diff mbox series

[v4,1/2] i2c-mlxbf: Add repeated start condition support

Message ID 20250506193059.321345-1-cbabroski@nvidia.com
State New
Headers show
Series [v4,1/2] i2c-mlxbf: Add repeated start condition support | expand

Commit Message

Chris Babroski May 6, 2025, 7:30 p.m. UTC 
Add support for SMBus repeated start conditions to the Mellanox I2C
driver. This support is specifically enabled for the
I2C_FUNC_SMBUS_WRITE_I2C_BLOCK implementation which is required for
communication with a specific I2C device on BlueField 3.

Signed-off-by: Chris Babroski <cbabroski@nvidia.com>
Reviewed-by: Asmaa Mnebhi <asmaa@nvidia.com>
Reviewed-by: Khalil Blaiech <kblaiech@nvidia.com>
---
 V3 -> V4: Split changes into two separate logical patches
 V2 -> V3: Cleaned up code and address review comments
 V1 -> V2: Removed default "Reviewed-by:" tags

 drivers/i2c/busses/i2c-mlxbf.c | 34 ++++++++++++++++++++++++++--------
 1 file changed, 26 insertions(+), 8 deletions(-)


base-commit: 0a9b9d17f3a781dea03baca01c835deaa07f7cc3
diff mbox series

Patch

diff --git a/drivers/i2c/busses/i2c-mlxbf.c b/drivers/i2c/busses/i2c-mlxbf.c
index b3a73921ab69..0f5b6a00c1b6 100644
--- a/drivers/i2c/busses/i2c-mlxbf.c
+++ b/drivers/i2c/busses/i2c-mlxbf.c
@@ -222,7 +222,7 @@ 
 
 #define MLXBF_I2C_MASTER_ENABLE \
 	(MLXBF_I2C_MASTER_LOCK_BIT | MLXBF_I2C_MASTER_BUSY_BIT | \
-	 MLXBF_I2C_MASTER_START_BIT | MLXBF_I2C_MASTER_STOP_BIT)
+	 MLXBF_I2C_MASTER_START_BIT)
 
 #define MLXBF_I2C_MASTER_ENABLE_WRITE \
 	(MLXBF_I2C_MASTER_ENABLE | MLXBF_I2C_MASTER_CTL_WRITE_BIT)
@@ -336,6 +336,7 @@  enum {
 	MLXBF_I2C_F_SMBUS_BLOCK = BIT(5),
 	MLXBF_I2C_F_SMBUS_PEC = BIT(6),
 	MLXBF_I2C_F_SMBUS_PROCESS_CALL = BIT(7),
+	MLXBF_I2C_F_WRITE_WITHOUT_STOP = BIT(8),
 };
 
 /* Mellanox BlueField chip type. */
@@ -694,16 +695,19 @@  static void mlxbf_i2c_smbus_read_data(struct mlxbf_i2c_priv *priv,
 }
 
 static int mlxbf_i2c_smbus_enable(struct mlxbf_i2c_priv *priv, u8 slave,
-				  u8 len, u8 block_en, u8 pec_en, bool read)
+				  u8 len, u8 block_en, u8 pec_en, bool read,
+				  bool stop)
 {
-	u32 command;
+	u32 command = 0;
 
 	/* Set Master GW control word. */
+	if (stop)
+		command |= MLXBF_I2C_MASTER_STOP_BIT;
 	if (read) {
-		command = MLXBF_I2C_MASTER_ENABLE_READ;
+		command |= MLXBF_I2C_MASTER_ENABLE_READ;
 		command |= rol32(len, MLXBF_I2C_MASTER_READ_SHIFT);
 	} else {
-		command = MLXBF_I2C_MASTER_ENABLE_WRITE;
+		command |= MLXBF_I2C_MASTER_ENABLE_WRITE;
 		command |= rol32(len, MLXBF_I2C_MASTER_WRITE_SHIFT);
 	}
 	command |= rol32(slave, MLXBF_I2C_MASTER_SLV_ADDR_SHIFT);
@@ -738,9 +742,11 @@  mlxbf_i2c_smbus_start_transaction(struct mlxbf_i2c_priv *priv,
 	u8 op_idx, data_idx, data_len, write_len, read_len;
 	struct mlxbf_i2c_smbus_operation *operation;
 	u8 read_en, write_en, block_en, pec_en;
-	u8 slave, flags, addr;
+	bool stop_after_write = true;
+	u8 slave, addr;
 	u8 *read_buf;
 	int ret = 0;
+	u32 flags;
 
 	if (request->operation_cnt > MLXBF_I2C_SMBUS_MAX_OP_CNT)
 		return -EINVAL;
@@ -799,7 +805,16 @@  mlxbf_i2c_smbus_start_transaction(struct mlxbf_i2c_priv *priv,
 			memcpy(data_desc + data_idx,
 			       operation->buffer, operation->length);
 			data_idx += operation->length;
+
+			/*
+			 * The stop condition can be skipped when writing on the bus
+			 * to implement a repeated start condition on the next read
+			 * as required for several SMBus and I2C operations.
+			 */
+			if (flags & MLXBF_I2C_F_WRITE_WITHOUT_STOP)
+				stop_after_write = false;
 		}
+
 		/*
 		 * We assume that read operations are performed only once per
 		 * SMBus transaction. *TBD* protect this statement so it won't
@@ -825,7 +840,7 @@  mlxbf_i2c_smbus_start_transaction(struct mlxbf_i2c_priv *priv,
 
 	if (write_en) {
 		ret = mlxbf_i2c_smbus_enable(priv, slave, write_len, block_en,
-					 pec_en, 0);
+					 pec_en, 0, stop_after_write);
 		if (ret)
 			goto out_unlock;
 	}
@@ -835,7 +850,7 @@  mlxbf_i2c_smbus_start_transaction(struct mlxbf_i2c_priv *priv,
 		mlxbf_i2c_smbus_write_data(priv, (const u8 *)&addr, 1,
 					   MLXBF_I2C_MASTER_DATA_DESC_ADDR, true);
 		ret = mlxbf_i2c_smbus_enable(priv, slave, read_len, block_en,
-					 pec_en, 1);
+					 pec_en, 1, true);
 		if (!ret) {
 			/* Get Master GW data descriptor. */
 			mlxbf_i2c_smbus_read_data(priv, data_desc, read_len + 1,
@@ -940,6 +955,9 @@  mlxbf_i2c_smbus_i2c_block_func(struct mlxbf_i2c_smbus_request *request,
 	request->operation[0].flags |= pec_check ? MLXBF_I2C_F_SMBUS_PEC : 0;
 	request->operation[0].buffer = command;
 
+	if (read)
+		request->operation[0].flags |= MLXBF_I2C_F_WRITE_WITHOUT_STOP;
+
 	/*
 	 * As specified in the standard, the max number of bytes to read/write
 	 * per block operation is 32 bytes. In Golan code, the controller can