@@ -264,7 +264,6 @@ struct i801_mux_config {
char *gpio_chip;
unsigned values[3];
int n_values;
- unsigned classes[3];
unsigned gpios[2]; /* Relative to gpio_chip->base */
int n_gpios;
};
@@ -1315,7 +1314,6 @@ static struct i801_mux_config i801_mux_config_asus_z8_d12 = {
.gpio_chip = "gpio_ich",
.values = { 0x02, 0x03 },
.n_values = 2,
- .classes = { I2C_CLASS_SPD, I2C_CLASS_SPD },
.gpios = { 52, 53 },
.n_gpios = 2,
};
@@ -1324,7 +1322,6 @@ static struct i801_mux_config i801_mux_config_asus_z8_d18 = {
.gpio_chip = "gpio_ich",
.values = { 0x02, 0x03, 0x01 },
.n_values = 3,
- .classes = { I2C_CLASS_SPD, I2C_CLASS_SPD, I2C_CLASS_SPD },
.gpios = { 52, 53 },
.n_gpios = 2,
};
@@ -1434,7 +1431,6 @@ static void i801_add_mux(struct i801_priv *priv)
gpio_data.parent = priv->adapter.nr;
gpio_data.values = mux_config->values;
gpio_data.n_values = mux_config->n_values;
- gpio_data.classes = mux_config->classes;
gpio_data.idle = I2C_MUX_GPIO_NO_IDLE;
/* Register GPIO descriptor lookup table */
Only remaining client driver supporting I2C_CLASS_SPD is jc42. This type of thermal sensor can be found on several DDR3/DDR4 modules. i2c_register_spd() instantiates also such thermal sensor i2c devices. Since 71b494e043d2 ("i2c: i801: Call i2c_register_spd for muxed child segments") i2c_register_spd() is called also for the remaining use case, systems with muxed SMBUS segments for SPD EEPROMs. Therefore I2C_CLASS_SPD class-based instantiation isn't needed any longer in this driver, so remove it. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> --- drivers/i2c/busses/i2c-i801.c | 4 ---- 1 file changed, 4 deletions(-)