diff mbox series

[v2,5/9] Input: iqs5xx - close bootloader using hardware reset

Message ID 20210313191236.4366-6-jeff@labundy.com
State Accepted
Commit d72e55f7c09df9719da6ac60e885889c389b0b2c
Headers show
Series Input: iqs5xx - more enhancements and optimizations | expand

Commit Message

Jeff LaBundy March 13, 2021, 7:12 p.m. UTC 
The bootloader can be closed using the 'execute' command (0x02) or
hardware reset. Rather than using the former option for successful
firmware update procedures and reserving the latter for recovering
the device upon failure, simply use hardware reset for all cases.

The post-bootloader initialization delay increases marginally when
triggered by a hardware reset, so increase the wait time to ensure
the device does not subsequently fail to respond.

As part of this change, refactor the return path to avoid an extra
assignment and to make the logic a bit smaller.

Signed-off-by: Jeff LaBundy <jeff@labundy.com>
---
Changes in v2:
 - None

 drivers/input/touchscreen/iqs5xx.c | 24 +++++++-----------------
 1 file changed, 7 insertions(+), 17 deletions(-)

--
2.17.1

Comments

Dmitry Torokhov March 22, 2021, 4:04 a.m. UTC | #1 
On Sat, Mar 13, 2021 at 01:12:32PM -0600, Jeff LaBundy wrote:
> The bootloader can be closed using the 'execute' command (0x02) or
> hardware reset. Rather than using the former option for successful
> firmware update procedures and reserving the latter for recovering
> the device upon failure, simply use hardware reset for all cases.
> 
> The post-bootloader initialization delay increases marginally when
> triggered by a hardware reset, so increase the wait time to ensure
> the device does not subsequently fail to respond.
> 
> As part of this change, refactor the return path to avoid an extra
> assignment and to make the logic a bit smaller.
> 
> Signed-off-by: Jeff LaBundy <jeff@labundy.com>

Applied, thank you.
diff mbox series

Patch

diff --git a/drivers/input/touchscreen/iqs5xx.c b/drivers/input/touchscreen/iqs5xx.c
index 0920516124c7..a990c176abf7 100644
--- a/drivers/input/touchscreen/iqs5xx.c
+++ b/drivers/input/touchscreen/iqs5xx.c
@@ -832,7 +832,7 @@  static int iqs5xx_fw_file_parse(struct i2c_client *client,
 static int iqs5xx_fw_file_write(struct i2c_client *client, const char *fw_file)
 {
 	struct iqs5xx_private *iqs5xx = i2c_get_clientdata(client);
-	int error, error_bl = 0;
+	int error, error_init = 0;
 	u8 *pmap;

 	if (iqs5xx->dev_id_info.bl_status == IQS5XX_BL_STATUS_NONE)
@@ -875,21 +875,14 @@  static int iqs5xx_fw_file_write(struct i2c_client *client, const char *fw_file)
 	error = iqs5xx_bl_verify(client, IQS5XX_CSTM,
 				 pmap + IQS5XX_CHKSM_LEN + IQS5XX_APP_LEN,
 				 IQS5XX_CSTM_LEN);
-	if (error)
-		goto err_reset;
-
-	error = iqs5xx_bl_cmd(client, IQS5XX_BL_CMD_EXEC, 0);

 err_reset:
-	if (error) {
-		iqs5xx_reset(client);
-		usleep_range(10000, 10100);
-	}
+	iqs5xx_reset(client);
+	usleep_range(15000, 15100);

-	error_bl = error;
-	error = iqs5xx_dev_init(client);
-	if (!error && !iqs5xx->dev_id_info.bl_status)
-		error = -EINVAL;
+	error_init = iqs5xx_dev_init(client);
+	if (!iqs5xx->dev_id_info.bl_status)
+		error_init = error_init ? : -EINVAL;

 	enable_irq(client->irq);

@@ -898,10 +891,7 @@  static int iqs5xx_fw_file_write(struct i2c_client *client, const char *fw_file)
 err_kfree:
 	kfree(pmap);

-	if (error_bl)
-		return error_bl;
-
-	return error;
+	return error ? : error_init;
 }

 static ssize_t fw_file_store(struct device *dev,