From patchwork Thu Dec 7 14:14:04 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Andy Shevchenko X-Patchwork-Id: 752148 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=intel.com header.i=@intel.com header.b="k7k6LybD" Received: from mgamail.intel.com (mgamail.intel.com [134.134.136.100]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 1CC5D1991; Thu, 7 Dec 2023 06:17:29 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=intel.com; i=@intel.com; q=dns/txt; s=Intel; t=1701958650; x=1733494650; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version:content-transfer-encoding; bh=OVVTBxYDE+m0PvVoNkFFOxxsp2QpkBsrf+LaWlne0X4=; b=k7k6LybDayN7yk+O78xp/5bkpZAOCWy4ZEqbzqP8oQ8tq6yC2Cgi5qbD xKJdkbO+KahAtJ0VXoMAgK1JyGS6VUSLOZGhUmhTwQK0xi92wBzWT0uhK tCqKOWkhZPFhuInzRsCpiibQKfbLLZ6D9ANw3gOYfMEOk55fIQColXq/x Blkjopzdjxd+fcAJQs/6Oh4Z+E+daAiLFYisMBZ1vlCr0I/HQ17az8IOC Uxd/RatfN1DY8b5HGkEJTLLH9Jk6jUDYMWd3MeIMf73lgo61ORSSdqrLD L9k6XUrU3LPvmqg1IFjaWmxvA6YP8Z8aP2CB8AWhnPdbUbc5h3E6oF3M3 g==; X-IronPort-AV: E=McAfee;i="6600,9927,10917"; a="460726228" X-IronPort-AV: E=Sophos;i="6.04,256,1695711600"; d="scan'208";a="460726228" Received: from fmsmga002.fm.intel.com ([10.253.24.26]) by orsmga105.jf.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 07 Dec 2023 06:17:16 -0800 X-ExtLoop1: 1 X-IronPort-AV: E=McAfee;i="6600,9927,10917"; a="889756110" X-IronPort-AV: E=Sophos;i="6.04,256,1695711600"; d="scan'208";a="889756110" Received: from black.fi.intel.com ([10.237.72.28]) by fmsmga002.fm.intel.com with ESMTP; 07 Dec 2023 06:17:12 -0800 Received: by black.fi.intel.com (Postfix, from userid 1003) id 95E52D65; Thu, 7 Dec 2023 16:17:03 +0200 (EET) From: Andy Shevchenko To: Mario Limonciello , Jarkko Nikula , Herbert Xu , Andy Shevchenko , Wolfram Sang , Andi Shyti , linux-i2c@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Mika Westerberg , Jan Dabros , Philipp Zabel , Serge Semin Subject: [PATCH v5 24/24] i2c: designware: Fix spelling and other issues in the comments Date: Thu, 7 Dec 2023 16:14:04 +0200 Message-ID: <20231207141653.2785124-25-andriy.shevchenko@linux.intel.com> X-Mailer: git-send-email 2.43.0.rc1.1.gbec44491f096 In-Reply-To: <20231207141653.2785124-1-andriy.shevchenko@linux.intel.com> References: <20231207141653.2785124-1-andriy.shevchenko@linux.intel.com> Precedence: bulk X-Mailing-List: linux-i2c@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Fix spelling and other issues, such as kernel-doc reported about, in the comments. While at it, fix some indentation issues as well. Reviewed-by: Mario Limonciello Tested-by: Serge Semin Acked-by: Jarkko Nikula Link: https://lore.kernel.org/r/20231120144641.1660574-25-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko Reviewed-by: Andi Shyti --- drivers/i2c/busses/i2c-designware-amdpsp.c | 14 +++++++------- drivers/i2c/busses/i2c-designware-common.c | 8 +++++--- drivers/i2c/busses/i2c-designware-core.h | 10 +++++----- drivers/i2c/busses/i2c-designware-master.c | 15 +++++++++------ drivers/i2c/busses/i2c-designware-platdrv.c | 4 ++-- drivers/i2c/busses/i2c-designware-slave.c | 6 ++++-- 6 files changed, 32 insertions(+), 25 deletions(-) diff --git a/drivers/i2c/busses/i2c-designware-amdpsp.c b/drivers/i2c/busses/i2c-designware-amdpsp.c index 63454b06e5da..670c7984ccba 100644 --- a/drivers/i2c/busses/i2c-designware-amdpsp.c +++ b/drivers/i2c/busses/i2c-designware-amdpsp.c @@ -155,7 +155,7 @@ static void psp_release_i2c_bus_deferred(struct work_struct *work) /* * If there is any pending transaction, cannot release the bus here. - * psp_release_i2c_bus will take care of this later. + * psp_release_i2c_bus() will take care of this later. */ if (psp_i2c_access_count) goto cleanup; @@ -173,7 +173,7 @@ static int psp_acquire_i2c_bus(void) mutex_lock(&psp_i2c_access_mutex); - /* Return early if mailbox malfunctioned */ + /* Return early if mailbox has malfunctioned */ if (psp_i2c_mbox_fail) goto cleanup; @@ -210,13 +210,13 @@ static void psp_release_i2c_bus(void) { mutex_lock(&psp_i2c_access_mutex); - /* Return early if mailbox was malfunctional */ + /* Return early if mailbox has malfunctioned */ if (psp_i2c_mbox_fail) goto cleanup; /* - * If we are last owner of PSP semaphore, need to release aribtration - * via mailbox. + * If we are the last owner of the PSP semaphore, we need to release + * arbitration via mailbox. */ psp_i2c_access_count--; if (psp_i2c_access_count) @@ -235,9 +235,9 @@ static void psp_release_i2c_bus(void) /* * Locking methods are based on the default implementation from - * drivers/i2c/i2c-core-base.c, but with psp acquire and release operations + * drivers/i2c/i2c-core-base.c, but with PSP acquire and release operations * added. With this in place we can ensure that i2c clients on the bus shared - * with psp are able to lock HW access to the bus for arbitrary number of + * with PSP are able to lock HW access to the bus for arbitrary number of * operations - that is e.g. write-wait-read. */ static void i2c_adapter_dw_psp_lock_bus(struct i2c_adapter *adapter, diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c index b8e5d56473d6..bef53a746b8d 100644 --- a/drivers/i2c/busses/i2c-designware-common.c +++ b/drivers/i2c/busses/i2c-designware-common.c @@ -127,6 +127,8 @@ static int dw_reg_write_word(void *context, unsigned int reg, unsigned int val) * Autodetects needed register access mode and creates the regmap with * corresponding read/write callbacks. This must be called before doing any * other register access. + * + * Return: 0 on success, or negative errno otherwise. */ int i2c_dw_init_regmap(struct dw_i2c_dev *dev) { @@ -174,7 +176,7 @@ int i2c_dw_init_regmap(struct dw_i2c_dev *dev) /* * Note we'll check the return value of the regmap IO accessors only * at the probe stage. The rest of the code won't do this because - * basically we have MMIO-based regmap so non of the read/write methods + * basically we have MMIO-based regmap, so none of the read/write methods * can fail. */ dev->map = devm_regmap_init(dev->dev, NULL, dev, &map_cfg); @@ -336,7 +338,7 @@ static u32 i2c_dw_acpi_round_bus_speed(struct device *device) acpi_speed = i2c_acpi_find_bus_speed(device); /* - * Some DSTDs use a non standard speed, round down to the lowest + * Some DSDTs use a non standard speed, round down to the lowest * standard speed. */ for (i = 0; i < ARRAY_SIZE(supported_speeds); i++) { @@ -532,7 +534,7 @@ void __i2c_dw_disable(struct dw_i2c_dev *dev) /* * Wait 10 times the signaling period of the highest I2C - * transfer supported by the driver (for 400KHz this is + * transfer supported by the driver (for 400kHz this is * 25us) as described in the DesignWare I2C databook. */ usleep_range(25, 250); diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h index 7479cb3a450d..5405d4da2b7d 100644 --- a/drivers/i2c/busses/i2c-designware-core.h +++ b/drivers/i2c/busses/i2c-designware-core.h @@ -141,10 +141,10 @@ #define DW_IC_SLAVE 1 /* - * Hardware abort codes from the DW_IC_TX_ABRT_SOURCE register + * Hardware abort codes from the DW_IC_TX_ABRT_SOURCE register. * - * Only expected abort codes are listed here - * refer to the datasheet for the full list + * Only expected abort codes are listed here, + * refer to the datasheet for the full list. */ #define ABRT_7B_ADDR_NOACK 0 #define ABRT_10ADDR1_NOACK 1 @@ -201,7 +201,7 @@ struct i2c_dw_semaphore_callbacks; * @rst: optional reset for the controller * @slave: represent an I2C slave device * @get_clk_rate_khz: callback to retrieve IP specific bus speed - * @cmd_err: run time hadware error code + * @cmd_err: run time hardware error code * @msgs: points to an array of messages currently being transferred * @msgs_num: the number of elements in msgs * @msg_write_idx: the element index of the current tx message in the msgs array @@ -236,7 +236,7 @@ struct i2c_dw_semaphore_callbacks; * @release_lock: function to release a hardware lock on the bus * @semaphore_idx: Index of table with semaphore type attached to the bus. It's * -1 if there is no semaphore. - * @shared_with_punit: true if this bus is shared with the SoCs PUNIT + * @shared_with_punit: true if this bus is shared with the SoC's PUNIT * @init: function to initialize the I2C hardware * @set_sda_hold_time: callback to retrieve IP specific SDA hold timing * @mode: operation mode - DW_IC_MASTER or DW_IC_SLAVE diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c index bd3c8db521de..4ef4160db01f 100644 --- a/drivers/i2c/busses/i2c-designware-master.c +++ b/drivers/i2c/busses/i2c-designware-master.c @@ -168,12 +168,14 @@ static int i2c_dw_set_timings_master(struct dw_i2c_dev *dev) } /** - * i2c_dw_init_master() - Initialize the designware I2C master hardware + * i2c_dw_init_master() - Initialize the DesignWare I2C master hardware * @dev: device private data * * This functions configures and enables the I2C master. * This function is called during I2C init function, and in case of timeout at * run time. + * + * Return: 0 on success, or negative errno otherwise. */ static int i2c_dw_init_master(struct dw_i2c_dev *dev) { @@ -314,7 +316,7 @@ static int amd_i2c_dw_xfer_quirk(struct i2c_adapter *adap, struct i2c_msg *msgs, /* * Initiate the i2c read/write transaction of buffer length, * and poll for bus busy status. For the last message transfer, - * update the command with stopbit enable. + * update the command with stop bit enable. */ for (msg_itr_lmt = buf_len; msg_itr_lmt > 0; msg_itr_lmt--) { if (msg_wrt_idx == num_msgs - 1 && msg_itr_lmt == 1) @@ -421,7 +423,7 @@ static int txgbe_i2c_dw_xfer_quirk(struct i2c_adapter *adap, struct i2c_msg *msg /* * Initiate (and continue) low level master read/write transaction. - * This function is only called from i2c_dw_isr, and pumping i2c_msg + * This function is only called from i2c_dw_isr(), and pumping i2c_msg * messages into the tx buffer. Even if the size of i2c_msg data is * longer than the size of the tx buffer, it handles everything. */ @@ -459,7 +461,8 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev) buf = msgs[dev->msg_write_idx].buf; buf_len = msgs[dev->msg_write_idx].len; - /* If both IC_EMPTYFIFO_HOLD_MASTER_EN and + /* + * If both IC_EMPTYFIFO_HOLD_MASTER_EN and * IC_RESTART_EN are set, we must manually * set restart bit between messages. */ @@ -949,7 +952,7 @@ static int i2c_dw_init_recovery_info(struct dw_i2c_dev *dev) rinfo->unprepare_recovery = i2c_dw_unprepare_recovery; adap->bus_recovery_info = rinfo; - dev_info(dev->dev, "running with gpio recovery mode! scl%s", + dev_info(dev->dev, "running with GPIO recovery mode! scl%s", rinfo->sda_gpiod ? ",sda" : ""); return 0; @@ -1053,7 +1056,7 @@ int i2c_dw_probe_master(struct dw_i2c_dev *dev) ret = devm_request_irq(dev->dev, dev->irq, i2c_dw_isr, irq_flags, dev_name(dev->dev), dev); if (ret) { - dev_err(dev->dev, "failure requesting irq %i: %d\n", + dev_err(dev->dev, "failure requesting IRQ %i: %d\n", dev->irq, ret); return ret; } diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index 02dc1d1001f2..fa9c0c56b11e 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -72,7 +72,7 @@ static int bt1_i2c_write(void *context, unsigned int reg, unsigned int val) return ret; return regmap_write(dev->sysmap, BT1_I2C_CTL, - BT1_I2C_CTL_GO | BT1_I2C_CTL_WR | (reg & BT1_I2C_CTL_ADDR_MASK)); + BT1_I2C_CTL_GO | BT1_I2C_CTL_WR | (reg & BT1_I2C_CTL_ADDR_MASK)); } static struct regmap_config bt1_i2c_cfg = { @@ -304,7 +304,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) adap = &dev->adapter; adap->owner = THIS_MODULE; adap->class = dmi_check_system(dw_i2c_hwmon_class_dmi) ? - I2C_CLASS_HWMON : I2C_CLASS_DEPRECATED; + I2C_CLASS_HWMON : I2C_CLASS_DEPRECATED; adap->nr = -1; if (dev->flags & ACCESS_NO_IRQ_SUSPEND) diff --git a/drivers/i2c/busses/i2c-designware-slave.c b/drivers/i2c/busses/i2c-designware-slave.c index 5abd5ec41954..21d80fe81cfe 100644 --- a/drivers/i2c/busses/i2c-designware-slave.c +++ b/drivers/i2c/busses/i2c-designware-slave.c @@ -32,12 +32,14 @@ static void i2c_dw_configure_fifo_slave(struct dw_i2c_dev *dev) } /** - * i2c_dw_init_slave() - Initialize the designware i2c slave hardware + * i2c_dw_init_slave() - Initialize the DesignWare i2c slave hardware * @dev: device private data * * This function configures and enables the I2C in slave mode. * This function is called during I2C init function, and in case of timeout at * run time. + * + * Return: 0 on success, or negative errno otherwise. */ static int i2c_dw_init_slave(struct dw_i2c_dev *dev) { @@ -264,7 +266,7 @@ int i2c_dw_probe_slave(struct dw_i2c_dev *dev) ret = devm_request_irq(dev->dev, dev->irq, i2c_dw_isr_slave, IRQF_SHARED, dev_name(dev->dev), dev); if (ret) { - dev_err(dev->dev, "failure requesting irq %i: %d\n", + dev_err(dev->dev, "failure requesting IRQ %i: %d\n", dev->irq, ret); return ret; }