mbox series

[0/6] Small fixes to the cyttsp5 touchscreen driver

Message ID 20230323135205.1160879-1-mweigand@mweigand.net
Headers show
Series Small fixes to the cyttsp5 touchscreen driver | expand

Message

Maximilian Weigand March 23, 2023, 1:51 p.m. UTC 
While working on some intermittent module-loading problems of the
cyttsp5 module on the Pine64 PineNote it was found that the device tree
example of the cypress,tt21000 was in error regarding the interrupt
type (IRQ_TYPE_EDGE_FALLING should be used instead of IRQ_TYPE_LEVEL_LOW).

This lead to the proper implementation of device sleep states, which is
required to ensure proper functioning of the touchscreen after resume
when the correct interrupt type IRQ_TYPE_FALLING_EDGE is used. Sleep and
wakeup commands to the touchscreen were derived from the GPL-2 android
driver by Cypress Semiconductor (copyright note for Cypress
Semiconductor is already in the current driver).

The first two patches fix small issues with the code found during
development of the suspend functionality.


Maximilian Weigand (6):
  Input: cyttsp5: fix array length
  Input: cyttsp5: remove unused code
  devicetree: input: cypress,tt21000: fix interrupt type in dts example
  Input: cyttsp5: properly initialize the device as a pm wakeup device
  devicetree: input: cypress,tt21000: add wakeup-source entry to
    documentation
  Input: cyttsp5: implement proper sleep and wakeup procedures

 .../input/touchscreen/cypress,tt21000.yaml    |   4 +-
 drivers/input/touchscreen/cyttsp5.c           | 138 +++++++++++++++++-
 2 files changed, 136 insertions(+), 6 deletions(-)

--
2.39.2