| Message ID | 20210218064435.1360483-1-joe_hung@ilitek.com |
|---|---|
| State | New |
| Headers | show |
| Series | [v3,1/2] dt-bindings: input: touchscreen: ilitek_ts_i2c: Add bindings | expand |
Hi Joe, On Thu, Feb 18, 2021 at 02:44:34PM +0800, Joe Hung wrote: > Add binding documentation for ILITEK touch devices. > > Signed-off-by: Joe Hung <joe_hung@ilitek.com> > --- > Changes in v3: > - Add include header in examples, and pass the dt binding check > > Changes in v2: > - Convert to DT schema format > - Using interrupts instead of irq-gpios > > .../input/touchscreen/ilitek_ts_i2c.yaml | 46 +++++++++++++++++++ > 1 file changed, 46 insertions(+) > create mode 100644 Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml > > diff --git a/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml b/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml > new file mode 100644 > index 000000000000..5da9020ed272 > --- /dev/null > +++ b/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml > @@ -0,0 +1,46 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/input/touchscreen/ilitek_ts_i2c.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Ilitek I2C Touchscreen Controller > + > +maintainers: > + - Dmitry Torokhov <dmitry.torokhov@gmail.com> > + > +properties: > + compatible: > + enum: > + - ilitek,ili2520 > + - ilitek,ili2510 > + reg: > + const: 0x41 > + interrupts: > + maxItems: 1 > + reset-gpios: > + maxItems: 1 > + > +additionalProperties: false I think you need to make sure that wakeup-source and various touchscreen-* properties can be used in this binding. > + > +required: > + - compatible > + - reg > + - interrupts > + - reset-gpios > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/irq.h> > + #include <dt-bindings/gpio/gpio.h> > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + touchscreen@41 { > + compatible = "ilitek,ili2520"; > + reg = <0x41>; > + interrupt-parent = <&gpio1>; > + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; > + reset-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; > + }; > + }; > -- > 2.25.1 > > Thanks.
Hi Dmitry, Many thanks for your review. Should be updated in v4 shortly. On Sat, Feb 20, 2021 21:03:29PM -0800, Dmitry Torokhov wrote: > Hi Joe, > > On Thu, Feb 18, 2021 at 02:44:34PM +0800, Joe Hung wrote: > > Add binding documentation for ILITEK touch devices. > > > > Signed-off-by: Joe Hung <joe_hung@ilitek.com> > > --- > > Changes in v3: > > - Add include header in examples, and pass the dt binding check > > > > Changes in v2: > > - Convert to DT schema format > > - Using interrupts instead of irq-gpios > > > > .../input/touchscreen/ilitek_ts_i2c.yaml | 46 +++++++++++++++++++ > > 1 file changed, 46 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml > > > > diff --git a/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml b/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml > > new file mode 100644 > > index 000000000000..5da9020ed272 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml > > @@ -0,0 +1,46 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/input/touchscreen/ilitek_ts_i2c.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Ilitek I2C Touchscreen Controller > > + > > +maintainers: > > + - Dmitry Torokhov <dmitry.torokhov@gmail.com> > > + > > +properties: > > + compatible: > > + enum: > > + - ilitek,ili2520 > > + - ilitek,ili2510 > > + reg: > > + const: 0x41 > > + interrupts: > > + maxItems: 1 > > + reset-gpios: > > + maxItems: 1 > > + > > +additionalProperties: false > > I think you need to make sure that wakeup-source and various > touchscreen-* properties can be used in this binding. > > > + > > +required: > > + - compatible > > + - reg > > + - interrupts > > + - reset-gpios > > + > > +examples: > > + - | > > + #include <dt-bindings/interrupt-controller/irq.h> > > + #include <dt-bindings/gpio/gpio.h> > > + i2c { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + touchscreen@41 { > > + compatible = "ilitek,ili2520"; > > + reg = <0x41>; > > + interrupt-parent = <&gpio1>; > > + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; > > + reset-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; > > + }; > > + }; > > -- > > 2.25.1 > > > > > > Thanks. > > -- > Dmitry Many thanks. -- Joe Hung
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml b/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml new file mode 100644 index 000000000000..5da9020ed272 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/ilitek_ts_i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ilitek I2C Touchscreen Controller + +maintainers: + - Dmitry Torokhov <dmitry.torokhov@gmail.com> + +properties: + compatible: + enum: + - ilitek,ili2520 + - ilitek,ili2510 + reg: + const: 0x41 + interrupts: + maxItems: 1 + reset-gpios: + maxItems: 1 + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - reset-gpios + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + touchscreen@41 { + compatible = "ilitek,ili2520"; + reg = <0x41>; + interrupt-parent = <&gpio1>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + }; + };
Add binding documentation for ILITEK touch devices. Signed-off-by: Joe Hung <joe_hung@ilitek.com> --- Changes in v3: - Add include header in examples, and pass the dt binding check Changes in v2: - Convert to DT schema format - Using interrupts instead of irq-gpios .../input/touchscreen/ilitek_ts_i2c.yaml | 46 +++++++++++++++++++ 1 file changed, 46 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml -- 2.25.1