| Message ID | 20220712163345.445811-1-francesco.dolcini@toradex.com |
|---|---|
| Headers | show |
| Series | mfd: stmpe: Probe sub-function by compatible | expand |
Hello Lee, thanks for picking up patches 1 and 2. What about the others, should you pick also those? 3 and 4 do have all the required acks, I'm not sure about 5 however that has the ack only from Krzysztof. Francesco On Tue, Jul 12, 2022 at 06:33:40PM +0200, Francesco Dolcini wrote: > Hi all, > This series update the STMPE MFD driver to use of_compatible to probe for > sub-functions instead of using hardcoded names. Matching by name does not seems > in general a good idea, in this specific case it is even worst since the node > name are not compliant to the current naming convention (they are not generic > and they do include underscores), and because of that recently > we had a regression introduced [1].
On Tue, 09 Aug 2022, Francesco Dolcini wrote: > Hello Lee, > thanks for picking up patches 1 and 2. What about the others, should you > pick also those? 3 and 4 do have all the required acks, I'm not sure > about 5 however that has the ack only from Krzysztof. They need to go in via their own subsystems. We only filter in patches from other areas if there are build deps.
Hi all, This series update the STMPE MFD driver to use of_compatible to probe for sub-functions instead of using hardcoded names. Matching by name does not seems in general a good idea, in this specific case it is even worst since the node name are not compliant to the current naming convention (they are not generic and they do include underscores), and because of that recently we had a regression introduced [1]. This change was suggested by Ahmad Fatoum [2]. [1] commit 56086b5e ("ARM: dts: imx6qdl-apalis: Avoid underscore in node name") [2] https://lore.kernel.org/all/86815346-209e-304e-3565-b4160afa48e8@pengutronix.de/ Changes in v2: - split in a separate patch the removal of rotator from probe - remove define usage for compatible strings Francesco Dolcini (5): mfd: stmpe: Remove rotator block from probe mfd: stmpe: Probe sub-function by compatible dt-bindings: gpio: stmpe: Remove node name requirement dt-bindings: iio: adc: stmpe: Remove node name requirement dt-bindings: input: touchscreen: stmpe: Remove node name requirement .../devicetree/bindings/gpio/gpio-stmpe.txt | 3 +-- .../devicetree/bindings/iio/adc/st,stmpe-adc.yaml | 3 +-- .../devicetree/bindings/input/touchscreen/stmpe.txt | 3 +-- drivers/mfd/stmpe.c | 13 +++++-------- 4 files changed, 8 insertions(+), 14 deletions(-)