diff mbox series

[v5,1/2] dt-bindings: HID: i2c-hid: ilitek: Introduce bindings for Ilitek ili9882t

Message ID 20230609063615.758676-2-yangcong5@huaqin.corp-partner.google.com
State Superseded
Headers show
Series Add ili9882t bindings and timing | expand

Commit Message

cong yang June 9, 2023, 6:36 a.m. UTC
The ili9882t touch screen chip same as Elan eKTH6915 controller
has a reset gpio. The difference is that ili9882t needs to use
vccio-supply instead of vcc33-supply. Doug's series[1] allows panels
and touchscreens to power on/off together, let's add a phandle for this.

[1]: https://lore.kernel.org/r/20230607215224.2067679-1-dianders@chromium.org

Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com>
---
 .../bindings/input/ilitek,ili9882t.yaml       | 67 +++++++++++++++++++
 1 file changed, 67 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/ilitek,ili9882t.yaml

Comments

cong yang June 14, 2023, 11:02 a.m. UTC | #1
Hi,Krzysztof

On Sat, Jun 10, 2023 at 12:01 AM Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
>
> On 09/06/2023 08:36, Cong Yang wrote:
> > The ili9882t touch screen chip same as Elan eKTH6915 controller
> > has a reset gpio. The difference is that ili9882t needs to use
> > vccio-supply instead of vcc33-supply. Doug's series[1] allows panels
> > and touchscreens to power on/off together, let's add a phandle for this.
> >
> > [1]: https://lore.kernel.org/r/20230607215224.2067679-1-dianders@chromium.org
> >
> > Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com>
>
>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>
> If there is going to be new version, then:
> A nit, subject: drop second/last, redundant "bindings for". The
> "dt-bindings" prefix is already stating that these are bindings.

As Doug  said,makes sense to land if the panel follower patch series [1] lands.
If  Doug's series[1] land,  i will update this and commit message link in V6.

Thank you.
>
>
> ---
>
> This is an automated instruction, just in case, because many review tags
> are being ignored. If you do not know the process, here is a short
> explanation:
>
> Please add Acked-by/Reviewed-by/Tested-by tags when posting new
> versions, under or above your Signed-off-by tag. Tools like b4 can help
> here. However, there's no need to repost patches *only* to add the tags.
> The upstream maintainer will do that for acks received on the version
> they apply.
>
> https://elixir.bootlin.com/linux/v5.17/source/Documentation/process/submitting-patches.rst#L540
>
> Best regards,
> Krzysztof
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/input/ilitek,ili9882t.yaml b/Documentation/devicetree/bindings/input/ilitek,ili9882t.yaml
new file mode 100644
index 000000000000..c5d9e0e919f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/ilitek,ili9882t.yaml
@@ -0,0 +1,67 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/ilitek,ili9882t.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek ili9882t touchscreen controller
+
+maintainers:
+  - Cong Yang <yangcong5@huaqin.corp-partner.google.com>
+
+description:
+  Supports the Ilitek ili9882t touchscreen controller.
+  This touchscreen controller uses the i2c-hid protocol with a reset GPIO.
+
+allOf:
+  - $ref: /schemas/input/touchscreen/touchscreen.yaml#
+
+properties:
+  compatible:
+    const: ilitek,ili9882t
+
+  reg:
+    const: 0x41
+
+  interrupts:
+    maxItems: 1
+
+  panel: true
+
+  reset-gpios:
+    maxItems: 1
+    description: Reset GPIO.
+
+  vccio-supply:
+    description: The 1.8V supply to the touchscreen.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - panel
+  - vccio-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      touchscreen: touchscreen@41 {
+        compatible = "ilitek,ili9882t";
+        reg = <0x41>;
+
+        interrupt-parent = <&pio>;
+        interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+
+        panel = <&panel>;
+        reset-gpios = <&pio 60 GPIO_ACTIVE_LOW>;
+        vccio-supply = <&mt6366_vio18_reg>;
+      };
+    };