@@ -18,6 +18,10 @@
#include "fsi-master.h"
+struct fsi_master_aspeed_data {
+ u32 opb_retry_counter;
+};
+
struct fsi_master_aspeed {
struct fsi_master master;
struct mutex lock; /* protect HW access */
@@ -81,6 +85,13 @@ static const u32 fsi_base = 0xa0000000;
#define XFER_HALFWORD (BIT(0))
#define XFER_BYTE (0)
+/* OPB_RETRY_COUNTER */
+#define OPB_RC_FSI_OPB BIT(19) /* Access FSI space over OPB, not AHB (AST27xx+) */
+#define OPB_RC_CTRL_OPB BIT(18) /* Access controller over OPB, not AHB (AST27xx+) */
+#define OPB_RC_XFER_ACK_EN BIT(16) /* Enable OPBx xfer ack bit without mask */
+#define OPB_RC_COUNT GENMASK(15, 0) /* Number of retries */
+#define OPB_RC_DEFAULT 0x10
+
#define CREATE_TRACE_POINTS
#include <trace/events/fsi_master_aspeed.h>
@@ -536,6 +547,8 @@ static int tacoma_cabled_fsi_fixup(struct device *dev)
static int fsi_master_aspeed_probe(struct platform_device *pdev)
{
+ const struct fsi_master_aspeed_data *md = of_device_get_match_data(&pdev->dev);
+ u32 opb_retry_counter = md ? md->opb_retry_counter : OPB_RC_DEFAULT;
struct fsi_master_aspeed *aspeed;
int rc, links, reg;
__be32 raw;
@@ -579,8 +592,7 @@ static int fsi_master_aspeed_probe(struct platform_device *pdev)
writel(OPB1_XFER_ACK_EN | OPB0_XFER_ACK_EN,
aspeed->base + OPB_IRQ_MASK);
- /* TODO: determine an appropriate value */
- writel(0x10, aspeed->base + OPB_RETRY_COUNTER);
+ writel(opb_retry_counter, aspeed->base + OPB_RETRY_COUNTER);
writel(ctrl_base, aspeed->base + OPB_CTRL_BASE);
writel(fsi_base, aspeed->base + OPB_FSI_BASE);
@@ -656,8 +668,23 @@ static int fsi_master_aspeed_remove(struct platform_device *pdev)
return 0;
}
+static const struct fsi_master_aspeed_data fsi_master_ast2600_data = {
+ .opb_retry_counter = OPB_RC_DEFAULT,
+};
+
+static const struct fsi_master_aspeed_data fsi_master_ast2700_data = {
+ .opb_retry_counter = OPB_RC_FSI_OPB | OPB_RC_CTRL_OPB | OPB_RC_DEFAULT,
+};
+
static const struct of_device_id fsi_master_aspeed_match[] = {
- { .compatible = "aspeed,ast2600-fsi-master" },
+ {
+ .compatible = "aspeed,ast2600-fsi-master",
+ .data = &fsi_master_ast2600_data,
+ },
+ {
+ .compatible = "aspeed,ast2700-fsi-master",
+ .data = &fsi_master_ast2700_data,
+ },
{ },
};
MODULE_DEVICE_TABLE(of, fsi_master_aspeed_match);
AST2700 requires a few bits set differently in the OPB retry counter register, so add some match data and set the register accordingly. Signed-off-by: Eddie James <eajames@linux.ibm.com> --- drivers/fsi/fsi-master-aspeed.c | 33 ++++++++++++++++++++++++++++++--- 1 file changed, 30 insertions(+), 3 deletions(-)