#define CS40L50_DCM_LOW_POWER 0x1
+#define CS40L50_OVERTEMP_WARN 0x4000010
+
+/* Interrupts */
+#define CS40L50_IRQ1_INT_1 0xE010
+#define CS40L50_IRQ1_BASE CS40L50_IRQ1_INT_1
+#define CS40L50_IRQ1_INT_2 0xE014
+#define CS40L50_IRQ1_INT_8 0xE02C
+#define CS40L50_IRQ1_INT_9 0xE030
+#define CS40L50_IRQ1_INT_10 0xE034
+#define CS40L50_IRQ1_INT_18 0xE054
+#define CS40L50_IRQ1_MASK_1 0xE090
+#define CS40L50_IRQ1_MASK_2 0xE094
+#define CS40L50_IRQ1_MASK_20 0xE0DC
+#define CS40L50_IRQ1_INT_1_OFFSET (CS40L50_IRQ1_INT_1 - CS40L50_IRQ1_BASE)
+#define CS40L50_IRQ1_INT_2_OFFSET (CS40L50_IRQ1_INT_2 - CS40L50_IRQ1_BASE)
+#define CS40L50_IRQ1_INT_8_OFFSET (CS40L50_IRQ1_INT_8 - CS40L50_IRQ1_BASE)
+#define CS40L50_IRQ1_INT_9_OFFSET (CS40L50_IRQ1_INT_9 - CS40L50_IRQ1_BASE)
+#define CS40L50_IRQ1_INT_10_OFFSET (CS40L50_IRQ1_INT_10 - CS40L50_IRQ1_BASE)
+#define CS40L50_IRQ1_INT_18_OFFSET (CS40L50_IRQ1_INT_18 - CS40L50_IRQ1_BASE)
+#define CS40L50_IRQ_MASK_2_OVERRIDE 0xFFDF7FFF
+#define CS40L50_IRQ_MASK_20_OVERRIDE 0x15C01000
+#define CS40L50_AMP_SHORT_MASK BIT(31)
+#define CS40L50_DSP_QUEUE_MASK BIT(21)
+#define CS40L50_TEMP_ERR_MASK BIT(31)
+#define CS40L50_BST_UVP_MASK BIT(6)
+#define CS40L50_BST_SHORT_MASK BIT(7)
+#define CS40L50_BST_ILIMIT_MASK BIT(18)
+#define CS40L50_UVLO_VDDBATT_MASK BIT(16)
+#define CS40L50_GLOBAL_ERROR_MASK BIT(15)
+
+enum cs40l50_irq_list {
+ CS40L50_DSP_QUEUE_IRQ,
+ CS40L50_GLOBAL_ERROR_IRQ,
+ CS40L50_UVLO_VDDBATT_IRQ,
+ CS40L50_BST_ILIMIT_IRQ,
+ CS40L50_BST_SHORT_IRQ,
+ CS40L50_BST_UVP_IRQ,
+ CS40L50_TEMP_ERR_IRQ,
+ CS40L50_AMP_SHORT_IRQ,
+};
+
+/* DSP */
+#define CS40L50_XMEM_PACKED_0 0x2000000
+#define CS40L50_XMEM_UNPACKED24_0 0x2800000
+#define CS40L50_SYS_INFO_ID 0x25E0000
+#define CS40L50_DSP_QUEUE_WT 0x28042C8
+#define CS40L50_DSP_QUEUE_RD 0x28042CC
+#define CS40L50_NUM_WAVES 0x2805C18
+#define CS40L50_CORE_BASE 0x2B80000
+#define CS40L50_YMEM_PACKED_0 0x2C00000
+#define CS40L50_YMEM_UNPACKED24_0 0x3400000
+#define CS40L50_PMEM_0 0x3800000
+#define CS40L50_DSP_POLL_US 1000
+#define CS40L50_DSP_TIMEOUT_COUNT 100
+#define CS40L50_RESET_PULSE_US 2200
+#define CS40L50_CP_READY_US 3100
+#define CS40L50_AUTOSUSPEND_MS 2000
+#define CS40L50_PM_ALGO 0x9F206
+#define CS40L50_GLOBAL_ERR_RLS_SET BIT(11)
+#define CS40L50_GLOBAL_ERR_RLS_CLEAR 0
+
+enum cs40l50_wseqs {
+ CS40L50_PWR_ON,
+ CS40L50_STANDBY,
+ CS40L50_ACTIVE,
+ CS40L50_NUM_WSEQS,
+};
+
+/* DSP Queue */
+#define CS40L50_DSP_QUEUE_BASE 0x11004
+#define CS40L50_DSP_QUEUE_END 0x1101C
+#define CS40L50_DSP_QUEUE 0x11020
+#define CS40L50_PREVENT_HIBER 0x2000003
+#define CS40L50_ALLOW_HIBER 0x2000004
+#define CS40L50_SHUTDOWN 0x2000005
+#define CS40L50_SYSTEM_RESET 0x2000007
+#define CS40L50_START_I2S 0x3000002
+#define CS40L50_OWT_PUSH 0x3000008
+#define CS40L50_STOP_PLAYBACK 0x5000000
+#define CS40L50_OWT_DELETE 0xD000000
+
+/* Firmware files */
+#define CS40L50_FW "cs40l50.wmfw"
+#define CS40L50_WT "cs40l50.bin"
+
+/* Device */
+#define CS40L50_DEVID 0x0
+#define CS40L50_REVID 0x4
+#define CS40L50_DEVID_A 0x40A50
+#define CS40L50_REVID_B0 0xB0
+
+struct cs40l50 {
+ struct device *dev;
+ struct regmap *regmap;
+ struct mutex lock;
+ struct cs_dsp dsp;
+ struct gpio_desc *reset_gpio;
+ struct regmap_irq_chip_data *irq_data;
+ const struct firmware *fw;
+ const struct firmware *bin;
+ struct cs_dsp_wseq wseqs[CS40L50_NUM_WSEQS];
+ int irq;
+ u32 devid;
+ u32 revid;
+};
+
+int cs40l50_dsp_write(struct device *dev, struct regmap *regmap, u32 val);
+int cs40l50_probe(struct cs40l50 *cs40l50);
+int cs40l50_remove(struct cs40l50 *cs40l50);
+
+extern const struct regmap_config cs40l50_regmap;
+extern const struct dev_pm_ops cs40l50_pm_ops;
+
+#endif /* __MFD_CS40L50_H__ */
Introduce support for Cirrus Logic Device CS40L50: a haptic driver with waveform memory, integrated DSP, and closed-loop algorithms. The MFD component registers and initializes the device. Signed-off-by: James Ogletree <jogletre@opensource.cirrus.com> --- MAINTAINERS | 2 + drivers/mfd/Kconfig | 30 ++ drivers/mfd/Makefile | 4 + drivers/mfd/cs40l50-core.c | 570 ++++++++++++++++++++++++++++++++++++ drivers/mfd/cs40l50-i2c.c | 68 +++++ drivers/mfd/cs40l50-spi.c | 68 +++++ include/linux/mfd/cs40l50.h | 137 +++++++++ 7 files changed, 879 insertions(+) create mode 100644 drivers/mfd/cs40l50-core.c create mode 100644 drivers/mfd/cs40l50-i2c.c create mode 100644 drivers/mfd/cs40l50-spi.c create mode 100644 include/linux/mfd/cs40l50.h