From patchwork Fri Nov 8 15:37:01 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Romain Gantois X-Patchwork-Id: 842210 Received: from relay7-d.mail.gandi.net (relay7-d.mail.gandi.net [217.70.183.200]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id AEC4D21FDB8; Fri, 8 Nov 2024 15:37:18 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=217.70.183.200 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1731080242; cv=none; b=a8zvgdFcE3c98Y0dQY4nRwxKCzlEIkuYFXjkGuVR/3cwVRDTirf2gRQ/NDoDsyo1tuQLuHl3p25pKZeo+RzG+4tqasWb8OD5VZCMG3the35H61YOrHl0tKJk8v3qm/IHVyGEWyfsIeRAAPtp5nRtzhU0UiyPEI0qC8g+Tm6NNlw= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1731080242; c=relaxed/simple; bh=bqjbWQ1YgYFo5XPwkfcZQFKSUv7FMPnxtsWEX14HuYs=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=Ial3zidhKppzYDXJ0ks3LX+BvVNqx5jyAryrbm9rW4qAC/+20iu5C5vC4HSKhCP6fZmEeGPcLLSE8+f9D/lGdo2uPjUSIfK2mUoTgwwKhN6RSScLUC1SibAWbYQIjOowkDI+HCaFOW4SshMg/iXidht4Sv55Y66vvxgufqvQ2Zs= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=bootlin.com; spf=pass smtp.mailfrom=bootlin.com; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b=hyfKMd6T; arc=none smtp.client-ip=217.70.183.200 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=bootlin.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=bootlin.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b="hyfKMd6T" Received: by mail.gandi.net (Postfix) with ESMTPSA id 502822000E; Fri, 8 Nov 2024 15:37:16 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1731080237; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version:content-type:content-type: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=pDGach98zHjQAfoDF7HC5mrbNv25j0XWgV1miw+ObeU=; b=hyfKMd6TGViNzXwhaKa3ub1scjR/2rLwlZhN5Ga4FiHqpXhjRIuCF272D64kR5iod7npji UVoPlqJFTMusT0n33A2AeQXC0K95dTGk2vsTidUAAR6GdgzcF4GZQNqr3E3PK5ms4dtOAs eDkPoFYajJpwosBstaQU8tR8YgG3MvPDU2n/Q51LVA9Jpfu7SJYv5jQ9/TLeEVm4miiC+8 qvvL6CvTwXhT6PpkAhQoojRNoRWmWYlB9kDK1a3c6LSi5JxsFiTBBBokAGLHlGoqblHjIh 8+RPal9wtMXNdBBdGWuXnj0dccn1zQwHVMbMzr1fhtIxQCwC/iFFyLZwELQw9w== From: Romain Gantois Date: Fri, 08 Nov 2024 16:37:01 +0100 Subject: [PATCH 9/9] misc: add FPC202 dual port controller driver Precedence: bulk X-Mailing-List: linux-i2c@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20241108-fpc202-v1-9-fe42c698bc92@bootlin.com> References: <20241108-fpc202-v1-0-fe42c698bc92@bootlin.com> In-Reply-To: <20241108-fpc202-v1-0-fe42c698bc92@bootlin.com> To: Wolfram Sang , Tomi Valkeinen , Luca Ceresoli , Andi Shyti , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Derek Kiernan , Dragan Cvetic , Arnd Bergmann , Greg Kroah-Hartman , Mauro Carvalho Chehab Cc: Thomas Petazzoni , Kory Maincent , linux-i2c@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-media@vger.kernel.org, Romain Gantois X-Mailer: b4 0.14.2 X-GND-Sasl: romain.gantois@bootlin.com The TI FPC202 dual port controller serves as a low- speed signal aggregator for common port types such as SFP, QSFP, Mini-SAS HD, and others. It aggregates GPIO and I2C signals across two downstream ports, acting as both a GPIO controller and an I2C address translator for up to two logical devices per port. Signed-off-by: Romain Gantois --- MAINTAINERS | 7 + drivers/misc/Kconfig | 11 ++ drivers/misc/Makefile | 1 + drivers/misc/ti_fpc202.c | 421 +++++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 440 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index c27f3190737f8b85779bde5489639c8b899f4fd8..4e686d6652f0395f4f2baf1e598aa6023a255a25 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -23223,6 +23223,13 @@ F: drivers/misc/tifm* F: drivers/mmc/host/tifm_sd.c F: include/linux/tifm.h +TI FPC202 DUAL PORT CONTROLLER +M: Romain Gantois +L: linux-kernel@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/misc/ti,fpc202.yaml +F: drivers/misc/ti_fpc202.c + TI FPD-LINK DRIVERS M: Tomi Valkeinen L: linux-media@vger.kernel.org diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 3fe7e2a9bd294da562cf553d958772dcb49bbc89..2549989422c5b1a67a886290efcd692c0835c7e1 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -114,6 +114,17 @@ config RPMB If unsure, select N. +config TI_FPC202 + tristate "TI FPC202 Dual Port Controller" + select GPIOLIB + depends on I2C_ATR + help + If you say yes here you get support for the Texas Instruments FPC202 + Dual Port Controller. + + This driver can also be built as a module. If so, the module will be + called fpc202. + config TIFM_CORE tristate "TI Flash Media interface support" depends on PCI diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index a9f94525e1819d5d7eed4937ce1d50b2875ee71b..d0b7a1b96619b3125d1455d40268040e0764b341 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_ATMEL_SSC) += atmel-ssc.o obj-$(CONFIG_DUMMY_IRQ) += dummy-irq.o obj-$(CONFIG_ICS932S401) += ics932s401.o obj-$(CONFIG_LKDTM) += lkdtm/ +obj-$(CONFIG_TI_FPC202) += ti_fpc202.o obj-$(CONFIG_TIFM_CORE) += tifm_core.o obj-$(CONFIG_TIFM_7XX1) += tifm_7xx1.o obj-$(CONFIG_PHANTOM) += phantom.o diff --git a/drivers/misc/ti_fpc202.c b/drivers/misc/ti_fpc202.c new file mode 100644 index 0000000000000000000000000000000000000000..c2a720e10fa1391da43f469efb5f7ccd49320d44 --- /dev/null +++ b/drivers/misc/ti_fpc202.c @@ -0,0 +1,421 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * ti_fpc202.c - FPC202 Dual Port Controller driver + * + * Copyright (C) 2024 Bootlin + * + */ + +#include +#include +#include +#include +#include +#include + +#define FPC202_ALIASES_PER_PORT 2 + +/* + * GPIO: port mapping + * + * 0: P0_S0_IN_A + * 1: P0_S1_IN_A + * 2: P1_S0_IN_A + * 3: P1_S1_IN_A + * 4: P0_S0_IN_B + * ... + * 8: P0_S0_IN_C + * ... + * 12: P0_S0_OUT_A + * ... + * 16: P0_S0_OUT_B + * ... + * 19: P1_S1_OUT_B + * + */ + +#define FPC202_GPIO_COUNT 20 +#define FPC202_GPIO_P0_S0_IN_B 4 +#define FPC202_GPIO_P0_S0_OUT_A 12 + +#define FPC202_REG_IN_A_INT 0x6 +#define FPC202_REG_IN_C_IN_B 0x7 +#define FPC202_REG_OUT_A_OUT_B 0x8 + +#define FPC202_REG_OUT_A_OUT_B_VAL 0xa + +#define FPC202_REG_MOD_DEV(port, dev) (0xb4 + ((port) * 4) + (dev)) +#define FPC202_REG_AUX_DEV(port, dev) (0xb6 + ((port) * 4) + (dev)) + +/* + * The FPC202 doesn't support turning off address translation on a single port. + * So just set an invalid I2C address as the translation target when no client + * address is attached. + */ +#define FPC202_REG_DEV_INVALID 0 + +/* Even aliases are assigned to device 0 and odd aliases to device 1 */ +#define fpc202_dev_num_from_alias(alias) ((alias) % 2) + +struct fpc202_priv { + struct i2c_client *client; + struct i2c_atr *atr; + struct gpio_desc *en_gpio; + struct gpio_chip gpio; + + /* Lock REG_MOD/AUX_DEV and addr_caches during attach/detach */ + struct mutex reg_dev_lock; + + /* Cached device addresses for both ports and their devices */ + u8 addr_caches[2][2]; +}; + +static void fpc202_fill_alias_table(struct i2c_client *client, u16 *aliases, int port_id) +{ + u16 first_alias; + int i; + + /* + * There is a predefined list of aliases for each FPC202 I2C + * self-address. This allows daisy-chained FPC202 units to + * automatically take on different sets of aliases. + * Each port of an FPC202 unit is assigned two aliases from this list. + */ + first_alias = 0x10 + 4 * port_id + 8 * ((u16)client->addr - 2); + + for (i = 0; i < FPC202_ALIASES_PER_PORT; i++) + aliases[i] = first_alias + i; +} + +static int fpc202_gpio_get_dir(int offset) +{ + return offset < FPC202_GPIO_P0_S0_OUT_A ? GPIO_LINE_DIRECTION_IN : GPIO_LINE_DIRECTION_OUT; +} + +static int fpc202_read(struct fpc202_priv *priv, u8 reg) +{ + int val; + + val = i2c_smbus_read_byte_data(priv->client, reg); + return val; +} + +static int fpc202_write(struct fpc202_priv *priv, u8 reg, u8 value) +{ + return i2c_smbus_write_byte_data(priv->client, reg, value); +} + +static void fpc202_set_enable(struct fpc202_priv *priv, int enable) +{ + if (!priv->en_gpio) + return; + + gpiod_set_value(priv->en_gpio, enable); +} + +static void fpc202_gpio_set(struct gpio_chip *chip, unsigned int offset, + int value) +{ + struct fpc202_priv *priv = gpiochip_get_data(chip); + int ret; + u8 val; + + if (fpc202_gpio_get_dir(offset) == GPIO_LINE_DIRECTION_IN) + return; + + ret = fpc202_read(priv, FPC202_REG_OUT_A_OUT_B_VAL); + if (ret < 0) { + dev_err(&priv->client->dev, "Failed to set GPIO %d value! err %d\n", offset, ret); + return; + } + + val = (u8)ret; + + if (value) + val |= BIT(offset - FPC202_GPIO_P0_S0_OUT_A); + else + val &= ~BIT(offset - FPC202_GPIO_P0_S0_OUT_A); + + fpc202_write(priv, FPC202_REG_OUT_A_OUT_B_VAL, val); +} + +static int fpc202_gpio_get(struct gpio_chip *chip, unsigned int offset) +{ + struct fpc202_priv *priv = gpiochip_get_data(chip); + u8 reg, bit; + int ret; + + if (offset < FPC202_GPIO_P0_S0_IN_B) { + reg = FPC202_REG_IN_A_INT; + bit = BIT(4 + offset); + } else if (offset < FPC202_GPIO_P0_S0_OUT_A) { + reg = FPC202_REG_IN_C_IN_B; + bit = BIT(offset - FPC202_GPIO_P0_S0_IN_B); + } else { + reg = FPC202_REG_OUT_A_OUT_B_VAL; + bit = BIT(offset - FPC202_GPIO_P0_S0_OUT_A); + } + + ret = fpc202_read(priv, reg); + if (ret < 0) + return ret; + + return !!(((u8)ret) & bit); +} + +static int fpc202_gpio_direction_input(struct gpio_chip *chip, unsigned int offset) +{ + if (fpc202_gpio_get_dir(offset) == GPIO_LINE_DIRECTION_OUT) + return -EINVAL; + + return 0; +} + +static int fpc202_gpio_direction_output(struct gpio_chip *chip, unsigned int offset, + int value) +{ + struct fpc202_priv *priv = gpiochip_get_data(chip); + int ret; + u8 val; + + if (fpc202_gpio_get_dir(offset) == GPIO_LINE_DIRECTION_IN) + return -EINVAL; + + fpc202_gpio_set(chip, offset, value); + + ret = fpc202_read(priv, FPC202_REG_OUT_A_OUT_B); + if (ret < 0) + return ret; + + val = (u8)ret | BIT(offset - FPC202_GPIO_P0_S0_OUT_A); + + return fpc202_write(priv, FPC202_REG_OUT_A_OUT_B, val); +} + +/* + * Set the translation table entry associated with a port and device number. + * + * Each downstream port of the FPC202 has two fixed aliases corresponding to + * device numbers 0 and 1. If one of these aliases is found in an incoming I2C + * transfer, it will be translated to the address given by the corresponding + * translation table entry. + */ +static int fpc202_write_dev_addr(struct fpc202_priv *priv, u32 port_id, int dev_num, u16 addr) +{ + int ret, reg_mod, reg_aux; + u8 val; + + mutex_lock(&priv->reg_dev_lock); + + reg_mod = FPC202_REG_MOD_DEV(port_id, dev_num); + reg_aux = FPC202_REG_AUX_DEV(port_id, dev_num); + val = addr & 0x7f; + + ret = fpc202_write(priv, reg_mod, val); + if (ret) + goto out_unlock; + + /* + * The FPC202 datasheet is unclear about the role of the AUX registers. + * Empirically, writing to them as well seems to be necessary for + * address translation to function properly. + */ + ret = fpc202_write(priv, reg_aux, val); + + priv->addr_caches[port_id][dev_num] = val; + +out_unlock: + mutex_unlock(&priv->reg_dev_lock); + return ret; +} + +static int fpc202_attach_addr(struct i2c_atr *atr, u32 chan_id, + u16 addr, u16 alias) +{ + struct fpc202_priv *priv = i2c_atr_get_driver_data(atr); + + dev_dbg(&priv->client->dev, "attaching address 0x%02x to alias 0x%02x\n", addr, alias); + + return fpc202_write_dev_addr(priv, chan_id, fpc202_dev_num_from_alias(alias), addr); +} + +static void fpc202_detach_addr(struct i2c_atr *atr, u32 chan_id, + u16 addr) +{ + struct fpc202_priv *priv = i2c_atr_get_driver_data(atr); + int dev_num, reg_mod, val; + + for (dev_num = 0; dev_num < 2; dev_num++) { + reg_mod = FPC202_REG_MOD_DEV(chan_id, dev_num); + + mutex_lock(&priv->reg_dev_lock); + + val = priv->addr_caches[chan_id][dev_num]; + + mutex_unlock(&priv->reg_dev_lock); + + if (val < 0) { + dev_err(&priv->client->dev, "failed to read register 0x%x while detaching address 0x%02x\n", + reg_mod, addr); + return; + } + + if (val == (addr & 0x7f)) { + fpc202_write_dev_addr(priv, chan_id, dev_num, FPC202_REG_DEV_INVALID); + return; + } + } +} + +struct i2c_atr_ops fpc202_atr_ops = { + .attach_addr = fpc202_attach_addr, + .detach_addr = fpc202_detach_addr, +}; + +static int fpc202_probe_port(struct fpc202_priv *priv, int port_id) +{ + struct device *dev = &priv->client->dev; + u16 aliases[FPC202_ALIASES_PER_PORT] = { }; + struct i2c_atr_adap_desc desc = { }; + struct device_node *i2c_handle; + char port_name[6]; + int ret = 0; + + if (port_id > 2) + return -EINVAL; + + snprintf(port_name, 6, "port%d", port_id); + + i2c_handle = of_get_child_by_name(dev->of_node, port_name); + if (!i2c_handle) + return -EINVAL; + + desc.chan_id = port_id; + desc.parent = dev; + desc.bus_handle = of_node_to_fwnode(i2c_handle); + desc.num_aliases = FPC202_ALIASES_PER_PORT; + + fpc202_fill_alias_table(priv->client, aliases, port_id); + desc.aliases = aliases; + + ret = i2c_atr_add_adapter(priv->atr, &desc); + if (ret) + return ret; + + of_node_put(i2c_handle); + + ret = fpc202_write_dev_addr(priv, port_id, 0, FPC202_REG_DEV_INVALID); + if (ret) + return ret; + + return fpc202_write_dev_addr(priv, port_id, 1, FPC202_REG_DEV_INVALID); +} + +static int fpc202_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct fpc202_priv *priv; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + mutex_init(&priv->reg_dev_lock); + + priv->client = client; + i2c_set_clientdata(client, priv); + + priv->en_gpio = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_HIGH); + if (IS_ERR(priv->en_gpio)) { + ret = PTR_ERR(priv->en_gpio); + dev_err(dev, "failed to fetch enable GPIO! err %d\n", ret); + goto destroy_mutex; + } + + priv->gpio.label = "gpio-fpc202"; + priv->gpio.base = -1; + priv->gpio.direction_input = fpc202_gpio_direction_input; + priv->gpio.direction_output = fpc202_gpio_direction_output; + priv->gpio.set = fpc202_gpio_set; + priv->gpio.get = fpc202_gpio_get; + priv->gpio.ngpio = FPC202_GPIO_COUNT; + priv->gpio.parent = dev; + priv->gpio.owner = THIS_MODULE; + + ret = gpiochip_add_data(&priv->gpio, priv); + if (ret) { + priv->gpio.parent = NULL; + dev_err(dev, "failed to add gpiochip err %d", ret); + goto disable_gpio; + } + + priv->atr = i2c_atr_new(client->adapter, dev, &fpc202_atr_ops, 2, I2C_ATR_FLAG_DYNAMIC_C2A); + if (IS_ERR(priv->atr)) { + ret = PTR_ERR(priv->atr); + dev_err(dev, "failed to create i2c atr err %d", ret); + goto disable_gpio; + } + + i2c_atr_set_driver_data(priv->atr, priv); + + ret = fpc202_probe_port(priv, 0); + if (ret) { + dev_err(dev, "Failed to probe port 0, err %d\n", ret); + goto delete_atr; + } + + ret = fpc202_probe_port(priv, 1); + if (ret) { + dev_err(dev, "Failed to probe port 1, err %d\n", ret); + goto delete_atr; + } + + dev_info(&client->dev, "%s FPC202 Dual Port controller found\n", client->name); + + goto out; + +delete_atr: + i2c_atr_delete(priv->atr); +disable_gpio: + fpc202_set_enable(priv, 0); + gpiochip_remove(&priv->gpio); +destroy_mutex: + mutex_destroy(&priv->reg_dev_lock); +out: + return ret; +} + +static void fpc202_remove(struct i2c_client *client) +{ + struct fpc202_priv *priv = i2c_get_clientdata(client); + + mutex_destroy(&priv->reg_dev_lock); + + i2c_atr_delete(priv->atr); + + fpc202_set_enable(priv, 0); + gpiochip_remove(&priv->gpio); +} + +static const struct of_device_id fpc202_of_match[] = { + { .compatible = "ti,fpc202" }, + {} +}; +MODULE_DEVICE_TABLE(of, fpc202_of_match); + +static struct i2c_driver fpc202_driver = { + .driver = { + .name = "fpc202", + .of_match_table = fpc202_of_match, + }, + .probe = fpc202_probe, + .remove = fpc202_remove, +}; + +module_i2c_driver(fpc202_driver); + +MODULE_AUTHOR("Romain Gantois "); +MODULE_DESCRIPTION("TI FPC202 Dual Port Controller driver"); +MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(I2C_ATR);