mbox series

[v5,0/2] Add support for Imagis touchscreens

Message ID 20220216134302.5153-1-markuss.broks@gmail.com
Headers show
Series Add support for Imagis touchscreens | expand

Message

Markuss Broks Feb. 16, 2022, 1:42 p.m. UTC 
Add support for Imagis touchscreens, used on various mobile
devices such as Samsung Galaxy J5 (2015), J3 (2015), J5 (2016).

v2: rebase on top of the correct tree
v3:
- prefix all defines as IST3038C
- use two tabs for all defines
- add missing <linux/regulator/consumer.h> header
- drop ADDR_LEN and DATA_LEN defines; use sizeof(reg_be) instead
- use __be32 type for reg_be
- add a comment about i2c read not being successful on first try
- use "ret" instead of "res" in read_reg function
- don't use the internal __cpu_to_be32 function, use cpu_to_be32 instead
- use "error" instead of "ret" in interrupt handler
- pass the slot state directly, without ternary operator
- drop the dev_err in init_input_dev function
- reorder the functions in _probe so that the chipid command is read as fast 
as possible
- don't use imagis_start in probe
- initialize the irq after the chip is powered
- save the return value in imagis_resume
- drop WIDTH_MAJOR since only TOUCH_MAJOR is reported
- the "chip detected" message is now dev_dbg
- reorder headers so they are in alphabetic order
- use GENMASK to generate masks for getting the X and Y coordinates and touch area
- drop *_pressure from device tree bindings since the driver doesn't
support reporting pressure
- fix the typo with i2c address in device treee bindings (48 instead of 50)
- add IRQF_NO_AUTOEN flag to avoid unbalanced irq enable
v4:
- alphabetically order MAINTAINERS entry
- alphabetically order Kconfig and Makefile
- drop the error message in init_regulators
- disable regulators on probe error
- drop IRQF_TRIGGER_FALLING
- @ is not optional (device tree bindings)
- don't use items for compatible
- add maxItems property to reg, drop the comment
v5:
- compatible enum is not an item of the list, drop "-"

Markuss Broks (2):
  dt-bindings: input/touchscreen: bindings for Imagis
  Input: add Imagis touchscreen driver

 .../input/touchscreen/imagis,ist3038c.yaml    |  78 +++++
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 MAINTAINERS                                   |   6 +
 drivers/input/touchscreen/Kconfig             |  10 +
 drivers/input/touchscreen/Makefile            |   1 +
 drivers/input/touchscreen/imagis.c            | 329 ++++++++++++++++++
 6 files changed, 426 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml
 create mode 100644 drivers/input/touchscreen/imagis.c