From patchwork Fri Sep 6 07:47:31 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Kimriver Liu X-Patchwork-Id: 826099 Received: from mail03.siengine.com (mail03.siengine.com [43.240.192.165]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 7CECE14264A; Fri, 6 Sep 2024 07:48:31 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=43.240.192.165 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1725608915; cv=none; b=fF7mSO+W9+3EcGT8K09rQ4taJ7XPYKZjaFBfBCxaMWOiXw8pTDg4U3OvFJvbKJGUvHZIM8XTTDJRbKFjerE2auS8oc6IFjh/rMmbwrDl7MR2lu3mP5gSnbbstmpvPXfnkR1SXBsrRjV1R960VwxabxFuecTD1VHLk3+kHz9Y7qA= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1725608915; c=relaxed/simple; bh=wQ27PLSu2PxRg17jkVSKt2A1Ce2Al7tslbtyusXWsNw=; h=From:To:CC:Subject:Date:Message-ID:MIME-Version:Content-Type; b=ilx+ELBGD+zLvjLhS3sJ7LZRcWcrDbrKzgpxyHMIt+Xh/XhJ1CLZL8j1YJuP5asRHnvzy9qGk3IeO6Jxnn7U0m8o8htW9e+VXXKNX93lHM23yRAauTnpsNqtZE1XYvsvHStGXhGv4t9DLcL5bEgceBSnNRGHMvJJIubLBmiKzlg= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=siengine.com; spf=pass smtp.mailfrom=siengine.com; arc=none smtp.client-ip=43.240.192.165 Authentication-Results: smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=siengine.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=siengine.com Received: from dsgsiengine01.siengine.com ([10.8.1.61]) by mail03.siengine.com with ESMTPS id 4867lY1u023196 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NO); Fri, 6 Sep 2024 15:47:34 +0800 (+08) (envelope-from hongchi.peng@siengine.com) Received: from SEEXMB03-2019.siengine.com (SEEXMB03-2019.siengine.com [10.8.1.33]) by dsgsiengine01.siengine.com (SkyGuard) with ESMTPS id 4X0Sxf26kfz7ZMt3; Fri, 6 Sep 2024 15:47:34 +0800 (CST) Received: from SEEXMB05-2019.siengine.com (10.8.1.153) by SEEXMB03-2019.siengine.com (10.8.1.33) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384) id 15.2.1544.11; Fri, 6 Sep 2024 15:47:33 +0800 Received: from SEEXMB03-2019.siengine.com (10.8.1.33) by SEEXMB05-2019.siengine.com (10.8.1.153) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384) id 15.2.1544.9; Fri, 6 Sep 2024 15:47:33 +0800 Received: from localhost (10.12.10.38) by SEEXMB03-2019.siengine.com (10.8.1.33) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA) id 15.2.1544.11 via Frontend Transport; Fri, 6 Sep 2024 15:47:33 +0800 From: Kimriver Liu To: CC: , , , , , , Subject: [PATCH] i2c: designware: fix master is holding SCL low while ENABLE bit is disabled Date: Fri, 6 Sep 2024 15:47:31 +0800 Message-ID: <20240906074731.3064-1-kimriver.liu@siengine.com> X-Mailer: git-send-email 2.34.1 Precedence: bulk X-Mailing-List: linux-i2c@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-DKIM-Results: [10.8.1.61]; dkim=none; X-DNSRBL: X-SPAM-SOURCE-CHECK: pass X-MAIL: mail03.siengine.com 4867lY1u023196 It was observed issuing ABORT bit(IC_ENABLE[1]) will not work when IC_ENABLE is already disabled. Check if ENABLE bit(IC_ENABLE[0]) is disabled when the master is holding SCL low. If ENABLE bit is disabled, the software need enable it before trying to issue ABORT bit. otherwise, the controller ignores any write to ABORT bit. Signed-off-by: Kimriver Liu --- V5->V6: restore i2c_dw_is_master_idling() function checking V4->V5: delete master idling checking V3->V4: 1. update commit messages and add patch version and changelog 2. move print the error message in i2c_dw_xfer V2->V3: change (!enable) to (!(enable & DW_IC_ENABLE_ENABLE)) V1->V2: used standard words in function names and addressed review comments link to V1: https://lore.kernel.org/lkml/20240904064224.2394-1-kimriver.liu@siengine.com/ --- drivers/i2c/busses/i2c-designware-common.c | 11 +++++++++++ drivers/i2c/busses/i2c-designware-master.c | 22 ++++++++++++++++++++++ 2 files changed, 33 insertions(+) diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c index e8a688d04aee..2b3398cd4382 100644 --- a/drivers/i2c/busses/i2c-designware-common.c +++ b/drivers/i2c/busses/i2c-designware-common.c @@ -453,6 +453,17 @@ void __i2c_dw_disable(struct dw_i2c_dev *dev) abort_needed = raw_intr_stats & DW_IC_INTR_MST_ON_HOLD; if (abort_needed) { + if (!(enable & DW_IC_ENABLE_ENABLE)) { + regmap_write(dev->map, DW_IC_ENABLE, DW_IC_ENABLE_ENABLE); + enable |= DW_IC_ENABLE_ENABLE; + /* + * Wait two ic_clk delay when enabling the I2C to ensure ENABLE bit + * is already set by the driver (for 400KHz this is 25us) + * as described in the DesignWare I2C databook. + */ + fsleep(25); + } + regmap_write(dev->map, DW_IC_ENABLE, enable | DW_IC_ENABLE_ABORT); ret = regmap_read_poll_timeout(dev->map, DW_IC_ENABLE, enable, !(enable & DW_IC_ENABLE_ABORT), 10, diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c index c7e56002809a..132b7237c004 100644 --- a/drivers/i2c/busses/i2c-designware-master.c +++ b/drivers/i2c/busses/i2c-designware-master.c @@ -253,6 +253,19 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev) __i2c_dw_write_intr_mask(dev, DW_IC_INTR_MASTER_MASK); } +static bool i2c_dw_is_master_idling(struct dw_i2c_dev *dev) +{ + u32 status; + + regmap_read(dev->map, DW_IC_STATUS, &status); + if (!(status & DW_IC_STATUS_MASTER_ACTIVITY)) + return true; + + return !regmap_read_poll_timeout(dev->map, DW_IC_STATUS, status, + !(status & DW_IC_STATUS_MASTER_ACTIVITY), + 1100, 20000); +} + static int i2c_dw_check_stopbit(struct dw_i2c_dev *dev) { u32 val; @@ -788,6 +801,15 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) goto done; } + /* + * This happens rarely and is hard to reproduce. Debug trace + * showed that IC_STATUS had value of 0x23 when STOP_DET occurred, + * if disable IC_ENABLE.ENABLE immediately that can result in + * IC_RAW_INTR_STAT.MASTER_ON_HOLD holding SCL low. + */ + if (!i2c_dw_is_master_idling(dev)) + dev_err(dev->dev, "I2C master not idling\n"); + /* * We must disable the adapter before returning and signaling the end * of the current transfer. Otherwise the hardware might continue