@@ -8,6 +8,7 @@
#include <linux/array_size.h>
#include <linux/i2c.h>
#include <linux/of.h>
+#include <linux/of_graph.h>
#include <linux/platform_device.h>
#define DRV_NAME "hw_prober"
@@ -108,9 +109,168 @@ static int i2c_component_prober(struct platform_device *pdev, const void *data)
return ret;
}
+static int cros_get_coreboot_sku_id(struct device *dev, u32 *sku_id)
+{
+ struct device_node *node = NULL;
+ int ret;
+
+ node = of_find_node_by_path("/firmware/coreboot");
+ if (!node)
+ return dev_err_probe(dev, -EINVAL, "Cannot find coreboot firmware node\n");
+
+ ret = of_property_read_u32(node, "sku-id", sku_id);
+ if (ret)
+ dev_err_probe(dev, ret, "Cannot get SKU ID\n");
+
+ of_node_put(node);
+ return ret;
+}
+
+struct cros_sku_option {
+ u32 sku_id_val;
+ u32 sku_id_mask;
+ const char *compatible;
+};
+
+struct cros_sku_component_data {
+ const struct cros_sku_option *options;
+ int num_options;
+};
+
+/*
+ * cros_sku_component_selector - Selectively enable a component based on SKU ID
+ *
+ * Based on the list of component options and SKU ID read back from the device
+ * tree, enable the matching component. Also update the OF graph if it exists,
+ * so that the enabled component's remote endpoint correctly points to it. This
+ * assumes a single local endpoint, which should be the case for panels and
+ * camera sensors.
+ */
+static int cros_sku_component_selector(struct platform_device *pdev, const void *data)
+{
+ const struct cros_sku_component_data *pdata = data;
+ const char *compatible;
+ struct device_node *node = NULL, *endpoint = NULL, *remote = NULL;
+ struct property *status_prop = NULL, *endpoint_prop = NULL;
+ struct of_changeset *ocs = NULL;
+ __be32 *val = NULL;
+ int ret, i;
+ u32 sku_id;
+
+ if (!data)
+ return dev_err_probe(&pdev->dev, -EINVAL, "No data given\n");
+
+ ret = cros_get_coreboot_sku_id(&pdev->dev, &sku_id);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < pdata->num_options; i++)
+ if ((sku_id & pdata->options[i].sku_id_mask) == pdata->options[i].sku_id_val) {
+ compatible = pdata->options->compatible;
+ break;
+ }
+
+ if (i == pdata->num_options)
+ return dev_err_probe(&pdev->dev, -EINVAL, "Unknown SKU ID: 0x%x\n", sku_id);
+
+ node = of_find_compatible_node(NULL, NULL, compatible);
+ if (!node)
+ return dev_err_probe(&pdev->dev, -ENODEV, "Cannot find matching device node\n");
+
+ /* device node not marked as fail; don't mess with the device tree */
+ if (!of_device_is_fail(node))
+ goto err_free;
+
+ dev_info(&pdev->dev, "Enabling %pOF for SKU 0x%x\n", node, sku_id);
+
+ ret = -ENOMEM;
+ ocs = kzalloc(sizeof(*ocs), GFP_KERNEL);
+ if (!ocs)
+ goto err_free;
+
+ status_prop = kzalloc(sizeof(*status_prop), GFP_KERNEL);
+ if (!status_prop)
+ goto err_free;
+
+ status_prop->name = "status";
+ status_prop->length = 5;
+ status_prop->value = "okay";
+
+ /* Create changeset to apply DT changes atomically */
+ of_changeset_init(ocs);
+
+ if (of_graph_is_present(node)) {
+ ret = -EINVAL;
+
+ /* This currently assumes a single port on the component. */
+ endpoint = of_graph_get_next_endpoint(node, NULL);
+ if (!endpoint) {
+ dev_err(&pdev->dev, "No endpoint found for %pOF\n", node);
+ goto err_destroy_ocs;
+ }
+
+ remote = of_graph_get_remote_endpoint(endpoint);
+ if (!remote) {
+ dev_err(&pdev->dev, "No remote endpoint node found for %pOF\n", endpoint);
+ goto err_destroy_ocs;
+ }
+
+ endpoint_prop = kzalloc(sizeof(*endpoint_prop), GFP_KERNEL);
+ if (!endpoint_prop)
+ goto err_destroy_ocs;
+
+ val = kzalloc(sizeof(*val), GFP_KERNEL);
+ if (!val)
+ goto err_destroy_ocs;
+
+ *val = cpu_to_be32(endpoint->phandle);
+ endpoint_prop->name = "remote-endpoint";
+ endpoint_prop->length = sizeof(*val);
+ endpoint_prop->value = val;
+
+ ret = of_changeset_update_property(ocs, node, endpoint_prop);
+ if (ret)
+ goto err_destroy_ocs;
+ }
+
+ ret = of_changeset_update_property(ocs, node, status_prop);
+ if (ret)
+ goto err_destroy_ocs;
+ ret = of_changeset_apply(ocs);
+ if (ret)
+ goto err_destroy_ocs;
+
+ of_node_put(node);
+
+ return 0;
+
+err_destroy_ocs:
+ of_node_put(remote);
+ of_node_put(endpoint);
+ kfree(val);
+ kfree(endpoint_prop);
+ of_changeset_destroy(ocs);
+err_free:
+ kfree(ocs);
+ kfree(status_prop);
+ of_node_put(node);
+ return ret;
+}
+
+static const struct cros_sku_option cros_krane_panel_options[] = {
+ { .sku_id_val = 0x00, .sku_id_mask = 0xf0, .compatible = "auo,kd101n80-45na" },
+ { .sku_id_val = 0xb0, .sku_id_mask = 0xf0, .compatible = "boe,tv101wum-nl6" },
+};
+
+static const struct cros_sku_component_data cros_krane_panel_data = {
+ .options = cros_krane_panel_options,
+ .num_options = ARRAY_SIZE(cros_krane_panel_options),
+};
+
static const struct hw_prober_entry hw_prober_platforms[] = {
{ .compatible = "google,hana", .prober = i2c_component_prober, .data = "touchscreen" },
{ .compatible = "google,hana", .prober = i2c_component_prober, .data = "trackpad" },
+ { .compatible = "google,krane", .prober = cros_sku_component_selector, .data = &cros_krane_panel_data },
};
static int hw_prober_probe(struct platform_device *pdev)
In cases where the same Chromebook model is manufactured with different components (MIPI DSI panels, MIPI CSI camera sensors, or trackpad / touchscreens with conflicting addresses), a different SKU ID is allocated to each specific combination. This SKU ID is exported by the bootloader into the device tree, and can be used to "discover" which combination is present on the current machine. This change adds a hardware prober that will match the SKU ID against a provided table, and enable the component for the matched entry based on the given compatible string. In the MIPI DSI panel and MIPI CSI camera sensor cases which have OF graphs, it will also update the remote endpoint to point to the enabled component. This assumes a single endpoint only. This will provide a path to reducing the number of Chromebook device trees. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> --- drivers/of/hw_prober.c | 160 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 160 insertions(+)