Message ID | 20230607144931.v2.10.Ia06c340e3482563e6bfd3106ecd0d3139f173ca4@changeid |
---|---|
State | Superseded |
Headers | show |
Series | drm/panel and i2c-hid: Allow panels and touchscreens to power sequence together | expand |
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi index 8b8ea8af165d..b4f328d3e1f6 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi @@ -104,6 +104,7 @@ ap_ts: touchscreen@5d { interrupt-parent = <&tlmm>; interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + panel = <&panel>; reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; vdd-supply = <&pp3300_ts>; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi index b3ba23a88a0b..88aeb415bd5b 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi @@ -116,6 +116,7 @@ ap_ts: touchscreen@14 { interrupt-parent = <&tlmm>; interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + panel = <&panel>; reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; vdd-supply = <&pp3300_touch>; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi index 269007d73162..c65f18ea3e5c 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi @@ -43,6 +43,7 @@ ap_ts: touchscreen@10 { interrupt-parent = <&tlmm>; interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + panel = <&panel>; post-power-on-delay-ms = <20>; hid-descr-addr = <0x0001>; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi index 6c5287bd27d6..d2aafd1ea672 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi @@ -102,6 +102,7 @@ ap_ts: touchscreen@10 { interrupt-parent = <&tlmm>; interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + panel = <&panel>; post-power-on-delay-ms = <20>; hid-descr-addr = <0x0001>; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi index 8e7b42f843d4..0785873d1345 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi @@ -99,6 +99,7 @@ ap_ts: touchscreen@10 { interrupt-parent = <&tlmm>; interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + panel = <&panel>; post-power-on-delay-ms = <20>; hid-descr-addr = <0x0001>; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi index 262d6691abd9..f70f5b42c845 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi @@ -154,6 +154,7 @@ ap_ts: touchscreen@1 { interrupt-parent = <&tlmm>; interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + panel = <&panel>; post-power-on-delay-ms = <70>; hid-descr-addr = <0x0001>;
Let's provide the proper link from the touchscreen to the panel on trogdor devices where the touchscreen support it. This allows the OS to power sequence the touchscreen more properly. For the most part, this is just expected to marginally improve power consumption while the screen is off. However, in at least one trogdor model (wormdingler) it's suspected that this will fix some behavorial corner cases when the panel power cycles (like for a modeset) without the touchscreen power cycling. NOTE: some trogdor variants use touchscreens that don't (yet) support linking the touchscreen and the panel. Those variants are left alone. Signed-off-by: Douglas Anderson <dianders@chromium.org> --- (no changes since v1) arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi | 1 + arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi | 1 + arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi | 1 + arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi | 1 + arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi | 1 + arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi | 1 + 6 files changed, 6 insertions(+)