diff mbox series

[v3,1/2] dt-bindings: i2c: mv64xxx: add reset-gpios property

Message ID 20231018210805.1569987-2-chris.packham@alliedtelesis.co.nz
State Superseded
Headers show
Series i2c: mv64xxx: reset-gpios | expand

Commit Message

Chris Packham Oct. 18, 2023, 9:08 p.m. UTC
Add reset-gpios and reset-duration-us properties to the
marvell,mv64xxx-i2c binding. These can be used to describe hardware
where a common reset GPIO is connected to all downstream devices on and
I2C bus. This reset will be asserted then released before the downstream
devices on the bus are probed.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---

Notes:
    Changes in v3:
    - Rename reset-delay-us to reset-duration-us to better reflect its
      purpose
    - Add default: for reset-duration-us
    - Add description: for reset-gpios
    Changes in v2:
    - Update commit message
    - Add reset-delay-us property

 .../devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml   | 10 ++++++++++
 1 file changed, 10 insertions(+)

Comments

Krzysztof Kozlowski Oct. 19, 2023, 7:02 a.m. UTC | #1
On 18/10/2023 23:08, Chris Packham wrote:
> Add reset-gpios and reset-duration-us properties to the
> marvell,mv64xxx-i2c binding. These can be used to describe hardware
> where a common reset GPIO is connected to all downstream devices on and
> I2C bus. This reset will be asserted then released before the downstream
> devices on the bus are probed.
> 
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> ---
> 

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml
index 461d1c9ee3f7..ecf5b279cfa4 100644
--- a/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml
@@ -70,6 +70,16 @@  properties:
   resets:
     maxItems: 1
 
+  reset-gpios:
+    description:
+      GPIO pin providing a common reset for all downstream devices. This GPIO
+      will be asserted then released before the downstream devices are probed.
+    maxItems: 1
+
+  reset-duration-us:
+    description: Reset duration in us.
+    default: 1
+
   dmas:
     items:
       - description: RX DMA Channel