From patchwork Fri Jun 16 13:59:10 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Tomi Valkeinen X-Patchwork-Id: 693890 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 5D31CEB64DD for ; Fri, 16 Jun 2023 14:00:37 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1344739AbjFPOAf (ORCPT ); Fri, 16 Jun 2023 10:00:35 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:51450 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1345125AbjFPOA1 (ORCPT ); Fri, 16 Jun 2023 10:00:27 -0400 Received: from perceval.ideasonboard.com (perceval.ideasonboard.com [213.167.242.64]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 09A1035AD; Fri, 16 Jun 2023 07:00:19 -0700 (PDT) Received: from desky.lan (91-154-35-171.elisa-laajakaista.fi [91.154.35.171]) by perceval.ideasonboard.com (Postfix) with ESMTPSA id 1042D9CA; Fri, 16 Jun 2023 15:59:44 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=ideasonboard.com; s=mail; t=1686923985; bh=f8ha1vWK5HPZEldqZ9/+P2loRbk6ZgPrtxVUcs5sj4Q=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=A85f/1iWo3+9EU7cth57WVo9U0N3InsXXZG+795rZJv4DVLn5Fu56By99RvVp1puf 14EzO9KVIyu+qVc7f0ncDKlzNz8TT3mlmpW2ZseY9A1ho58VfhHB4awiqs1B3GKXKV gU/gzPtsWaMX2dxWU73ANTb2EVLs4WF6Javh8ZPI= From: Tomi Valkeinen To: linux-media@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-i2c@vger.kernel.org, Luca Ceresoli , Andy Shevchenko , Matti Vaittinen , Laurent Pinchart , Sakari Ailus Cc: Wolfram Sang , Rob Herring , Krzysztof Kozlowski , Mauro Carvalho Chehab , Peter Rosin , Liam Girdwood , Mark Brown , Michael Tretter , Hans Verkuil , Mike Pagano , =?utf-8?q?Krzysztof_Ha=C5=82asa?= , Marek Vasut , Satish Nagireddy , Tomi Valkeinen , Andy Shevchenko Subject: [PATCH v14 06/18] media: i2c: add DS90UB960 driver Date: Fri, 16 Jun 2023 16:59:10 +0300 Message-Id: <20230616135922.442979-7-tomi.valkeinen@ideasonboard.com> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20230616135922.442979-1-tomi.valkeinen@ideasonboard.com> References: <20230616135922.442979-1-tomi.valkeinen@ideasonboard.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-i2c@vger.kernel.org Add driver for TI DS90UB960 FPD-Link III Deserializer. Signed-off-by: Tomi Valkeinen Reviewed-by: Andy Shevchenko --- MAINTAINERS | 8 + drivers/media/i2c/Kconfig | 21 + drivers/media/i2c/Makefile | 1 + drivers/media/i2c/ds90ub960.c | 4049 +++++++++++++++++++++++++++++++++ include/media/i2c/ds90ub9xx.h | 22 + 5 files changed, 4101 insertions(+) create mode 100644 drivers/media/i2c/ds90ub960.c create mode 100644 include/media/i2c/ds90ub9xx.h diff --git a/MAINTAINERS b/MAINTAINERS index 348bc924a56f..22e8d1bf148e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -20929,6 +20929,14 @@ F: drivers/misc/tifm* F: drivers/mmc/host/tifm_sd.c F: include/linux/tifm.h +TI FPD-LINK DRIVERS +M: Tomi Valkeinen +L: linux-media@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/media/i2c/ti,ds90* +F: drivers/media/i2c/ds90* +F: include/media/i2c/ds90* + TI KEYSTONE MULTICORE NAVIGATOR DRIVERS M: Nishanth Menon M: Santosh Shilimkar diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig index 256d55bb2b1d..80de6c3a6492 100644 --- a/drivers/media/i2c/Kconfig +++ b/drivers/media/i2c/Kconfig @@ -1611,4 +1611,25 @@ config VIDEO_THS7303 endmenu +# +# Video serializers and deserializers (e.g. FPD-Link) +# + +menu "Video serializers and deserializers" + +config VIDEO_DS90UB960 + tristate "TI FPD-Link III/IV Deserializers" + depends on OF && I2C && VIDEO_DEV + select I2C_ATR + select MEDIA_CONTROLLER + select OF_GPIO + select REGMAP_I2C + select V4L2_FWNODE + select VIDEO_V4L2_SUBDEV_API + help + Device driver for the Texas Instruments DS90UB960 + FPD-Link III Deserializer and DS90UB9702 FPD-Link IV Deserializer. + +endmenu + endif # VIDEO_DEV diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile index b44dacf935f4..4458df54db64 100644 --- a/drivers/media/i2c/Makefile +++ b/drivers/media/i2c/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_VIDEO_CS3308) += cs3308.o obj-$(CONFIG_VIDEO_CS5345) += cs5345.o obj-$(CONFIG_VIDEO_CS53L32A) += cs53l32a.o obj-$(CONFIG_VIDEO_CX25840) += cx25840/ +obj-$(CONFIG_VIDEO_DS90UB960) += ds90ub960.o obj-$(CONFIG_VIDEO_DW9714) += dw9714.o obj-$(CONFIG_VIDEO_DW9768) += dw9768.o obj-$(CONFIG_VIDEO_DW9807_VCM) += dw9807-vcm.o diff --git a/drivers/media/i2c/ds90ub960.c b/drivers/media/i2c/ds90ub960.c new file mode 100644 index 000000000000..ff939300c918 --- /dev/null +++ b/drivers/media/i2c/ds90ub960.c @@ -0,0 +1,4049 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Driver for the Texas Instruments DS90UB960-Q1 video deserializer + * + * Copyright (c) 2019 Luca Ceresoli + * Copyright (c) 2023 Tomi Valkeinen + */ + +/* + * (Possible) TODOs: + * + * - PM for serializer and remote peripherals. We need to manage: + * - VPOC + * - Power domain? Regulator? Somehow any remote device should be able to + * cause the VPOC to be turned on. + * - Link between the deserializer and the serializer + * - Related to VPOC management. We probably always want to turn on the VPOC + * and then enable the link. + * - Serializer's services: i2c, gpios, power + * - The serializer needs to resume before the remote peripherals can + * e.g. use the i2c. + * - How to handle gpios? Reserving a gpio essentially keeps the provider + * (serializer) always powered on. + * - Do we need a new bus for the FPD-Link? At the moment the serializers + * are children of the same i2c-adapter where the deserializer resides. + * - i2c-atr could be made embeddable instead of allocatable. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#define MHZ(v) ((u32)((v) * 1000000U)) + +#define UB960_POLL_TIME_MS 500 + +#define UB960_MAX_RX_NPORTS 4 +#define UB960_MAX_TX_NPORTS 2 +#define UB960_MAX_NPORTS (UB960_MAX_RX_NPORTS + UB960_MAX_TX_NPORTS) + +#define UB960_MAX_PORT_ALIASES 8 + +#define UB960_NUM_BC_GPIOS 4 + +/* + * Register map + * + * 0x00-0x32 Shared (UB960_SR) + * 0x33-0x3a CSI-2 TX (per-port paged on DS90UB960, shared on 954) (UB960_TR) + * 0x4c Shared (UB960_SR) + * 0x4d-0x7f FPD-Link RX, per-port paged (UB960_RR) + * 0xb0-0xbf Shared (UB960_SR) + * 0xd0-0xdf FPD-Link RX, per-port paged (UB960_RR) + * 0xf0-0xf5 Shared (UB960_SR) + * 0xf8-0xfb Shared (UB960_SR) + * All others Reserved + * + * Register prefixes: + * UB960_SR_* = Shared register + * UB960_RR_* = FPD-Link RX, per-port paged register + * UB960_TR_* = CSI-2 TX, per-port paged register + * UB960_XR_* = Reserved register + * UB960_IR_* = Indirect register + */ + +#define UB960_SR_I2C_DEV_ID 0x00 +#define UB960_SR_RESET 0x01 +#define UB960_SR_RESET_DIGITAL_RESET1 BIT(1) +#define UB960_SR_RESET_DIGITAL_RESET0 BIT(0) +#define UB960_SR_RESET_GPIO_LOCK_RELEASE BIT(5) + +#define UB960_SR_GEN_CONFIG 0x02 +#define UB960_SR_REV_MASK 0x03 +#define UB960_SR_DEVICE_STS 0x04 +#define UB960_SR_PAR_ERR_THOLD_HI 0x05 +#define UB960_SR_PAR_ERR_THOLD_LO 0x06 +#define UB960_SR_BCC_WDOG_CTL 0x07 +#define UB960_SR_I2C_CTL1 0x08 +#define UB960_SR_I2C_CTL2 0x09 +#define UB960_SR_SCL_HIGH_TIME 0x0a +#define UB960_SR_SCL_LOW_TIME 0x0b +#define UB960_SR_RX_PORT_CTL 0x0c +#define UB960_SR_IO_CTL 0x0d +#define UB960_SR_GPIO_PIN_STS 0x0e +#define UB960_SR_GPIO_INPUT_CTL 0x0f +#define UB960_SR_GPIO_PIN_CTL(n) (0x10 + (n)) /* n < UB960_NUM_GPIOS */ +#define UB960_SR_GPIO_PIN_CTL_GPIO_OUT_SEL 5 +#define UB960_SR_GPIO_PIN_CTL_GPIO_OUT_SRC_SHIFT 2 +#define UB960_SR_GPIO_PIN_CTL_GPIO_OUT_EN BIT(0) + +#define UB960_SR_FS_CTL 0x18 +#define UB960_SR_FS_HIGH_TIME_1 0x19 +#define UB960_SR_FS_HIGH_TIME_0 0x1a +#define UB960_SR_FS_LOW_TIME_1 0x1b +#define UB960_SR_FS_LOW_TIME_0 0x1c +#define UB960_SR_MAX_FRM_HI 0x1d +#define UB960_SR_MAX_FRM_LO 0x1e +#define UB960_SR_CSI_PLL_CTL 0x1f + +#define UB960_SR_FWD_CTL1 0x20 +#define UB960_SR_FWD_CTL1_PORT_DIS(n) BIT((n) + 4) + +#define UB960_SR_FWD_CTL2 0x21 +#define UB960_SR_FWD_STS 0x22 + +#define UB960_SR_INTERRUPT_CTL 0x23 +#define UB960_SR_INTERRUPT_CTL_INT_EN BIT(7) +#define UB960_SR_INTERRUPT_CTL_IE_CSI_TX0 BIT(4) +#define UB960_SR_INTERRUPT_CTL_IE_RX(n) BIT((n)) /* rxport[n] IRQ */ + +#define UB960_SR_INTERRUPT_STS 0x24 +#define UB960_SR_INTERRUPT_STS_INT BIT(7) +#define UB960_SR_INTERRUPT_STS_IS_CSI_TX(n) BIT(4 + (n)) /* txport[n] IRQ */ +#define UB960_SR_INTERRUPT_STS_IS_RX(n) BIT((n)) /* rxport[n] IRQ */ + +#define UB960_SR_TS_CONFIG 0x25 +#define UB960_SR_TS_CONTROL 0x26 +#define UB960_SR_TS_LINE_HI 0x27 +#define UB960_SR_TS_LINE_LO 0x28 +#define UB960_SR_TS_STATUS 0x29 +#define UB960_SR_TIMESTAMP_P0_HI 0x2a +#define UB960_SR_TIMESTAMP_P0_LO 0x2b +#define UB960_SR_TIMESTAMP_P1_HI 0x2c +#define UB960_SR_TIMESTAMP_P1_LO 0x2d + +#define UB960_SR_CSI_PORT_SEL 0x32 + +#define UB960_TR_CSI_CTL 0x33 +#define UB960_TR_CSI_CTL_CSI_CAL_EN BIT(6) +#define UB960_TR_CSI_CTL_CSI_ENABLE BIT(0) + +#define UB960_TR_CSI_CTL2 0x34 +#define UB960_TR_CSI_STS 0x35 +#define UB960_TR_CSI_TX_ICR 0x36 + +#define UB960_TR_CSI_TX_ISR 0x37 +#define UB960_TR_CSI_TX_ISR_IS_CSI_SYNC_ERROR BIT(3) +#define UB960_TR_CSI_TX_ISR_IS_CSI_PASS_ERROR BIT(1) + +#define UB960_TR_CSI_TEST_CTL 0x38 +#define UB960_TR_CSI_TEST_PATT_HI 0x39 +#define UB960_TR_CSI_TEST_PATT_LO 0x3a + +#define UB960_XR_SFILTER_CFG 0x41 +#define UB960_XR_SFILTER_CFG_SFILTER_MAX_SHIFT 4 +#define UB960_XR_SFILTER_CFG_SFILTER_MIN_SHIFT 0 + +#define UB960_XR_AEQ_CTL1 0x42 +#define UB960_XR_AEQ_CTL1_AEQ_ERR_CTL_FPD_CLK BIT(6) +#define UB960_XR_AEQ_CTL1_AEQ_ERR_CTL_ENCODING BIT(5) +#define UB960_XR_AEQ_CTL1_AEQ_ERR_CTL_PARITY BIT(4) +#define UB960_XR_AEQ_CTL1_AEQ_ERR_CTL_MASK \ + (UB960_XR_AEQ_CTL1_AEQ_ERR_CTL_FPD_CLK | \ + UB960_XR_AEQ_CTL1_AEQ_ERR_CTL_ENCODING | \ + UB960_XR_AEQ_CTL1_AEQ_ERR_CTL_PARITY) +#define UB960_XR_AEQ_CTL1_AEQ_SFILTER_EN BIT(0) + +#define UB960_XR_AEQ_ERR_THOLD 0x43 + +#define UB960_RR_BCC_ERR_CTL 0x46 +#define UB960_RR_BCC_STATUS 0x47 +#define UB960_RR_BCC_STATUS_SEQ_ERROR BIT(5) +#define UB960_RR_BCC_STATUS_MASTER_ERR BIT(4) +#define UB960_RR_BCC_STATUS_MASTER_TO BIT(3) +#define UB960_RR_BCC_STATUS_SLAVE_ERR BIT(2) +#define UB960_RR_BCC_STATUS_SLAVE_TO BIT(1) +#define UB960_RR_BCC_STATUS_RESP_ERR BIT(0) +#define UB960_RR_BCC_STATUS_ERROR_MASK \ + (UB960_RR_BCC_STATUS_SEQ_ERROR | UB960_RR_BCC_STATUS_MASTER_ERR | \ + UB960_RR_BCC_STATUS_MASTER_TO | UB960_RR_BCC_STATUS_SLAVE_ERR | \ + UB960_RR_BCC_STATUS_SLAVE_TO | UB960_RR_BCC_STATUS_RESP_ERR) + +#define UB960_RR_FPD3_CAP 0x4a +#define UB960_RR_RAW_EMBED_DTYPE 0x4b +#define UB960_RR_RAW_EMBED_DTYPE_LINES_SHIFT 6 + +#define UB960_SR_FPD3_PORT_SEL 0x4c + +#define UB960_RR_RX_PORT_STS1 0x4d +#define UB960_RR_RX_PORT_STS1_BCC_CRC_ERROR BIT(5) +#define UB960_RR_RX_PORT_STS1_LOCK_STS_CHG BIT(4) +#define UB960_RR_RX_PORT_STS1_BCC_SEQ_ERROR BIT(3) +#define UB960_RR_RX_PORT_STS1_PARITY_ERROR BIT(2) +#define UB960_RR_RX_PORT_STS1_PORT_PASS BIT(1) +#define UB960_RR_RX_PORT_STS1_LOCK_STS BIT(0) +#define UB960_RR_RX_PORT_STS1_ERROR_MASK \ + (UB960_RR_RX_PORT_STS1_BCC_CRC_ERROR | \ + UB960_RR_RX_PORT_STS1_BCC_SEQ_ERROR | \ + UB960_RR_RX_PORT_STS1_PARITY_ERROR) + +#define UB960_RR_RX_PORT_STS2 0x4e +#define UB960_RR_RX_PORT_STS2_LINE_LEN_UNSTABLE BIT(7) +#define UB960_RR_RX_PORT_STS2_LINE_LEN_CHG BIT(6) +#define UB960_RR_RX_PORT_STS2_FPD3_ENCODE_ERROR BIT(5) +#define UB960_RR_RX_PORT_STS2_BUFFER_ERROR BIT(4) +#define UB960_RR_RX_PORT_STS2_CSI_ERROR BIT(3) +#define UB960_RR_RX_PORT_STS2_FREQ_STABLE BIT(2) +#define UB960_RR_RX_PORT_STS2_CABLE_FAULT BIT(1) +#define UB960_RR_RX_PORT_STS2_LINE_CNT_CHG BIT(0) +#define UB960_RR_RX_PORT_STS2_ERROR_MASK \ + UB960_RR_RX_PORT_STS2_BUFFER_ERROR + +#define UB960_RR_RX_FREQ_HIGH 0x4f +#define UB960_RR_RX_FREQ_LOW 0x50 +#define UB960_RR_SENSOR_STS_0 0x51 +#define UB960_RR_SENSOR_STS_1 0x52 +#define UB960_RR_SENSOR_STS_2 0x53 +#define UB960_RR_SENSOR_STS_3 0x54 +#define UB960_RR_RX_PAR_ERR_HI 0x55 +#define UB960_RR_RX_PAR_ERR_LO 0x56 +#define UB960_RR_BIST_ERR_COUNT 0x57 + +#define UB960_RR_BCC_CONFIG 0x58 +#define UB960_RR_BCC_CONFIG_I2C_PASS_THROUGH BIT(6) +#define UB960_RR_BCC_CONFIG_BC_FREQ_SEL_MASK GENMASK(2, 0) + +#define UB960_RR_DATAPATH_CTL1 0x59 +#define UB960_RR_DATAPATH_CTL2 0x5a +#define UB960_RR_SER_ID 0x5b +#define UB960_RR_SER_ALIAS_ID 0x5c + +/* For these two register sets: n < UB960_MAX_PORT_ALIASES */ +#define UB960_RR_SLAVE_ID(n) (0x5d + (n)) +#define UB960_RR_SLAVE_ALIAS(n) (0x65 + (n)) + +#define UB960_RR_PORT_CONFIG 0x6d +#define UB960_RR_PORT_CONFIG_FPD3_MODE_MASK GENMASK(1, 0) + +#define UB960_RR_BC_GPIO_CTL(n) (0x6e + (n)) /* n < 2 */ +#define UB960_RR_RAW10_ID 0x70 +#define UB960_RR_RAW10_ID_VC_SHIFT 6 +#define UB960_RR_RAW10_ID_DT_SHIFT 0 + +#define UB960_RR_RAW12_ID 0x71 +#define UB960_RR_CSI_VC_MAP 0x72 +#define UB960_RR_CSI_VC_MAP_SHIFT(x) ((x) * 2) + +#define UB960_RR_LINE_COUNT_HI 0x73 +#define UB960_RR_LINE_COUNT_LO 0x74 +#define UB960_RR_LINE_LEN_1 0x75 +#define UB960_RR_LINE_LEN_0 0x76 +#define UB960_RR_FREQ_DET_CTL 0x77 +#define UB960_RR_MAILBOX_1 0x78 +#define UB960_RR_MAILBOX_2 0x79 + +#define UB960_RR_CSI_RX_STS 0x7a +#define UB960_RR_CSI_RX_STS_LENGTH_ERR BIT(3) +#define UB960_RR_CSI_RX_STS_CKSUM_ERR BIT(2) +#define UB960_RR_CSI_RX_STS_ECC2_ERR BIT(1) +#define UB960_RR_CSI_RX_STS_ECC1_ERR BIT(0) +#define UB960_RR_CSI_RX_STS_ERROR_MASK \ + (UB960_RR_CSI_RX_STS_LENGTH_ERR | UB960_RR_CSI_RX_STS_CKSUM_ERR | \ + UB960_RR_CSI_RX_STS_ECC2_ERR | UB960_RR_CSI_RX_STS_ECC1_ERR) + +#define UB960_RR_CSI_ERR_COUNTER 0x7b +#define UB960_RR_PORT_CONFIG2 0x7c +#define UB960_RR_PORT_CONFIG2_RAW10_8BIT_CTL_MASK GENMASK(7, 6) +#define UB960_RR_PORT_CONFIG2_RAW10_8BIT_CTL_SHIFT 6 + +#define UB960_RR_PORT_CONFIG2_LV_POL_LOW BIT(1) +#define UB960_RR_PORT_CONFIG2_FV_POL_LOW BIT(0) + +#define UB960_RR_PORT_PASS_CTL 0x7d +#define UB960_RR_SEN_INT_RISE_CTL 0x7e +#define UB960_RR_SEN_INT_FALL_CTL 0x7f + +#define UB960_SR_CSI_FRAME_COUNT_HI(n) (0x90 + 8 * (n)) +#define UB960_SR_CSI_FRAME_COUNT_LO(n) (0x91 + 8 * (n)) +#define UB960_SR_CSI_FRAME_ERR_COUNT_HI(n) (0x92 + 8 * (n)) +#define UB960_SR_CSI_FRAME_ERR_COUNT_LO(n) (0x93 + 8 * (n)) +#define UB960_SR_CSI_LINE_COUNT_HI(n) (0x94 + 8 * (n)) +#define UB960_SR_CSI_LINE_COUNT_LO(n) (0x95 + 8 * (n)) +#define UB960_SR_CSI_LINE_ERR_COUNT_HI(n) (0x96 + 8 * (n)) +#define UB960_SR_CSI_LINE_ERR_COUNT_LO(n) (0x97 + 8 * (n)) + +#define UB960_XR_REFCLK_FREQ 0xa5 /* UB960 */ + +#define UB960_RR_VC_ID_MAP(x) (0xa0 + (x)) /* UB9702 */ + +#define UB960_SR_IND_ACC_CTL 0xb0 +#define UB960_SR_IND_ACC_CTL_IA_AUTO_INC BIT(1) + +#define UB960_SR_IND_ACC_ADDR 0xb1 +#define UB960_SR_IND_ACC_DATA 0xb2 +#define UB960_SR_BIST_CONTROL 0xb3 +#define UB960_SR_MODE_IDX_STS 0xb8 +#define UB960_SR_LINK_ERROR_COUNT 0xb9 +#define UB960_SR_FPD3_ENC_CTL 0xba +#define UB960_SR_FV_MIN_TIME 0xbc +#define UB960_SR_GPIO_PD_CTL 0xbe + +#define UB960_SR_FPD_RATE_CFG 0xc2 /* UB9702 */ +#define UB960_SR_CSI_PLL_DIV 0xc9 /* UB9702 */ + +#define UB960_RR_PORT_DEBUG 0xd0 +#define UB960_RR_AEQ_CTL2 0xd2 +#define UB960_RR_AEQ_CTL2_SET_AEQ_FLOOR BIT(2) + +#define UB960_RR_AEQ_STATUS 0xd3 +#define UB960_RR_AEQ_STATUS_STATUS_2 GENMASK(5, 3) +#define UB960_RR_AEQ_STATUS_STATUS_1 GENMASK(2, 0) + +#define UB960_RR_AEQ_BYPASS 0xd4 +#define UB960_RR_AEQ_BYPASS_EQ_STAGE1_VALUE_SHIFT 5 +#define UB960_RR_AEQ_BYPASS_EQ_STAGE1_VALUE_MASK GENMASK(7, 5) +#define UB960_RR_AEQ_BYPASS_EQ_STAGE2_VALUE_SHIFT 1 +#define UB960_RR_AEQ_BYPASS_EQ_STAGE2_VALUE_MASK GENMASK(3, 1) +#define UB960_RR_AEQ_BYPASS_ENABLE BIT(0) + +#define UB960_RR_AEQ_MIN_MAX 0xd5 +#define UB960_RR_AEQ_MIN_MAX_AEQ_MAX_SHIFT 4 +#define UB960_RR_AEQ_MIN_MAX_AEQ_FLOOR_SHIFT 0 + +#define UB960_RR_SFILTER_STS_0 0xd6 +#define UB960_RR_SFILTER_STS_1 0xd7 +#define UB960_RR_PORT_ICR_HI 0xd8 +#define UB960_RR_PORT_ICR_LO 0xd9 +#define UB960_RR_PORT_ISR_HI 0xda +#define UB960_RR_PORT_ISR_LO 0xdb +#define UB960_RR_FC_GPIO_STS 0xdc +#define UB960_RR_FC_GPIO_ICR 0xdd +#define UB960_RR_SEN_INT_RISE_STS 0xde +#define UB960_RR_SEN_INT_FALL_STS 0xdf + +#define UB960_RR_CHANNEL_MODE 0xe4 /* UB9702 */ + +#define UB960_SR_FPD3_RX_ID(n) (0xf0 + (n)) +#define UB960_SR_FPD3_RX_ID_LEN 6 + +#define UB960_SR_I2C_RX_ID(n) (0xf8 + (n)) /* < UB960_FPD_RX_NPORTS */ + +/* Indirect register blocks */ +#define UB960_IND_TARGET_PAT_GEN 0x00 +#define UB960_IND_TARGET_RX_ANA(n) (0x01 + (n)) +#define UB960_IND_TARGET_CSI_CSIPLL_REG_1 0x92 /* UB9702 */ +#define UB960_IND_TARGET_CSI_ANA 0x07 + +/* UB960_IR_PGEN_*: Indirect Registers for Test Pattern Generator */ + +#define UB960_IR_PGEN_CTL 0x01 +#define UB960_IR_PGEN_CTL_PGEN_ENABLE BIT(0) + +#define UB960_IR_PGEN_CFG 0x02 +#define UB960_IR_PGEN_CSI_DI 0x03 +#define UB960_IR_PGEN_LINE_SIZE1 0x04 +#define UB960_IR_PGEN_LINE_SIZE0 0x05 +#define UB960_IR_PGEN_BAR_SIZE1 0x06 +#define UB960_IR_PGEN_BAR_SIZE0 0x07 +#define UB960_IR_PGEN_ACT_LPF1 0x08 +#define UB960_IR_PGEN_ACT_LPF0 0x09 +#define UB960_IR_PGEN_TOT_LPF1 0x0a +#define UB960_IR_PGEN_TOT_LPF0 0x0b +#define UB960_IR_PGEN_LINE_PD1 0x0c +#define UB960_IR_PGEN_LINE_PD0 0x0d +#define UB960_IR_PGEN_VBP 0x0e +#define UB960_IR_PGEN_VFP 0x0f +#define UB960_IR_PGEN_COLOR(n) (0x10 + (n)) /* n < 15 */ + +#define UB960_IR_RX_ANA_STROBE_SET_CLK 0x08 +#define UB960_IR_RX_ANA_STROBE_SET_CLK_NO_EXTRA_DELAY BIT(3) +#define UB960_IR_RX_ANA_STROBE_SET_CLK_DELAY_MASK GENMASK(2, 0) + +#define UB960_IR_RX_ANA_STROBE_SET_DATA 0x09 +#define UB960_IR_RX_ANA_STROBE_SET_DATA_NO_EXTRA_DELAY BIT(3) +#define UB960_IR_RX_ANA_STROBE_SET_DATA_DELAY_MASK GENMASK(2, 0) + +/* EQ related */ + +#define UB960_MIN_AEQ_STROBE_POS -7 +#define UB960_MAX_AEQ_STROBE_POS 7 + +#define UB960_MANUAL_STROBE_EXTRA_DELAY 6 + +#define UB960_MIN_MANUAL_STROBE_POS -(7 + UB960_MANUAL_STROBE_EXTRA_DELAY) +#define UB960_MAX_MANUAL_STROBE_POS (7 + UB960_MANUAL_STROBE_EXTRA_DELAY) +#define UB960_NUM_MANUAL_STROBE_POS (UB960_MAX_MANUAL_STROBE_POS - UB960_MIN_MANUAL_STROBE_POS + 1) + +#define UB960_MIN_EQ_LEVEL 0 +#define UB960_MAX_EQ_LEVEL 14 +#define UB960_NUM_EQ_LEVELS (UB960_MAX_EQ_LEVEL - UB960_MIN_EQ_LEVEL + 1) + +struct ub960_hw_data { + const char *model; + u8 num_rxports; + u8 num_txports; + bool is_ub9702; + bool is_fpdlink4; +}; + +enum ub960_rxport_mode { + RXPORT_MODE_RAW10 = 0, + RXPORT_MODE_RAW12_HF = 1, + RXPORT_MODE_RAW12_LF = 2, + RXPORT_MODE_CSI2_SYNC = 3, + RXPORT_MODE_CSI2_ASYNC = 4, + RXPORT_MODE_LAST = RXPORT_MODE_CSI2_ASYNC, +}; + +enum ub960_rxport_cdr { + RXPORT_CDR_FPD3 = 0, + RXPORT_CDR_FPD4 = 1, + RXPORT_CDR_LAST = RXPORT_CDR_FPD4, +}; + +struct ub960_rxport { + struct ub960_data *priv; + u8 nport; /* RX port number, and index in priv->rxport[] */ + + struct { + struct v4l2_subdev *sd; + u16 pad; + struct fwnode_handle *ep_fwnode; + } source; + + /* Serializer */ + struct { + struct fwnode_handle *fwnode; + struct i2c_client *client; + unsigned short alias; /* I2C alias (lower 7 bits) */ + struct ds90ub9xx_platform_data pdata; + } ser; + + enum ub960_rxport_mode rx_mode; + enum ub960_rxport_cdr cdr_mode; + + u8 lv_fv_pol; /* LV and FV polarities */ + + struct regulator *vpoc; + + /* EQ settings */ + struct { + bool manual_eq; + + s8 strobe_pos; + + union { + struct { + u8 eq_level_min; + u8 eq_level_max; + } aeq; + + struct { + u8 eq_level; + } manual; + }; + } eq; + + const struct i2c_client *aliased_clients[UB960_MAX_PORT_ALIASES]; +}; + +struct ub960_asd { + struct v4l2_async_subdev base; + struct ub960_rxport *rxport; +}; + +static inline struct ub960_asd *to_ub960_asd(struct v4l2_async_subdev *asd) +{ + return container_of(asd, struct ub960_asd, base); +} + +struct ub960_txport { + struct ub960_data *priv; + u8 nport; /* TX port number, and index in priv->txport[] */ + + u32 num_data_lanes; +}; + +struct ub960_data { + const struct ub960_hw_data *hw_data; + struct i2c_client *client; /* for shared local registers */ + struct regmap *regmap; + + /* lock for register access */ + struct mutex reg_lock; + + struct clk *refclk; + + struct regulator *vddio; + + struct gpio_desc *pd_gpio; + struct delayed_work poll_work; + struct ub960_rxport *rxports[UB960_MAX_RX_NPORTS]; + struct ub960_txport *txports[UB960_MAX_TX_NPORTS]; + + struct v4l2_subdev sd; + struct media_pad pads[UB960_MAX_NPORTS]; + + struct v4l2_ctrl_handler ctrl_handler; + struct v4l2_async_notifier notifier; + + u32 tx_data_rate; /* Nominal data rate (Gb/s) */ + s64 tx_link_freq[1]; + + struct i2c_atr *atr; + + struct { + u8 rxport; + u8 txport; + u8 indirect_target; + } reg_current; + + bool streaming; + + u8 stored_fwd_ctl; + + u64 stream_enable_mask[UB960_MAX_NPORTS]; + + /* These are common to all ports */ + struct { + bool manual; + + s8 min; + s8 max; + } strobe; +}; + +static inline struct ub960_data *sd_to_ub960(struct v4l2_subdev *sd) +{ + return container_of(sd, struct ub960_data, sd); +} + +static inline bool ub960_pad_is_sink(struct ub960_data *priv, u32 pad) +{ + return pad < priv->hw_data->num_rxports; +} + +static inline bool ub960_pad_is_source(struct ub960_data *priv, u32 pad) +{ + return pad >= priv->hw_data->num_rxports; +} + +static inline unsigned int ub960_pad_to_port(struct ub960_data *priv, u32 pad) +{ + if (ub960_pad_is_sink(priv, pad)) + return pad; + else + return pad - priv->hw_data->num_rxports; +} + +struct ub960_format_info { + u32 code; + u32 bpp; + u8 datatype; + bool meta; +}; + +static const struct ub960_format_info ub960_formats[] = { + { .code = MEDIA_BUS_FMT_YUYV8_1X16, .bpp = 16, .datatype = MIPI_CSI2_DT_YUV422_8B, }, + { .code = MEDIA_BUS_FMT_UYVY8_1X16, .bpp = 16, .datatype = MIPI_CSI2_DT_YUV422_8B, }, + { .code = MEDIA_BUS_FMT_VYUY8_1X16, .bpp = 16, .datatype = MIPI_CSI2_DT_YUV422_8B, }, + { .code = MEDIA_BUS_FMT_YVYU8_1X16, .bpp = 16, .datatype = MIPI_CSI2_DT_YUV422_8B, }, + + { .code = MEDIA_BUS_FMT_SBGGR12_1X12, .bpp = 12, .datatype = MIPI_CSI2_DT_RAW12, }, + { .code = MEDIA_BUS_FMT_SGBRG12_1X12, .bpp = 12, .datatype = MIPI_CSI2_DT_RAW12, }, + { .code = MEDIA_BUS_FMT_SGRBG12_1X12, .bpp = 12, .datatype = MIPI_CSI2_DT_RAW12, }, + { .code = MEDIA_BUS_FMT_SRGGB12_1X12, .bpp = 12, .datatype = MIPI_CSI2_DT_RAW12, }, +}; + +static const struct ub960_format_info *ub960_find_format(u32 code) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(ub960_formats); i++) { + if (ub960_formats[i].code == code) + return &ub960_formats[i]; + } + + return NULL; +} + +/* ----------------------------------------------------------------------------- + * Basic device access + */ + +static int ub960_read(struct ub960_data *priv, u8 reg, u8 *val) +{ + struct device *dev = &priv->client->dev; + unsigned int v; + int ret; + + mutex_lock(&priv->reg_lock); + + ret = regmap_read(priv->regmap, reg, &v); + if (ret) { + dev_err(dev, "%s: cannot read register 0x%02x (%d)!\n", + __func__, reg, ret); + goto out_unlock; + } + + *val = v; + +out_unlock: + mutex_unlock(&priv->reg_lock); + + return ret; +} + +static int ub960_write(struct ub960_data *priv, u8 reg, u8 val) +{ + struct device *dev = &priv->client->dev; + int ret; + + mutex_lock(&priv->reg_lock); + + ret = regmap_write(priv->regmap, reg, val); + if (ret) + dev_err(dev, "%s: cannot write register 0x%02x (%d)!\n", + __func__, reg, ret); + + mutex_unlock(&priv->reg_lock); + + return ret; +} + +static int ub960_update_bits(struct ub960_data *priv, u8 reg, u8 mask, u8 val) +{ + struct device *dev = &priv->client->dev; + int ret; + + mutex_lock(&priv->reg_lock); + + ret = regmap_update_bits(priv->regmap, reg, mask, val); + if (ret) + dev_err(dev, "%s: cannot update register 0x%02x (%d)!\n", + __func__, reg, ret); + + mutex_unlock(&priv->reg_lock); + + return ret; +} + +static int ub960_read16(struct ub960_data *priv, u8 reg, u16 *val) +{ + struct device *dev = &priv->client->dev; + __be16 __v; + int ret; + + mutex_lock(&priv->reg_lock); + + ret = regmap_bulk_read(priv->regmap, reg, &__v, sizeof(__v)); + if (ret) { + dev_err(dev, "%s: cannot read register 0x%02x (%d)!\n", + __func__, reg, ret); + goto out_unlock; + } + + *val = be16_to_cpu(__v); + +out_unlock: + mutex_unlock(&priv->reg_lock); + + return ret; +} + +static int ub960_rxport_select(struct ub960_data *priv, u8 nport) +{ + struct device *dev = &priv->client->dev; + int ret; + + lockdep_assert_held(&priv->reg_lock); + + if (priv->reg_current.rxport == nport) + return 0; + + ret = regmap_write(priv->regmap, UB960_SR_FPD3_PORT_SEL, + (nport << 4) | BIT(nport)); + if (ret) { + dev_err(dev, "%s: cannot select rxport %d (%d)!\n", __func__, + nport, ret); + return ret; + } + + priv->reg_current.rxport = nport; + + return 0; +} + +static int ub960_rxport_read(struct ub960_data *priv, u8 nport, u8 reg, u8 *val) +{ + struct device *dev = &priv->client->dev; + unsigned int v; + int ret; + + mutex_lock(&priv->reg_lock); + + ret = ub960_rxport_select(priv, nport); + if (ret) + goto out_unlock; + + ret = regmap_read(priv->regmap, reg, &v); + if (ret) { + dev_err(dev, "%s: cannot read register 0x%02x (%d)!\n", + __func__, reg, ret); + goto out_unlock; + } + + *val = v; + +out_unlock: + mutex_unlock(&priv->reg_lock); + + return ret; +} + +static int ub960_rxport_write(struct ub960_data *priv, u8 nport, u8 reg, u8 val) +{ + struct device *dev = &priv->client->dev; + int ret; + + mutex_lock(&priv->reg_lock); + + ret = ub960_rxport_select(priv, nport); + if (ret) + goto out_unlock; + + ret = regmap_write(priv->regmap, reg, val); + if (ret) + dev_err(dev, "%s: cannot write register 0x%02x (%d)!\n", + __func__, reg, ret); + +out_unlock: + mutex_unlock(&priv->reg_lock); + + return ret; +} + +static int ub960_rxport_update_bits(struct ub960_data *priv, u8 nport, u8 reg, + u8 mask, u8 val) +{ + struct device *dev = &priv->client->dev; + int ret; + + mutex_lock(&priv->reg_lock); + + ret = ub960_rxport_select(priv, nport); + if (ret) + goto out_unlock; + + ret = regmap_update_bits(priv->regmap, reg, mask, val); + if (ret) + dev_err(dev, "%s: cannot update register 0x%02x (%d)!\n", + __func__, reg, ret); + +out_unlock: + mutex_unlock(&priv->reg_lock); + + return ret; +} + +static int ub960_rxport_read16(struct ub960_data *priv, u8 nport, u8 reg, + u16 *val) +{ + struct device *dev = &priv->client->dev; + __be16 __v; + int ret; + + mutex_lock(&priv->reg_lock); + + ret = ub960_rxport_select(priv, nport); + if (ret) + goto out_unlock; + + ret = regmap_bulk_read(priv->regmap, reg, &__v, sizeof(__v)); + if (ret) { + dev_err(dev, "%s: cannot read register 0x%02x (%d)!\n", + __func__, reg, ret); + goto out_unlock; + } + + *val = be16_to_cpu(__v); + +out_unlock: + mutex_unlock(&priv->reg_lock); + + return ret; +} + +static int ub960_txport_select(struct ub960_data *priv, u8 nport) +{ + struct device *dev = &priv->client->dev; + int ret; + + lockdep_assert_held(&priv->reg_lock); + + if (priv->reg_current.txport == nport) + return 0; + + ret = regmap_write(priv->regmap, UB960_SR_CSI_PORT_SEL, + (nport << 4) | BIT(nport)); + if (ret) { + dev_err(dev, "%s: cannot select tx port %d (%d)!\n", __func__, + nport, ret); + return ret; + } + + priv->reg_current.txport = nport; + + return 0; +} + +static int ub960_txport_read(struct ub960_data *priv, u8 nport, u8 reg, u8 *val) +{ + struct device *dev = &priv->client->dev; + unsigned int v; + int ret; + + mutex_lock(&priv->reg_lock); + + ret = ub960_txport_select(priv, nport); + if (ret) + goto out_unlock; + + ret = regmap_read(priv->regmap, reg, &v); + if (ret) { + dev_err(dev, "%s: cannot read register 0x%02x (%d)!\n", + __func__, reg, ret); + goto out_unlock; + } + + *val = v; + +out_unlock: + mutex_unlock(&priv->reg_lock); + + return ret; +} + +static int ub960_txport_write(struct ub960_data *priv, u8 nport, u8 reg, u8 val) +{ + struct device *dev = &priv->client->dev; + int ret; + + mutex_lock(&priv->reg_lock); + + ret = ub960_txport_select(priv, nport); + if (ret) + goto out_unlock; + + ret = regmap_write(priv->regmap, reg, val); + if (ret) + dev_err(dev, "%s: cannot write register 0x%02x (%d)!\n", + __func__, reg, ret); + +out_unlock: + mutex_unlock(&priv->reg_lock); + + return ret; +} + +static int ub960_txport_update_bits(struct ub960_data *priv, u8 nport, u8 reg, + u8 mask, u8 val) +{ + struct device *dev = &priv->client->dev; + int ret; + + mutex_lock(&priv->reg_lock); + + ret = ub960_txport_select(priv, nport); + if (ret) + goto out_unlock; + + ret = regmap_update_bits(priv->regmap, reg, mask, val); + if (ret) + dev_err(dev, "%s: cannot update register 0x%02x (%d)!\n", + __func__, reg, ret); + +out_unlock: + mutex_unlock(&priv->reg_lock); + + return ret; +} + +static int ub960_select_ind_reg_block(struct ub960_data *priv, u8 block) +{ + struct device *dev = &priv->client->dev; + int ret; + + lockdep_assert_held(&priv->reg_lock); + + if (priv->reg_current.indirect_target == block) + return 0; + + ret = regmap_write(priv->regmap, UB960_SR_IND_ACC_CTL, block << 2); + if (ret) { + dev_err(dev, "%s: cannot select indirect target %u (%d)!\n", + __func__, block, ret); + return ret; + } + + priv->reg_current.indirect_target = block; + + return 0; +} + +static int ub960_read_ind(struct ub960_data *priv, u8 block, u8 reg, u8 *val) +{ + struct device *dev = &priv->client->dev; + unsigned int v; + int ret; + + mutex_lock(&priv->reg_lock); + + ret = ub960_select_ind_reg_block(priv, block); + if (ret) + goto out_unlock; + + ret = regmap_write(priv->regmap, UB960_SR_IND_ACC_ADDR, reg); + if (ret) { + dev_err(dev, + "Write to IND_ACC_ADDR failed when reading %u:%x02x: %d\n", + block, reg, ret); + goto out_unlock; + } + + ret = regmap_read(priv->regmap, UB960_SR_IND_ACC_DATA, &v); + if (ret) { + dev_err(dev, + "Write to IND_ACC_DATA failed when reading %u:%x02x: %d\n", + block, reg, ret); + goto out_unlock; + } + + *val = v; + +out_unlock: + mutex_unlock(&priv->reg_lock); + + return ret; +} + +static int ub960_write_ind(struct ub960_data *priv, u8 block, u8 reg, u8 val) +{ + struct device *dev = &priv->client->dev; + int ret; + + mutex_lock(&priv->reg_lock); + + ret = ub960_select_ind_reg_block(priv, block); + if (ret) + goto out_unlock; + + ret = regmap_write(priv->regmap, UB960_SR_IND_ACC_ADDR, reg); + if (ret) { + dev_err(dev, + "Write to IND_ACC_ADDR failed when writing %u:%x02x: %d\n", + block, reg, ret); + goto out_unlock; + } + + ret = regmap_write(priv->regmap, UB960_SR_IND_ACC_DATA, val); + if (ret) { + dev_err(dev, + "Write to IND_ACC_DATA failed when writing %u:%x02x: %d\n", + block, reg, ret); + goto out_unlock; + } + +out_unlock: + mutex_unlock(&priv->reg_lock); + + return ret; +} + +static int ub960_ind_update_bits(struct ub960_data *priv, u8 block, u8 reg, + u8 mask, u8 val) +{ + struct device *dev = &priv->client->dev; + int ret; + + mutex_lock(&priv->reg_lock); + + ret = ub960_select_ind_reg_block(priv, block); + if (ret) + goto out_unlock; + + ret = regmap_write(priv->regmap, UB960_SR_IND_ACC_ADDR, reg); + if (ret) { + dev_err(dev, + "Write to IND_ACC_ADDR failed when updating %u:%x02x: %d\n", + block, reg, ret); + goto out_unlock; + } + + ret = regmap_update_bits(priv->regmap, UB960_SR_IND_ACC_DATA, mask, + val); + if (ret) { + dev_err(dev, + "Write to IND_ACC_DATA failed when updating %u:%x02x: %d\n", + block, reg, ret); + goto out_unlock; + } + +out_unlock: + mutex_unlock(&priv->reg_lock); + + return ret; +} + +/* ----------------------------------------------------------------------------- + * I2C-ATR (address translator) + */ + +static int ub960_atr_attach_client(struct i2c_atr *atr, u32 chan_id, + const struct i2c_client *client, u16 alias) +{ + struct ub960_data *priv = i2c_atr_get_driver_data(atr); + struct ub960_rxport *rxport = priv->rxports[chan_id]; + struct device *dev = &priv->client->dev; + unsigned int reg_idx; + + for (reg_idx = 0; reg_idx < ARRAY_SIZE(rxport->aliased_clients); reg_idx++) { + if (!rxport->aliased_clients[reg_idx]) + break; + } + + if (reg_idx == ARRAY_SIZE(rxport->aliased_clients)) { + dev_err(dev, "rx%u: alias pool exhausted\n", rxport->nport); + return -EADDRNOTAVAIL; + } + + rxport->aliased_clients[reg_idx] = client; + + ub960_rxport_write(priv, chan_id, UB960_RR_SLAVE_ID(reg_idx), + client->addr << 1); + ub960_rxport_write(priv, chan_id, UB960_RR_SLAVE_ALIAS(reg_idx), + alias << 1); + + dev_dbg(dev, "rx%u: client 0x%02x assigned alias 0x%02x at slot %u\n", + rxport->nport, client->addr, alias, reg_idx); + + return 0; +} + +static void ub960_atr_detach_client(struct i2c_atr *atr, u32 chan_id, + const struct i2c_client *client) +{ + struct ub960_data *priv = i2c_atr_get_driver_data(atr); + struct ub960_rxport *rxport = priv->rxports[chan_id]; + struct device *dev = &priv->client->dev; + unsigned int reg_idx; + + for (reg_idx = 0; reg_idx < ARRAY_SIZE(rxport->aliased_clients); reg_idx++) { + if (rxport->aliased_clients[reg_idx] == client) + break; + } + + if (reg_idx == ARRAY_SIZE(rxport->aliased_clients)) { + dev_err(dev, "rx%u: client 0x%02x is not mapped!\n", + rxport->nport, client->addr); + return; + } + + rxport->aliased_clients[reg_idx] = NULL; + + ub960_rxport_write(priv, chan_id, UB960_RR_SLAVE_ALIAS(reg_idx), 0); + + dev_dbg(dev, "rx%u: client 0x%02x released at slot %u\n", rxport->nport, + client->addr, reg_idx); +} + +static const struct i2c_atr_ops ub960_atr_ops = { + .attach_client = ub960_atr_attach_client, + .detach_client = ub960_atr_detach_client, +}; + +static int ub960_init_atr(struct ub960_data *priv) +{ + struct device *dev = &priv->client->dev; + struct i2c_adapter *parent_adap = priv->client->adapter; + + priv->atr = i2c_atr_new(parent_adap, dev, &ub960_atr_ops, + priv->hw_data->num_rxports); + if (IS_ERR(priv->atr)) + return PTR_ERR(priv->atr); + + i2c_atr_set_driver_data(priv->atr, priv); + + return 0; +} + +static void ub960_uninit_atr(struct ub960_data *priv) +{ + i2c_atr_delete(priv->atr); + priv->atr = NULL; +} + +/* ----------------------------------------------------------------------------- + * TX ports + */ + +static int ub960_parse_dt_txport(struct ub960_data *priv, + struct fwnode_handle *ep_fwnode, + u8 nport) +{ + struct device *dev = &priv->client->dev; + struct v4l2_fwnode_endpoint vep = {}; + struct ub960_txport *txport; + int ret; + + txport = kzalloc(sizeof(*txport), GFP_KERNEL); + if (!txport) + return -ENOMEM; + + txport->priv = priv; + txport->nport = nport; + + vep.bus_type = V4L2_MBUS_CSI2_DPHY; + ret = v4l2_fwnode_endpoint_alloc_parse(ep_fwnode, &vep); + if (ret) { + dev_err(dev, "tx%u: failed to parse endpoint data\n", nport); + goto err_free_txport; + } + + txport->num_data_lanes = vep.bus.mipi_csi2.num_data_lanes; + + if (vep.nr_of_link_frequencies != 1) { + ret = -EINVAL; + goto err_free_vep; + } + + priv->tx_link_freq[0] = vep.link_frequencies[0]; + priv->tx_data_rate = priv->tx_link_freq[0] * 2; + + if (priv->tx_data_rate != MHZ(1600) && + priv->tx_data_rate != MHZ(1200) && + priv->tx_data_rate != MHZ(800) && + priv->tx_data_rate != MHZ(400)) { + dev_err(dev, "tx%u: invalid 'link-frequencies' value\n", nport); + ret = -EINVAL; + goto err_free_vep; + } + + v4l2_fwnode_endpoint_free(&vep); + + priv->txports[nport] = txport; + + return 0; + +err_free_vep: + v4l2_fwnode_endpoint_free(&vep); +err_free_txport: + kfree(txport); + + return ret; +} + +static void ub960_csi_handle_events(struct ub960_data *priv, u8 nport) +{ + struct device *dev = &priv->client->dev; + u8 csi_tx_isr; + int ret; + + ret = ub960_txport_read(priv, nport, UB960_TR_CSI_TX_ISR, &csi_tx_isr); + if (ret) + return; + + if (csi_tx_isr & UB960_TR_CSI_TX_ISR_IS_CSI_SYNC_ERROR) + dev_warn(dev, "TX%u: CSI_SYNC_ERROR\n", nport); + + if (csi_tx_isr & UB960_TR_CSI_TX_ISR_IS_CSI_PASS_ERROR) + dev_warn(dev, "TX%u: CSI_PASS_ERROR\n", nport); +} + +/* ----------------------------------------------------------------------------- + * RX ports + */ + +static int ub960_rxport_enable_vpocs(struct ub960_data *priv) +{ + unsigned int nport; + int ret; + + for (nport = 0; nport < priv->hw_data->num_rxports; nport++) { + struct ub960_rxport *rxport = priv->rxports[nport]; + + if (!rxport || !rxport->vpoc) + continue; + + ret = regulator_enable(rxport->vpoc); + if (ret) + goto err_disable_vpocs; + } + + return 0; + +err_disable_vpocs: + while (nport--) { + struct ub960_rxport *rxport = priv->rxports[nport]; + + if (!rxport || !rxport->vpoc) + continue; + + regulator_disable(rxport->vpoc); + } + + return ret; +} + +static void ub960_rxport_disable_vpocs(struct ub960_data *priv) +{ + unsigned int nport; + + for (nport = 0; nport < priv->hw_data->num_rxports; nport++) { + struct ub960_rxport *rxport = priv->rxports[nport]; + + if (!rxport || !rxport->vpoc) + continue; + + regulator_disable(rxport->vpoc); + } +} + +static void ub960_rxport_clear_errors(struct ub960_data *priv, + unsigned int nport) +{ + u8 v; + + ub960_rxport_read(priv, nport, UB960_RR_RX_PORT_STS1, &v); + ub960_rxport_read(priv, nport, UB960_RR_RX_PORT_STS2, &v); + ub960_rxport_read(priv, nport, UB960_RR_CSI_RX_STS, &v); + ub960_rxport_read(priv, nport, UB960_RR_BCC_STATUS, &v); + + ub960_rxport_read(priv, nport, UB960_RR_RX_PAR_ERR_HI, &v); + ub960_rxport_read(priv, nport, UB960_RR_RX_PAR_ERR_LO, &v); + + ub960_rxport_read(priv, nport, UB960_RR_CSI_ERR_COUNTER, &v); +} + +static void ub960_clear_rx_errors(struct ub960_data *priv) +{ + unsigned int nport; + + for (nport = 0; nport < priv->hw_data->num_rxports; nport++) + ub960_rxport_clear_errors(priv, nport); +} + +static int ub960_rxport_get_strobe_pos(struct ub960_data *priv, + unsigned int nport, s8 *strobe_pos) +{ + u8 v; + u8 clk_delay, data_delay; + int ret; + + ub960_read_ind(priv, UB960_IND_TARGET_RX_ANA(nport), + UB960_IR_RX_ANA_STROBE_SET_CLK, &v); + + clk_delay = (v & UB960_IR_RX_ANA_STROBE_SET_CLK_NO_EXTRA_DELAY) ? + 0 : UB960_MANUAL_STROBE_EXTRA_DELAY; + + ub960_read_ind(priv, UB960_IND_TARGET_RX_ANA(nport), + UB960_IR_RX_ANA_STROBE_SET_DATA, &v); + + data_delay = (v & UB960_IR_RX_ANA_STROBE_SET_DATA_NO_EXTRA_DELAY) ? + 0 : UB960_MANUAL_STROBE_EXTRA_DELAY; + + ret = ub960_rxport_read(priv, nport, UB960_RR_SFILTER_STS_0, &v); + if (ret) + return ret; + + clk_delay += v & UB960_IR_RX_ANA_STROBE_SET_CLK_DELAY_MASK; + + ub960_rxport_read(priv, nport, UB960_RR_SFILTER_STS_1, &v); + if (ret) + return ret; + + data_delay += v & UB960_IR_RX_ANA_STROBE_SET_DATA_DELAY_MASK; + + *strobe_pos = data_delay - clk_delay; + + return 0; +} + +static void ub960_rxport_set_strobe_pos(struct ub960_data *priv, + unsigned int nport, s8 strobe_pos) +{ + u8 clk_delay, data_delay; + + clk_delay = UB960_IR_RX_ANA_STROBE_SET_CLK_NO_EXTRA_DELAY; + data_delay = UB960_IR_RX_ANA_STROBE_SET_DATA_NO_EXTRA_DELAY; + + if (strobe_pos < UB960_MIN_AEQ_STROBE_POS) + clk_delay = abs(strobe_pos) - UB960_MANUAL_STROBE_EXTRA_DELAY; + else if (strobe_pos > UB960_MAX_AEQ_STROBE_POS) + data_delay = strobe_pos - UB960_MANUAL_STROBE_EXTRA_DELAY; + else if (strobe_pos < 0) + clk_delay = abs(strobe_pos) | UB960_IR_RX_ANA_STROBE_SET_CLK_NO_EXTRA_DELAY; + else if (strobe_pos > 0) + data_delay = strobe_pos | UB960_IR_RX_ANA_STROBE_SET_DATA_NO_EXTRA_DELAY; + + ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), + UB960_IR_RX_ANA_STROBE_SET_CLK, clk_delay); + + ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), + UB960_IR_RX_ANA_STROBE_SET_DATA, data_delay); +} + +static void ub960_rxport_set_strobe_range(struct ub960_data *priv, + s8 strobe_min, s8 strobe_max) +{ + /* Convert the signed strobe pos to positive zero based value */ + strobe_min -= UB960_MIN_AEQ_STROBE_POS; + strobe_max -= UB960_MIN_AEQ_STROBE_POS; + + ub960_write(priv, UB960_XR_SFILTER_CFG, + ((u8)strobe_min << UB960_XR_SFILTER_CFG_SFILTER_MIN_SHIFT) | + ((u8)strobe_max << UB960_XR_SFILTER_CFG_SFILTER_MAX_SHIFT)); +} + +static int ub960_rxport_get_eq_level(struct ub960_data *priv, + unsigned int nport, u8 *eq_level) +{ + int ret; + u8 v; + + ret = ub960_rxport_read(priv, nport, UB960_RR_AEQ_STATUS, &v); + if (ret) + return ret; + + *eq_level = (v & UB960_RR_AEQ_STATUS_STATUS_1) + + (v & UB960_RR_AEQ_STATUS_STATUS_2); + + return 0; +} + +static void ub960_rxport_set_eq_level(struct ub960_data *priv, + unsigned int nport, u8 eq_level) +{ + u8 eq_stage_1_select_value, eq_stage_2_select_value; + const unsigned int eq_stage_max = 7; + u8 v; + + if (eq_level <= eq_stage_max) { + eq_stage_1_select_value = eq_level; + eq_stage_2_select_value = 0; + } else { + eq_stage_1_select_value = eq_stage_max; + eq_stage_2_select_value = eq_level - eq_stage_max; + } + + ub960_rxport_read(priv, nport, UB960_RR_AEQ_BYPASS, &v); + + v &= ~(UB960_RR_AEQ_BYPASS_EQ_STAGE1_VALUE_MASK | + UB960_RR_AEQ_BYPASS_EQ_STAGE2_VALUE_MASK); + v |= eq_stage_1_select_value << UB960_RR_AEQ_BYPASS_EQ_STAGE1_VALUE_SHIFT; + v |= eq_stage_2_select_value << UB960_RR_AEQ_BYPASS_EQ_STAGE2_VALUE_SHIFT; + v |= UB960_RR_AEQ_BYPASS_ENABLE; + + ub960_rxport_write(priv, nport, UB960_RR_AEQ_BYPASS, v); +} + +static void ub960_rxport_set_eq_range(struct ub960_data *priv, + unsigned int nport, u8 eq_min, u8 eq_max) +{ + ub960_rxport_write(priv, nport, UB960_RR_AEQ_MIN_MAX, + (eq_min << UB960_RR_AEQ_MIN_MAX_AEQ_FLOOR_SHIFT) | + (eq_max << UB960_RR_AEQ_MIN_MAX_AEQ_MAX_SHIFT)); + + /* Enable AEQ min setting */ + ub960_rxport_update_bits(priv, nport, UB960_RR_AEQ_CTL2, + UB960_RR_AEQ_CTL2_SET_AEQ_FLOOR, + UB960_RR_AEQ_CTL2_SET_AEQ_FLOOR); +} + +static void ub960_rxport_config_eq(struct ub960_data *priv, unsigned int nport) +{ + struct ub960_rxport *rxport = priv->rxports[nport]; + + /* We also set common settings here. Should be moved elsewhere. */ + + if (priv->strobe.manual) { + /* Disable AEQ_SFILTER_EN */ + ub960_update_bits(priv, UB960_XR_AEQ_CTL1, + UB960_XR_AEQ_CTL1_AEQ_SFILTER_EN, 0); + } else { + /* Enable SFILTER and error control */ + ub960_write(priv, UB960_XR_AEQ_CTL1, + UB960_XR_AEQ_CTL1_AEQ_ERR_CTL_MASK | + UB960_XR_AEQ_CTL1_AEQ_SFILTER_EN); + + /* Set AEQ strobe range */ + ub960_rxport_set_strobe_range(priv, priv->strobe.min, + priv->strobe.max); + } + + /* The rest are port specific */ + + if (priv->strobe.manual) + ub960_rxport_set_strobe_pos(priv, nport, rxport->eq.strobe_pos); + else + ub960_rxport_set_strobe_pos(priv, nport, 0); + + if (rxport->eq.manual_eq) { + ub960_rxport_set_eq_level(priv, nport, + rxport->eq.manual.eq_level); + + /* Enable AEQ Bypass */ + ub960_rxport_update_bits(priv, nport, UB960_RR_AEQ_BYPASS, + UB960_RR_AEQ_BYPASS_ENABLE, + UB960_RR_AEQ_BYPASS_ENABLE); + } else { + ub960_rxport_set_eq_range(priv, nport, + rxport->eq.aeq.eq_level_min, + rxport->eq.aeq.eq_level_max); + + /* Disable AEQ Bypass */ + ub960_rxport_update_bits(priv, nport, UB960_RR_AEQ_BYPASS, + UB960_RR_AEQ_BYPASS_ENABLE, 0); + } +} + +static int ub960_rxport_link_ok(struct ub960_data *priv, unsigned int nport, + bool *ok) +{ + u8 rx_port_sts1, rx_port_sts2; + u16 parity_errors; + u8 csi_rx_sts; + u8 csi_err_cnt; + u8 bcc_sts; + int ret; + bool errors; + + ret = ub960_rxport_read(priv, nport, UB960_RR_RX_PORT_STS1, + &rx_port_sts1); + if (ret) + return ret; + + if (!(rx_port_sts1 & UB960_RR_RX_PORT_STS1_LOCK_STS)) { + *ok = false; + return 0; + } + + ret = ub960_rxport_read(priv, nport, UB960_RR_RX_PORT_STS2, + &rx_port_sts2); + if (ret) + return ret; + + ret = ub960_rxport_read(priv, nport, UB960_RR_CSI_RX_STS, &csi_rx_sts); + if (ret) + return ret; + + ret = ub960_rxport_read(priv, nport, UB960_RR_CSI_ERR_COUNTER, + &csi_err_cnt); + if (ret) + return ret; + + ret = ub960_rxport_read(priv, nport, UB960_RR_BCC_STATUS, &bcc_sts); + if (ret) + return ret; + + ret = ub960_rxport_read16(priv, nport, UB960_RR_RX_PAR_ERR_HI, + &parity_errors); + if (ret) + return ret; + + errors = (rx_port_sts1 & UB960_RR_RX_PORT_STS1_ERROR_MASK) || + (rx_port_sts2 & UB960_RR_RX_PORT_STS2_ERROR_MASK) || + (bcc_sts & UB960_RR_BCC_STATUS_ERROR_MASK) || + (csi_rx_sts & UB960_RR_CSI_RX_STS_ERROR_MASK) || csi_err_cnt || + parity_errors; + + *ok = !errors; + + return 0; +} + +/* + * Wait for the RX ports to lock, have no errors and have stable strobe position + * and EQ level. + */ +static int ub960_rxport_wait_locks(struct ub960_data *priv, + unsigned long port_mask, + unsigned int *lock_mask) +{ + struct device *dev = &priv->client->dev; + unsigned long timeout; + unsigned int link_ok_mask; + unsigned int missing; + unsigned int loops; + u8 nport; + int ret; + + if (port_mask == 0) { + if (lock_mask) + *lock_mask = 0; + return 0; + } + + if (port_mask >= BIT(priv->hw_data->num_rxports)) + return -EINVAL; + + timeout = jiffies + msecs_to_jiffies(1000); + loops = 0; + link_ok_mask = 0; + + while (time_before(jiffies, timeout)) { + missing = 0; + + for_each_set_bit(nport, &port_mask, + priv->hw_data->num_rxports) { + struct ub960_rxport *rxport = priv->rxports[nport]; + bool ok; + + if (!rxport) + continue; + + ret = ub960_rxport_link_ok(priv, nport, &ok); + if (ret) + return ret; + + /* + * We want the link to be ok for two consecutive loops, + * as a link could get established just before our test + * and drop soon after. + */ + if (!ok || !(link_ok_mask & BIT(nport))) + missing++; + + if (ok) + link_ok_mask |= BIT(nport); + else + link_ok_mask &= ~BIT(nport); + } + + loops++; + + if (missing == 0) + break; + + msleep(50); + } + + if (lock_mask) + *lock_mask = link_ok_mask; + + dev_dbg(dev, "Wait locks done in %u loops\n", loops); + for_each_set_bit(nport, &port_mask, priv->hw_data->num_rxports) { + struct ub960_rxport *rxport = priv->rxports[nport]; + s8 strobe_pos, eq_level; + u16 v; + + if (!rxport) + continue; + + if (!(link_ok_mask & BIT(nport))) { + dev_dbg(dev, "\trx%u: not locked\n", nport); + continue; + } + + ub960_rxport_read16(priv, nport, UB960_RR_RX_FREQ_HIGH, &v); + + ret = ub960_rxport_get_strobe_pos(priv, nport, &strobe_pos); + if (ret) + return ret; + + ret = ub960_rxport_get_eq_level(priv, nport, &eq_level); + if (ret) + return ret; + + dev_dbg(dev, "\trx%u: locked, SP: %d, EQ: %u, freq %llu Hz\n", + nport, strobe_pos, eq_level, (v * 1000000ULL) >> 8); + } + + return 0; +} + +static unsigned long ub960_calc_bc_clk_rate_ub960(struct ub960_data *priv, + struct ub960_rxport *rxport) +{ + unsigned int mult; + unsigned int div; + + switch (rxport->rx_mode) { + case RXPORT_MODE_RAW10: + case RXPORT_MODE_RAW12_HF: + case RXPORT_MODE_RAW12_LF: + mult = 1; + div = 10; + break; + + case RXPORT_MODE_CSI2_SYNC: + mult = 2; + div = 1; + break; + + case RXPORT_MODE_CSI2_ASYNC: + mult = 2; + div = 5; + break; + + default: + return 0; + } + + return clk_get_rate(priv->refclk) * mult / div; +} + +static unsigned long ub960_calc_bc_clk_rate_ub9702(struct ub960_data *priv, + struct ub960_rxport *rxport) +{ + switch (rxport->rx_mode) { + case RXPORT_MODE_RAW10: + case RXPORT_MODE_RAW12_HF: + case RXPORT_MODE_RAW12_LF: + return 2359400; + + case RXPORT_MODE_CSI2_SYNC: + return 47187500; + + case RXPORT_MODE_CSI2_ASYNC: + return 9437500; + + default: + return 0; + } +} + +static int ub960_rxport_add_serializer(struct ub960_data *priv, u8 nport) +{ + struct ub960_rxport *rxport = priv->rxports[nport]; + struct device *dev = &priv->client->dev; + struct ds90ub9xx_platform_data *ser_pdata = &rxport->ser.pdata; + struct i2c_board_info ser_info = { + .of_node = to_of_node(rxport->ser.fwnode), + .fwnode = rxport->ser.fwnode, + .platform_data = ser_pdata, + }; + + ser_pdata->port = nport; + ser_pdata->atr = priv->atr; + if (priv->hw_data->is_ub9702) + ser_pdata->bc_rate = ub960_calc_bc_clk_rate_ub9702(priv, rxport); + else + ser_pdata->bc_rate = ub960_calc_bc_clk_rate_ub960(priv, rxport); + + /* + * The serializer is added under the same i2c adapter as the + * deserializer. This is not quite right, as the serializer is behind + * the FPD-Link. + */ + ser_info.addr = rxport->ser.alias; + rxport->ser.client = + i2c_new_client_device(priv->client->adapter, &ser_info); + if (!rxport->ser.client) { + dev_err(dev, "rx%u: cannot add %s i2c device", nport, + ser_info.type); + return -EIO; + } + + dev_dbg(dev, "rx%u: remote serializer at alias 0x%02x (%u-%04x)\n", + nport, rxport->ser.client->addr, + rxport->ser.client->adapter->nr, rxport->ser.client->addr); + + return 0; +} + +static void ub960_rxport_remove_serializer(struct ub960_data *priv, u8 nport) +{ + struct ub960_rxport *rxport = priv->rxports[nport]; + + i2c_unregister_device(rxport->ser.client); + rxport->ser.client = NULL; +} + +/* Add serializer i2c devices for all initialized ports */ +static int ub960_rxport_add_serializers(struct ub960_data *priv) +{ + unsigned int nport; + int ret; + + for (nport = 0; nport < priv->hw_data->num_rxports; nport++) { + struct ub960_rxport *rxport = priv->rxports[nport]; + + if (!rxport) + continue; + + ret = ub960_rxport_add_serializer(priv, nport); + if (ret) + goto err_remove_sers; + } + + return 0; + +err_remove_sers: + while (nport--) { + struct ub960_rxport *rxport = priv->rxports[nport]; + + if (!rxport) + continue; + + ub960_rxport_remove_serializer(priv, nport); + } + + return ret; +} + +static void ub960_rxport_remove_serializers(struct ub960_data *priv) +{ + unsigned int nport; + + for (nport = 0; nport < priv->hw_data->num_rxports; nport++) { + struct ub960_rxport *rxport = priv->rxports[nport]; + + if (!rxport) + continue; + + ub960_rxport_remove_serializer(priv, nport); + } +} + +static void ub960_init_tx_port(struct ub960_data *priv, + struct ub960_txport *txport) +{ + unsigned int nport = txport->nport; + u8 csi_ctl = 0; + + /* + * From the datasheet: "initial CSI Skew-Calibration + * sequence [...] should be set when operating at 1.6 Gbps" + */ + if (priv->tx_data_rate == MHZ(1600)) + csi_ctl |= UB960_TR_CSI_CTL_CSI_CAL_EN; + + csi_ctl |= (4 - txport->num_data_lanes) << 4; + + ub960_txport_write(priv, nport, UB960_TR_CSI_CTL, csi_ctl); +} + +static int ub960_init_tx_ports(struct ub960_data *priv) +{ + unsigned int nport; + u8 speed_select; + u8 pll_div; + + /* TX ports */ + + switch (priv->tx_data_rate) { + case MHZ(1600): + default: + speed_select = 0; + pll_div = 0x10; + break; + case MHZ(1200): + speed_select = 1; + break; + case MHZ(800): + speed_select = 2; + pll_div = 0x10; + break; + case MHZ(400): + speed_select = 3; + pll_div = 0x10; + break; + } + + ub960_write(priv, UB960_SR_CSI_PLL_CTL, speed_select); + + if (priv->hw_data->is_ub9702) { + ub960_write(priv, UB960_SR_CSI_PLL_DIV, pll_div); + + switch (priv->tx_data_rate) { + case MHZ(1600): + default: + ub960_write_ind(priv, UB960_IND_TARGET_CSI_ANA, 0x92, 0x80); + ub960_write_ind(priv, UB960_IND_TARGET_CSI_ANA, 0x4b, 0x2a); + break; + case MHZ(800): + ub960_write_ind(priv, UB960_IND_TARGET_CSI_ANA, 0x92, 0x90); + ub960_write_ind(priv, UB960_IND_TARGET_CSI_ANA, 0x4f, 0x2a); + ub960_write_ind(priv, UB960_IND_TARGET_CSI_ANA, 0x4b, 0x2a); + break; + case MHZ(400): + ub960_write_ind(priv, UB960_IND_TARGET_CSI_ANA, 0x92, 0xa0); + break; + } + } + + for (nport = 0; nport < priv->hw_data->num_txports; nport++) { + struct ub960_txport *txport = priv->txports[nport]; + + if (!txport) + continue; + + ub960_init_tx_port(priv, txport); + } + + return 0; +} + +static void ub960_init_rx_port_ub960(struct ub960_data *priv, + struct ub960_rxport *rxport) +{ + unsigned int nport = rxport->nport; + u32 bc_freq_val; + + /* + * Back channel frequency select. + * Override FREQ_SELECT from the strap. + * 0 - 2.5 Mbps (DS90UB913A-Q1 / DS90UB933-Q1) + * 2 - 10 Mbps + * 6 - 50 Mbps (DS90UB953-Q1) + * + * Note that changing this setting will result in some errors on the back + * channel for a short period of time. + */ + + switch (rxport->rx_mode) { + case RXPORT_MODE_RAW10: + case RXPORT_MODE_RAW12_HF: + case RXPORT_MODE_RAW12_LF: + bc_freq_val = 0; + break; + + case RXPORT_MODE_CSI2_ASYNC: + bc_freq_val = 2; + break; + + case RXPORT_MODE_CSI2_SYNC: + bc_freq_val = 6; + break; + + default: + return; + } + + ub960_rxport_update_bits(priv, nport, UB960_RR_BCC_CONFIG, + UB960_RR_BCC_CONFIG_BC_FREQ_SEL_MASK, + bc_freq_val); + + switch (rxport->rx_mode) { + case RXPORT_MODE_RAW10: + /* FPD3_MODE = RAW10 Mode (DS90UB913A-Q1 / DS90UB933-Q1 compatible) */ + ub960_rxport_update_bits(priv, nport, UB960_RR_PORT_CONFIG, + UB960_RR_PORT_CONFIG_FPD3_MODE_MASK, + 0x3); + + /* + * RAW10_8BIT_CTL = 0b10 : 8-bit processing using upper 8 bits + */ + ub960_rxport_update_bits(priv, nport, UB960_RR_PORT_CONFIG2, + UB960_RR_PORT_CONFIG2_RAW10_8BIT_CTL_MASK, + 0x2 << UB960_RR_PORT_CONFIG2_RAW10_8BIT_CTL_SHIFT); + + break; + + case RXPORT_MODE_RAW12_HF: + case RXPORT_MODE_RAW12_LF: + /* Not implemented */ + return; + + case RXPORT_MODE_CSI2_SYNC: + case RXPORT_MODE_CSI2_ASYNC: + /* CSI-2 Mode (DS90UB953-Q1 compatible) */ + ub960_rxport_update_bits(priv, nport, UB960_RR_PORT_CONFIG, 0x3, + 0x0); + + break; + } + + /* LV_POLARITY & FV_POLARITY */ + ub960_rxport_update_bits(priv, nport, UB960_RR_PORT_CONFIG2, 0x3, + rxport->lv_fv_pol); + + /* Enable all interrupt sources from this port */ + ub960_rxport_write(priv, nport, UB960_RR_PORT_ICR_HI, 0x07); + ub960_rxport_write(priv, nport, UB960_RR_PORT_ICR_LO, 0x7f); + + /* Enable I2C_PASS_THROUGH */ + ub960_rxport_update_bits(priv, nport, UB960_RR_BCC_CONFIG, + UB960_RR_BCC_CONFIG_I2C_PASS_THROUGH, + UB960_RR_BCC_CONFIG_I2C_PASS_THROUGH); + + /* Enable I2C communication to the serializer via the alias addr */ + ub960_rxport_write(priv, nport, UB960_RR_SER_ALIAS_ID, + rxport->ser.alias << 1); + + /* Configure EQ related settings */ + ub960_rxport_config_eq(priv, nport); + + /* Enable RX port */ + ub960_update_bits(priv, UB960_SR_RX_PORT_CTL, BIT(nport), BIT(nport)); +} + +static void ub960_init_rx_port_ub9702_fpd3(struct ub960_data *priv, + struct ub960_rxport *rxport) +{ + unsigned int nport = rxport->nport; + u8 bc_freq_val; + u8 fpd_func_mode; + + switch (rxport->rx_mode) { + case RXPORT_MODE_RAW10: + bc_freq_val = 0; + fpd_func_mode = 5; + break; + + case RXPORT_MODE_RAW12_HF: + bc_freq_val = 0; + fpd_func_mode = 4; + break; + + case RXPORT_MODE_RAW12_LF: + bc_freq_val = 0; + fpd_func_mode = 6; + break; + + case RXPORT_MODE_CSI2_SYNC: + bc_freq_val = 6; + fpd_func_mode = 2; + break; + + case RXPORT_MODE_CSI2_ASYNC: + bc_freq_val = 2; + fpd_func_mode = 2; + break; + + default: + return; + } + + ub960_rxport_update_bits(priv, nport, UB960_RR_BCC_CONFIG, 0x7, + bc_freq_val); + ub960_rxport_write(priv, nport, UB960_RR_CHANNEL_MODE, fpd_func_mode); + + /* set serdes_eq_mode = 1 */ + ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0xa8, 0x80); + + /* enable serdes driver */ + ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x0d, 0x7f); + + /* set serdes_eq_offset=4 */ + ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x2b, 0x04); + + /* init default serdes_eq_max in 0xa9 */ + ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0xa9, 0x23); + + /* init serdes_eq_min in 0xaa */ + ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0xaa, 0); + + /* serdes_driver_ctl2 control: DS90UB953-Q1/DS90UB933-Q1/DS90UB913A-Q1 */ + ub960_ind_update_bits(priv, UB960_IND_TARGET_RX_ANA(nport), 0x1b, + BIT(3), BIT(3)); + + /* RX port to half-rate */ + ub960_update_bits(priv, UB960_SR_FPD_RATE_CFG, 0x3 << (nport * 2), + BIT(nport * 2)); +} + +static void ub960_init_rx_port_ub9702_fpd4_aeq(struct ub960_data *priv, + struct ub960_rxport *rxport) +{ + unsigned int nport = rxport->nport; + bool first_time_power_up = true; + + if (first_time_power_up) { + u8 v; + + /* AEQ init */ + ub960_read_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x2c, &v); + + ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x27, v); + ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x28, v + 1); + + ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x2b, 0x00); + } + + /* enable serdes_eq_ctl2 */ + ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x9e, 0x00); + + /* enable serdes_eq_ctl1 */ + ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x90, 0x40); + + /* enable serdes_eq_en */ + ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x2e, 0x40); + + /* disable serdes_eq_override */ + ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0xf0, 0x00); + + /* disable serdes_gain_override */ + ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x71, 0x00); +} + +static void ub960_init_rx_port_ub9702_fpd4(struct ub960_data *priv, + struct ub960_rxport *rxport) +{ + unsigned int nport = rxport->nport; + u8 bc_freq_val; + + switch (rxport->rx_mode) { + case RXPORT_MODE_RAW10: + bc_freq_val = 0; + break; + + case RXPORT_MODE_RAW12_HF: + bc_freq_val = 0; + break; + + case RXPORT_MODE_RAW12_LF: + bc_freq_val = 0; + break; + + case RXPORT_MODE_CSI2_SYNC: + bc_freq_val = 6; + break; + + case RXPORT_MODE_CSI2_ASYNC: + bc_freq_val = 2; + break; + + default: + return; + } + + ub960_rxport_update_bits(priv, nport, UB960_RR_BCC_CONFIG, 0x7, + bc_freq_val); + + /* FPD4 Sync Mode */ + ub960_rxport_write(priv, nport, UB960_RR_CHANNEL_MODE, 0); + + /* add serdes_eq_offset of 4 */ + ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x2b, 0x04); + + /* FPD4 serdes_start_eq in 0x27: assign default */ + ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x27, 0x0); + /* FPD4 serdes_end_eq in 0x28: assign default */ + ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x28, 0x23); + + /* set serdes_driver_mode into FPD IV mode */ + ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x04, 0x00); + /* set FPD PBC drv into FPD IV mode */ + ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x1b, 0x00); + + /* set serdes_system_init to 0x2f */ + ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x21, 0x2f); + /* set serdes_system_rst in reset mode */ + ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x25, 0xc1); + + /* RX port to 7.55G mode */ + ub960_update_bits(priv, UB960_SR_FPD_RATE_CFG, 0x3 << (nport * 2), + 0 << (nport * 2)); + + ub960_init_rx_port_ub9702_fpd4_aeq(priv, rxport); +} + +static void ub960_init_rx_port_ub9702(struct ub960_data *priv, + struct ub960_rxport *rxport) +{ + unsigned int nport = rxport->nport; + + if (rxport->cdr_mode == RXPORT_CDR_FPD3) + ub960_init_rx_port_ub9702_fpd3(priv, rxport); + else /* RXPORT_CDR_FPD4 */ + ub960_init_rx_port_ub9702_fpd4(priv, rxport); + + switch (rxport->rx_mode) { + case RXPORT_MODE_RAW10: + /* + * RAW10_8BIT_CTL = 0b11 : 8-bit processing using lower 8 bits + * 0b10 : 8-bit processing using upper 8 bits + */ + ub960_rxport_update_bits(priv, nport, UB960_RR_PORT_CONFIG2, + 0x3 << 6, 0x2 << 6); + + break; + + case RXPORT_MODE_RAW12_HF: + case RXPORT_MODE_RAW12_LF: + /* Not implemented */ + return; + + case RXPORT_MODE_CSI2_SYNC: + case RXPORT_MODE_CSI2_ASYNC: + + break; + } + + /* LV_POLARITY & FV_POLARITY */ + ub960_rxport_update_bits(priv, nport, UB960_RR_PORT_CONFIG2, 0x3, + rxport->lv_fv_pol); + + /* Enable all interrupt sources from this port */ + ub960_rxport_write(priv, nport, UB960_RR_PORT_ICR_HI, 0x07); + ub960_rxport_write(priv, nport, UB960_RR_PORT_ICR_LO, 0x7f); + + /* Enable I2C_PASS_THROUGH */ + ub960_rxport_update_bits(priv, nport, UB960_RR_BCC_CONFIG, + UB960_RR_BCC_CONFIG_I2C_PASS_THROUGH, + UB960_RR_BCC_CONFIG_I2C_PASS_THROUGH); + + /* Enable I2C communication to the serializer via the alias addr */ + ub960_rxport_write(priv, nport, UB960_RR_SER_ALIAS_ID, + rxport->ser.alias << 1); + + /* Enable RX port */ + ub960_update_bits(priv, UB960_SR_RX_PORT_CTL, BIT(nport), BIT(nport)); + + if (rxport->cdr_mode == RXPORT_CDR_FPD4) { + /* unreset 960 AEQ */ + ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x25, 0x41); + } +} + +static int ub960_init_rx_ports(struct ub960_data *priv) +{ + unsigned int nport; + + for (nport = 0; nport < priv->hw_data->num_rxports; nport++) { + struct ub960_rxport *rxport = priv->rxports[nport]; + + if (!rxport) + continue; + + if (priv->hw_data->is_ub9702) + ub960_init_rx_port_ub9702(priv, rxport); + else + ub960_init_rx_port_ub960(priv, rxport); + } + + return 0; +} + +static void ub960_rxport_handle_events(struct ub960_data *priv, u8 nport) +{ + struct device *dev = &priv->client->dev; + u8 rx_port_sts1; + u8 rx_port_sts2; + u8 csi_rx_sts; + u8 bcc_sts; + int ret = 0; + + /* Read interrupts (also clears most of them) */ + if (!ret) + ret = ub960_rxport_read(priv, nport, UB960_RR_RX_PORT_STS1, + &rx_port_sts1); + if (!ret) + ret = ub960_rxport_read(priv, nport, UB960_RR_RX_PORT_STS2, + &rx_port_sts2); + if (!ret) + ret = ub960_rxport_read(priv, nport, UB960_RR_CSI_RX_STS, + &csi_rx_sts); + if (!ret) + ret = ub960_rxport_read(priv, nport, UB960_RR_BCC_STATUS, + &bcc_sts); + + if (ret) + return; + + if (rx_port_sts1 & UB960_RR_RX_PORT_STS1_PARITY_ERROR) { + u16 v; + + ret = ub960_rxport_read16(priv, nport, UB960_RR_RX_PAR_ERR_HI, + &v); + if (!ret) + dev_err(dev, "rx%u parity errors: %u\n", nport, v); + } + + if (rx_port_sts1 & UB960_RR_RX_PORT_STS1_BCC_CRC_ERROR) + dev_err(dev, "rx%u BCC CRC error\n", nport); + + if (rx_port_sts1 & UB960_RR_RX_PORT_STS1_BCC_SEQ_ERROR) + dev_err(dev, "rx%u BCC SEQ error\n", nport); + + if (rx_port_sts2 & UB960_RR_RX_PORT_STS2_LINE_LEN_UNSTABLE) + dev_err(dev, "rx%u line length unstable\n", nport); + + if (rx_port_sts2 & UB960_RR_RX_PORT_STS2_FPD3_ENCODE_ERROR) + dev_err(dev, "rx%u FPD3 encode error\n", nport); + + if (rx_port_sts2 & UB960_RR_RX_PORT_STS2_BUFFER_ERROR) + dev_err(dev, "rx%u buffer error\n", nport); + + if (csi_rx_sts) + dev_err(dev, "rx%u CSI error: %#02x\n", nport, csi_rx_sts); + + if (csi_rx_sts & UB960_RR_CSI_RX_STS_ECC1_ERR) + dev_err(dev, "rx%u CSI ECC1 error\n", nport); + + if (csi_rx_sts & UB960_RR_CSI_RX_STS_ECC2_ERR) + dev_err(dev, "rx%u CSI ECC2 error\n", nport); + + if (csi_rx_sts & UB960_RR_CSI_RX_STS_CKSUM_ERR) + dev_err(dev, "rx%u CSI checksum error\n", nport); + + if (csi_rx_sts & UB960_RR_CSI_RX_STS_LENGTH_ERR) + dev_err(dev, "rx%u CSI length error\n", nport); + + if (bcc_sts) + dev_err(dev, "rx%u BCC error: %#02x\n", nport, bcc_sts); + + if (bcc_sts & UB960_RR_BCC_STATUS_RESP_ERR) + dev_err(dev, "rx%u BCC response error", nport); + + if (bcc_sts & UB960_RR_BCC_STATUS_SLAVE_TO) + dev_err(dev, "rx%u BCC slave timeout", nport); + + if (bcc_sts & UB960_RR_BCC_STATUS_SLAVE_ERR) + dev_err(dev, "rx%u BCC slave error", nport); + + if (bcc_sts & UB960_RR_BCC_STATUS_MASTER_TO) + dev_err(dev, "rx%u BCC master timeout", nport); + + if (bcc_sts & UB960_RR_BCC_STATUS_MASTER_ERR) + dev_err(dev, "rx%u BCC master error", nport); + + if (bcc_sts & UB960_RR_BCC_STATUS_SEQ_ERROR) + dev_err(dev, "rx%u BCC sequence error", nport); + + if (rx_port_sts2 & UB960_RR_RX_PORT_STS2_LINE_LEN_CHG) { + u16 v; + + ret = ub960_rxport_read16(priv, nport, UB960_RR_LINE_LEN_1, &v); + if (!ret) + dev_dbg(dev, "rx%u line len changed: %u\n", nport, v); + } + + if (rx_port_sts2 & UB960_RR_RX_PORT_STS2_LINE_CNT_CHG) { + u16 v; + + ret = ub960_rxport_read16(priv, nport, UB960_RR_LINE_COUNT_HI, + &v); + if (!ret) + dev_dbg(dev, "rx%u line count changed: %u\n", nport, v); + } + + if (rx_port_sts1 & UB960_RR_RX_PORT_STS1_LOCK_STS_CHG) { + dev_dbg(dev, "rx%u: %s, %s, %s, %s\n", nport, + (rx_port_sts1 & UB960_RR_RX_PORT_STS1_LOCK_STS) ? + "locked" : + "unlocked", + (rx_port_sts1 & UB960_RR_RX_PORT_STS1_PORT_PASS) ? + "passed" : + "not passed", + (rx_port_sts2 & UB960_RR_RX_PORT_STS2_CABLE_FAULT) ? + "no clock" : + "clock ok", + (rx_port_sts2 & UB960_RR_RX_PORT_STS2_FREQ_STABLE) ? + "stable freq" : + "unstable freq"); + } +} + +/* ----------------------------------------------------------------------------- + * V4L2 + */ + +/* + * The current implementation only supports a simple VC mapping, where all VCs + * from a one RX port will be mapped to the same VC. Also, the hardware + * dictates that all streams from an RX port must go to a single TX port. + * + * This function decides the target VC numbers for each RX port with a simple + * algorithm, so that for each TX port, we get VC numbers starting from 0, + * and counting up. + * + * E.g. if all four RX ports are in use, of which the first two go to the + * first TX port and the secont two go to the second TX port, we would get + * the following VCs for the four RX ports: 0, 1, 0, 1. + * + * TODO: implement a more sophisticated VC mapping. As the driver cannot know + * what VCs the sinks expect (say, an FPGA with hardcoded VC routing), this + * probably needs to be somehow configurable. Device tree? + */ +static void ub960_get_vc_maps(struct ub960_data *priv, + struct v4l2_subdev_state *state, u8 *vc) +{ + u8 cur_vc[UB960_MAX_TX_NPORTS] = {}; + struct v4l2_subdev_route *route; + u8 handled_mask = 0; + + for_each_active_route(&state->routing, route) { + unsigned int rx, tx; + + rx = ub960_pad_to_port(priv, route->sink_pad); + if (BIT(rx) & handled_mask) + continue; + + tx = ub960_pad_to_port(priv, route->source_pad); + + vc[rx] = cur_vc[tx]++; + handled_mask |= BIT(rx); + } +} + +static int ub960_enable_tx_port(struct ub960_data *priv, unsigned int nport) +{ + struct device *dev = &priv->client->dev; + + dev_dbg(dev, "enable TX port %u\n", nport); + + return ub960_txport_update_bits(priv, nport, UB960_TR_CSI_CTL, + UB960_TR_CSI_CTL_CSI_ENABLE, + UB960_TR_CSI_CTL_CSI_ENABLE); +} + +static void ub960_disable_tx_port(struct ub960_data *priv, unsigned int nport) +{ + struct device *dev = &priv->client->dev; + + dev_dbg(dev, "disable TX port %u\n", nport); + + ub960_txport_update_bits(priv, nport, UB960_TR_CSI_CTL, + UB960_TR_CSI_CTL_CSI_ENABLE, 0); +} + +static int ub960_enable_rx_port(struct ub960_data *priv, unsigned int nport) +{ + struct device *dev = &priv->client->dev; + + dev_dbg(dev, "enable RX port %u\n", nport); + + /* Enable forwarding */ + return ub960_update_bits(priv, UB960_SR_FWD_CTL1, BIT(4 + nport), 0); +} + +static void ub960_disable_rx_port(struct ub960_data *priv, unsigned int nport) +{ + struct device *dev = &priv->client->dev; + + dev_dbg(dev, "disable RX port %u\n", nport); + + /* Disable forwarding */ + ub960_update_bits(priv, UB960_SR_FWD_CTL1, BIT(4 + nport), + BIT(4 + nport)); +} + +/* + * The driver only supports using a single VC for each source. This function + * checks that each source only provides streams using a single VC. + */ +static int ub960_validate_stream_vcs(struct ub960_data *priv) +{ + unsigned int nport; + unsigned int i; + + for (nport = 0; nport < priv->hw_data->num_rxports; nport++) { + struct ub960_rxport *rxport = priv->rxports[nport]; + struct v4l2_mbus_frame_desc desc; + int ret; + u8 vc; + + if (!rxport) + continue; + + ret = v4l2_subdev_call(rxport->source.sd, pad, get_frame_desc, + rxport->source.pad, &desc); + if (ret) + return ret; + + if (desc.type != V4L2_MBUS_FRAME_DESC_TYPE_CSI2) + continue; + + if (desc.num_entries == 0) + continue; + + vc = desc.entry[0].bus.csi2.vc; + + for (i = 1; i < desc.num_entries; i++) { + if (vc == desc.entry[i].bus.csi2.vc) + continue; + + dev_err(&priv->client->dev, + "rx%u: source with multiple virtual-channels is not supported\n", + nport); + return -ENODEV; + } + } + + return 0; +} + +static int ub960_configure_ports_for_streaming(struct ub960_data *priv, + struct v4l2_subdev_state *state) +{ + u8 fwd_ctl; + struct { + u32 num_streams; + u8 pixel_dt; + u8 meta_dt; + u32 meta_lines; + u32 tx_port; + } rx_data[UB960_MAX_RX_NPORTS] = {}; + u8 vc_map[UB960_MAX_RX_NPORTS] = {}; + struct v4l2_subdev_route *route; + unsigned int nport; + int ret; + + ret = ub960_validate_stream_vcs(priv); + if (ret) + return ret; + + ub960_get_vc_maps(priv, state, vc_map); + + for_each_active_route(&state->routing, route) { + struct ub960_rxport *rxport; + struct ub960_txport *txport; + struct v4l2_mbus_framefmt *fmt; + const struct ub960_format_info *ub960_fmt; + unsigned int nport; + + nport = ub960_pad_to_port(priv, route->sink_pad); + + rxport = priv->rxports[nport]; + if (!rxport) + return -EINVAL; + + txport = priv->txports[ub960_pad_to_port(priv, route->source_pad)]; + if (!txport) + return -EINVAL; + + rx_data[nport].tx_port = ub960_pad_to_port(priv, route->source_pad); + + rx_data[nport].num_streams++; + + /* For the rest, we are only interested in parallel busses */ + if (rxport->rx_mode == RXPORT_MODE_CSI2_SYNC || + rxport->rx_mode == RXPORT_MODE_CSI2_ASYNC) + continue; + + if (rx_data[nport].num_streams > 2) + return -EPIPE; + + fmt = v4l2_subdev_state_get_stream_format(state, + route->sink_pad, + route->sink_stream); + if (!fmt) + return -EPIPE; + + ub960_fmt = ub960_find_format(fmt->code); + if (!ub960_fmt) + return -EPIPE; + + if (ub960_fmt->meta) { + if (fmt->height > 3) { + dev_err(&priv->client->dev, + "rx%u: unsupported metadata height %u\n", + nport, fmt->height); + return -EPIPE; + } + + rx_data[nport].meta_dt = ub960_fmt->datatype; + rx_data[nport].meta_lines = fmt->height; + } else { + rx_data[nport].pixel_dt = ub960_fmt->datatype; + } + } + + /* Configure RX ports */ + + fwd_ctl = 0; + + for (nport = 0; nport < priv->hw_data->num_rxports; nport++) { + struct ub960_rxport *rxport = priv->rxports[nport]; + u8 vc = vc_map[nport]; + + if (rx_data[nport].num_streams == 0) + continue; + + switch (rxport->rx_mode) { + case RXPORT_MODE_RAW10: + ub960_rxport_write(priv, nport, UB960_RR_RAW10_ID, + rx_data[nport].pixel_dt | (vc << UB960_RR_RAW10_ID_VC_SHIFT)); + + ub960_rxport_write(priv, rxport->nport, + UB960_RR_RAW_EMBED_DTYPE, + (rx_data[nport].meta_lines << UB960_RR_RAW_EMBED_DTYPE_LINES_SHIFT) | + rx_data[nport].meta_dt); + + break; + + case RXPORT_MODE_RAW12_HF: + case RXPORT_MODE_RAW12_LF: + /* Not implemented */ + break; + + case RXPORT_MODE_CSI2_SYNC: + case RXPORT_MODE_CSI2_ASYNC: + if (!priv->hw_data->is_ub9702) { + /* Map all VCs from this port to the same VC */ + ub960_rxport_write(priv, nport, UB960_RR_CSI_VC_MAP, + (vc << UB960_RR_CSI_VC_MAP_SHIFT(3)) | + (vc << UB960_RR_CSI_VC_MAP_SHIFT(2)) | + (vc << UB960_RR_CSI_VC_MAP_SHIFT(1)) | + (vc << UB960_RR_CSI_VC_MAP_SHIFT(0))); + } else { + unsigned int i; + + /* Map all VCs from this port to VC(nport) */ + for (i = 0; i < 8; i++) + ub960_rxport_write(priv, nport, + UB960_RR_VC_ID_MAP(i), + nport); + } + + break; + } + + /* Forwarding */ + + fwd_ctl |= BIT(4 + nport); /* forward disable */ + + if (rx_data[nport].tx_port == 1) + fwd_ctl |= BIT(nport); /* forward to TX1 */ + else + fwd_ctl &= ~BIT(nport); /* forward to TX0 */ + } + + ub960_write(priv, UB960_SR_FWD_CTL1, fwd_ctl); + + return 0; +} + +static void ub960_update_streaming_status(struct ub960_data *priv) +{ + unsigned int i; + + for (i = 0; i < UB960_MAX_NPORTS; i++) { + if (priv->stream_enable_mask[i]) + break; + } + + priv->streaming = i < UB960_MAX_NPORTS; +} + +static int ub960_enable_streams(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, u32 source_pad, + u64 source_streams_mask) +{ + struct ub960_data *priv = sd_to_ub960(sd); + struct device *dev = &priv->client->dev; + u64 sink_streams[UB960_MAX_RX_NPORTS] = {}; + struct v4l2_subdev_route *route; + unsigned int failed_port; + unsigned int nport; + int ret; + + if (!priv->streaming) { + dev_dbg(dev, "Prepare for streaming\n"); + ret = ub960_configure_ports_for_streaming(priv, state); + if (ret) + return ret; + } + + /* Enable TX port if not yet enabled */ + if (!priv->stream_enable_mask[source_pad]) { + ret = ub960_enable_tx_port(priv, + ub960_pad_to_port(priv, source_pad)); + if (ret) + return ret; + } + + priv->stream_enable_mask[source_pad] |= source_streams_mask; + + /* Collect sink streams per pad which we need to enable */ + for_each_active_route(&state->routing, route) { + if (route->source_pad != source_pad) + continue; + + if (!(source_streams_mask & BIT_ULL(route->source_stream))) + continue; + + nport = ub960_pad_to_port(priv, route->sink_pad); + + sink_streams[nport] |= BIT_ULL(route->sink_stream); + } + + for (nport = 0; nport < priv->hw_data->num_rxports; nport++) { + if (!sink_streams[nport]) + continue; + + /* Enable the RX port if not yet enabled */ + if (!priv->stream_enable_mask[nport]) { + ret = ub960_enable_rx_port(priv, nport); + if (ret) { + failed_port = nport; + goto err; + } + } + + priv->stream_enable_mask[nport] |= sink_streams[nport]; + + dev_dbg(dev, "enable RX port %u streams %#llx\n", nport, + sink_streams[nport]); + + ret = v4l2_subdev_enable_streams( + priv->rxports[nport]->source.sd, + priv->rxports[nport]->source.pad, + sink_streams[nport]); + if (ret) { + priv->stream_enable_mask[nport] &= ~sink_streams[nport]; + + if (!priv->stream_enable_mask[nport]) + ub960_disable_rx_port(priv, nport); + + failed_port = nport; + goto err; + } + } + + priv->streaming = true; + + return 0; + +err: + for (nport = 0; nport < failed_port; nport++) { + if (!sink_streams[nport]) + continue; + + dev_dbg(dev, "disable RX port %u streams %#llx\n", nport, + sink_streams[nport]); + + ret = v4l2_subdev_disable_streams( + priv->rxports[nport]->source.sd, + priv->rxports[nport]->source.pad, + sink_streams[nport]); + if (ret) + dev_err(dev, "Failed to disable streams: %d\n", ret); + + priv->stream_enable_mask[nport] &= ~sink_streams[nport]; + + /* Disable RX port if no active streams */ + if (!priv->stream_enable_mask[nport]) + ub960_disable_rx_port(priv, nport); + } + + priv->stream_enable_mask[source_pad] &= ~source_streams_mask; + + if (!priv->stream_enable_mask[source_pad]) + ub960_disable_tx_port(priv, + ub960_pad_to_port(priv, source_pad)); + + ub960_update_streaming_status(priv); + + return ret; +} + +static int ub960_disable_streams(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + u32 source_pad, u64 source_streams_mask) +{ + struct ub960_data *priv = sd_to_ub960(sd); + struct device *dev = &priv->client->dev; + u64 sink_streams[UB960_MAX_RX_NPORTS] = {}; + struct v4l2_subdev_route *route; + unsigned int nport; + int ret; + + /* Collect sink streams per pad which we need to disable */ + for_each_active_route(&state->routing, route) { + if (route->source_pad != source_pad) + continue; + + if (!(source_streams_mask & BIT_ULL(route->source_stream))) + continue; + + nport = ub960_pad_to_port(priv, route->sink_pad); + + sink_streams[nport] |= BIT_ULL(route->sink_stream); + } + + for (nport = 0; nport < priv->hw_data->num_rxports; nport++) { + if (!sink_streams[nport]) + continue; + + dev_dbg(dev, "disable RX port %u streams %#llx\n", nport, + sink_streams[nport]); + + ret = v4l2_subdev_disable_streams( + priv->rxports[nport]->source.sd, + priv->rxports[nport]->source.pad, + sink_streams[nport]); + if (ret) + dev_err(dev, "Failed to disable streams: %d\n", ret); + + priv->stream_enable_mask[nport] &= ~sink_streams[nport]; + + /* Disable RX port if no active streams */ + if (!priv->stream_enable_mask[nport]) + ub960_disable_rx_port(priv, nport); + } + + /* Disable TX port if no active streams */ + + priv->stream_enable_mask[source_pad] &= ~source_streams_mask; + + if (!priv->stream_enable_mask[source_pad]) + ub960_disable_tx_port(priv, + ub960_pad_to_port(priv, source_pad)); + + ub960_update_streaming_status(priv); + + return 0; +} + +static int _ub960_set_routing(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + struct v4l2_subdev_krouting *routing) +{ + static const struct v4l2_mbus_framefmt format = { + .width = 640, + .height = 480, + .code = MEDIA_BUS_FMT_UYVY8_1X16, + .field = V4L2_FIELD_NONE, + .colorspace = V4L2_COLORSPACE_SRGB, + .ycbcr_enc = V4L2_YCBCR_ENC_601, + .quantization = V4L2_QUANTIZATION_LIM_RANGE, + .xfer_func = V4L2_XFER_FUNC_SRGB, + }; + int ret; + + /* + * Note: we can only support up to V4L2_FRAME_DESC_ENTRY_MAX, until + * frame desc is made dynamically allocated. + */ + + if (routing->num_routes > V4L2_FRAME_DESC_ENTRY_MAX) + return -E2BIG; + + ret = v4l2_subdev_routing_validate(sd, routing, + V4L2_SUBDEV_ROUTING_ONLY_1_TO_1 | + V4L2_SUBDEV_ROUTING_NO_SINK_STREAM_MIX); + if (ret) + return ret; + + ret = v4l2_subdev_set_routing_with_fmt(sd, state, routing, &format); + if (ret) + return ret; + + return 0; +} + +static int ub960_set_routing(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + enum v4l2_subdev_format_whence which, + struct v4l2_subdev_krouting *routing) +{ + struct ub960_data *priv = sd_to_ub960(sd); + + if (which == V4L2_SUBDEV_FORMAT_ACTIVE && priv->streaming) + return -EBUSY; + + return _ub960_set_routing(sd, state, routing); +} + +static int ub960_get_frame_desc(struct v4l2_subdev *sd, unsigned int pad, + struct v4l2_mbus_frame_desc *fd) +{ + struct ub960_data *priv = sd_to_ub960(sd); + struct v4l2_subdev_route *route; + struct v4l2_subdev_state *state; + int ret = 0; + struct device *dev = &priv->client->dev; + u8 vc_map[UB960_MAX_RX_NPORTS] = {}; + + if (!ub960_pad_is_source(priv, pad)) + return -EINVAL; + + memset(fd, 0, sizeof(*fd)); + + fd->type = V4L2_MBUS_FRAME_DESC_TYPE_CSI2; + + state = v4l2_subdev_lock_and_get_active_state(&priv->sd); + + ub960_get_vc_maps(priv, state, vc_map); + + for_each_active_route(&state->routing, route) { + struct v4l2_mbus_frame_desc_entry *source_entry = NULL; + struct v4l2_mbus_frame_desc source_fd; + unsigned int nport; + unsigned int i; + + if (route->source_pad != pad) + continue; + + nport = ub960_pad_to_port(priv, route->sink_pad); + + ret = v4l2_subdev_call(priv->rxports[nport]->source.sd, pad, + get_frame_desc, + priv->rxports[nport]->source.pad, + &source_fd); + if (ret) { + dev_err(dev, + "Failed to get source frame desc for pad %u\n", + route->sink_pad); + goto out_unlock; + } + + for (i = 0; i < source_fd.num_entries; i++) { + if (source_fd.entry[i].stream == route->sink_stream) { + source_entry = &source_fd.entry[i]; + break; + } + } + + if (!source_entry) { + dev_err(dev, + "Failed to find stream from source frame desc\n"); + ret = -EPIPE; + goto out_unlock; + } + + fd->entry[fd->num_entries].stream = route->source_stream; + fd->entry[fd->num_entries].flags = source_entry->flags; + fd->entry[fd->num_entries].length = source_entry->length; + fd->entry[fd->num_entries].pixelcode = source_entry->pixelcode; + + fd->entry[fd->num_entries].bus.csi2.vc = vc_map[nport]; + + if (source_fd.type == V4L2_MBUS_FRAME_DESC_TYPE_CSI2) { + fd->entry[fd->num_entries].bus.csi2.dt = + source_entry->bus.csi2.dt; + } else { + const struct ub960_format_info *ub960_fmt; + struct v4l2_mbus_framefmt *fmt; + + fmt = v4l2_subdev_state_get_stream_format(state, pad, + route->source_stream); + + if (!fmt) { + ret = -EINVAL; + goto out_unlock; + } + + ub960_fmt = ub960_find_format(fmt->code); + if (!ub960_fmt) { + dev_err(dev, "Unable to find format\n"); + ret = -EINVAL; + goto out_unlock; + } + + fd->entry[fd->num_entries].bus.csi2.dt = + ub960_fmt->datatype; + } + + fd->num_entries++; + } + +out_unlock: + v4l2_subdev_unlock_state(state); + + return ret; +} + +static int ub960_set_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + struct v4l2_subdev_format *format) +{ + struct ub960_data *priv = sd_to_ub960(sd); + struct v4l2_mbus_framefmt *fmt; + + if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE && priv->streaming) + return -EBUSY; + + /* No transcoding, source and sink formats must match. */ + if (ub960_pad_is_source(priv, format->pad)) + return v4l2_subdev_get_fmt(sd, state, format); + + /* + * Default to the first format if the requested media bus code isn't + * supported. + */ + if (!ub960_find_format(format->format.code)) + format->format.code = ub960_formats[0].code; + + fmt = v4l2_subdev_state_get_stream_format(state, format->pad, + format->stream); + if (!fmt) + return -EINVAL; + + *fmt = format->format; + + fmt = v4l2_subdev_state_get_opposite_stream_format(state, format->pad, + format->stream); + if (!fmt) + return -EINVAL; + + *fmt = format->format; + + return 0; +} + +static int ub960_init_cfg(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state) +{ + struct ub960_data *priv = sd_to_ub960(sd); + + struct v4l2_subdev_route routes[] = { + { + .sink_pad = 0, + .sink_stream = 0, + .source_pad = priv->hw_data->num_rxports, + .source_stream = 0, + .flags = V4L2_SUBDEV_ROUTE_FL_ACTIVE, + }, + }; + + struct v4l2_subdev_krouting routing = { + .num_routes = ARRAY_SIZE(routes), + .routes = routes, + }; + + return _ub960_set_routing(sd, state, &routing); +} + +static const struct v4l2_subdev_pad_ops ub960_pad_ops = { + .enable_streams = ub960_enable_streams, + .disable_streams = ub960_disable_streams, + + .set_routing = ub960_set_routing, + .get_frame_desc = ub960_get_frame_desc, + + .get_fmt = v4l2_subdev_get_fmt, + .set_fmt = ub960_set_fmt, + + .init_cfg = ub960_init_cfg, +}; + +static int ub960_log_status(struct v4l2_subdev *sd) +{ + struct ub960_data *priv = sd_to_ub960(sd); + struct device *dev = &priv->client->dev; + struct v4l2_subdev_state *state; + unsigned int nport; + unsigned int i; + u16 v16 = 0; + u8 v = 0; + u8 id[UB960_SR_FPD3_RX_ID_LEN]; + + state = v4l2_subdev_lock_and_get_active_state(sd); + + for (i = 0; i < sizeof(id); i++) + ub960_read(priv, UB960_SR_FPD3_RX_ID(i), &id[i]); + + dev_info(dev, "ID '%.*s'\n", (int)sizeof(id), id); + + for (nport = 0; nport < priv->hw_data->num_txports; nport++) { + struct ub960_txport *txport = priv->txports[nport]; + + dev_info(dev, "TX %u\n", nport); + + if (!txport) { + dev_info(dev, "\tNot initialized\n"); + continue; + } + + ub960_txport_read(priv, nport, UB960_TR_CSI_STS, &v); + dev_info(dev, "\tsync %u, pass %u\n", v & (u8)BIT(1), + v & (u8)BIT(0)); + + ub960_read16(priv, UB960_SR_CSI_FRAME_COUNT_HI(nport), &v16); + dev_info(dev, "\tframe counter %u\n", v16); + + ub960_read16(priv, UB960_SR_CSI_FRAME_ERR_COUNT_HI(nport), &v16); + dev_info(dev, "\tframe error counter %u\n", v16); + + ub960_read16(priv, UB960_SR_CSI_LINE_COUNT_HI(nport), &v16); + dev_info(dev, "\tline counter %u\n", v16); + + ub960_read16(priv, UB960_SR_CSI_LINE_ERR_COUNT_HI(nport), &v16); + dev_info(dev, "\tline error counter %u\n", v16); + } + + for (nport = 0; nport < priv->hw_data->num_rxports; nport++) { + struct ub960_rxport *rxport = priv->rxports[nport]; + u8 eq_level; + s8 strobe_pos; + unsigned int i; + + dev_info(dev, "RX %u\n", nport); + + if (!rxport) { + dev_info(dev, "\tNot initialized\n"); + continue; + } + + ub960_rxport_read(priv, nport, UB960_RR_RX_PORT_STS1, &v); + + if (v & UB960_RR_RX_PORT_STS1_LOCK_STS) + dev_info(dev, "\tLocked\n"); + else + dev_info(dev, "\tNot locked\n"); + + dev_info(dev, "\trx_port_sts1 %#02x\n", v); + ub960_rxport_read(priv, nport, UB960_RR_RX_PORT_STS2, &v); + dev_info(dev, "\trx_port_sts2 %#02x\n", v); + + ub960_rxport_read16(priv, nport, UB960_RR_RX_FREQ_HIGH, &v16); + dev_info(dev, "\tlink freq %llu Hz\n", (v16 * 1000000ULL) >> 8); + + ub960_rxport_read16(priv, nport, UB960_RR_RX_PAR_ERR_HI, &v16); + dev_info(dev, "\tparity errors %u\n", v16); + + ub960_rxport_read16(priv, nport, UB960_RR_LINE_COUNT_HI, &v16); + dev_info(dev, "\tlines per frame %u\n", v16); + + ub960_rxport_read16(priv, nport, UB960_RR_LINE_LEN_1, &v16); + dev_info(dev, "\tbytes per line %u\n", v16); + + ub960_rxport_read(priv, nport, UB960_RR_CSI_ERR_COUNTER, &v); + dev_info(dev, "\tcsi_err_counter %u\n", v); + + /* Strobe */ + + ub960_read(priv, UB960_XR_AEQ_CTL1, &v); + + dev_info(dev, "\t%s strobe\n", + (v & UB960_XR_AEQ_CTL1_AEQ_SFILTER_EN) ? "Adaptive" : + "Manual"); + + if (v & UB960_XR_AEQ_CTL1_AEQ_SFILTER_EN) { + ub960_read(priv, UB960_XR_SFILTER_CFG, &v); + + dev_info(dev, "\tStrobe range [%d, %d]\n", + ((v >> UB960_XR_SFILTER_CFG_SFILTER_MIN_SHIFT) & 0xf) - 7, + ((v >> UB960_XR_SFILTER_CFG_SFILTER_MAX_SHIFT) & 0xf) - 7); + } + + ub960_rxport_get_strobe_pos(priv, nport, &strobe_pos); + + dev_info(dev, "\tStrobe pos %d\n", strobe_pos); + + /* EQ */ + + ub960_rxport_read(priv, nport, UB960_RR_AEQ_BYPASS, &v); + + dev_info(dev, "\t%s EQ\n", + (v & UB960_RR_AEQ_BYPASS_ENABLE) ? "Manual" : + "Adaptive"); + + if (!(v & UB960_RR_AEQ_BYPASS_ENABLE)) { + ub960_rxport_read(priv, nport, UB960_RR_AEQ_MIN_MAX, &v); + + dev_info(dev, "\tEQ range [%u, %u]\n", + (v >> UB960_RR_AEQ_MIN_MAX_AEQ_FLOOR_SHIFT) & 0xf, + (v >> UB960_RR_AEQ_MIN_MAX_AEQ_MAX_SHIFT) & 0xf); + } + + if (ub960_rxport_get_eq_level(priv, nport, &eq_level) == 0) + dev_info(dev, "\tEQ level %u\n", eq_level); + + /* GPIOs */ + for (i = 0; i < UB960_NUM_BC_GPIOS; i++) { + u8 ctl_reg; + u8 ctl_shift; + + ctl_reg = UB960_RR_BC_GPIO_CTL(i / 2); + ctl_shift = (i % 2) * 4; + + ub960_rxport_read(priv, nport, ctl_reg, &v); + + dev_info(dev, "\tGPIO%u: mode %u\n", i, + (v >> ctl_shift) & 0xf); + } + } + + v4l2_subdev_unlock_state(state); + + return 0; +} + +static const struct v4l2_subdev_core_ops ub960_subdev_core_ops = { + .log_status = ub960_log_status, + .subscribe_event = v4l2_ctrl_subdev_subscribe_event, + .unsubscribe_event = v4l2_event_subdev_unsubscribe, +}; + +static const struct v4l2_subdev_ops ub960_subdev_ops = { + .core = &ub960_subdev_core_ops, + .pad = &ub960_pad_ops, +}; + +static const struct media_entity_operations ub960_entity_ops = { + .get_fwnode_pad = v4l2_subdev_get_fwnode_pad_1_to_1, + .link_validate = v4l2_subdev_link_validate, + .has_pad_interdep = v4l2_subdev_has_pad_interdep, +}; + +/* ----------------------------------------------------------------------------- + * Core + */ + +static irqreturn_t ub960_handle_events(int irq, void *arg) +{ + struct ub960_data *priv = arg; + unsigned int i; + u8 int_sts; + u8 fwd_sts; + int ret; + + ret = ub960_read(priv, UB960_SR_INTERRUPT_STS, &int_sts); + if (ret || !int_sts) + return IRQ_NONE; + + dev_dbg(&priv->client->dev, "INTERRUPT_STS %x\n", int_sts); + + ret = ub960_read(priv, UB960_SR_FWD_STS, &fwd_sts); + if (ret) + return IRQ_NONE; + + dev_dbg(&priv->client->dev, "FWD_STS %#02x\n", fwd_sts); + + for (i = 0; i < priv->hw_data->num_txports; i++) { + if (int_sts & UB960_SR_INTERRUPT_STS_IS_CSI_TX(i)) + ub960_csi_handle_events(priv, i); + } + + for (i = 0; i < priv->hw_data->num_rxports; i++) { + if (!priv->rxports[i]) + continue; + + if (int_sts & UB960_SR_INTERRUPT_STS_IS_RX(i)) + ub960_rxport_handle_events(priv, i); + } + + return IRQ_HANDLED; +} + +static void ub960_handler_work(struct work_struct *work) +{ + struct delayed_work *dwork = to_delayed_work(work); + struct ub960_data *priv = + container_of(dwork, struct ub960_data, poll_work); + + ub960_handle_events(0, priv); + + schedule_delayed_work(&priv->poll_work, + msecs_to_jiffies(UB960_POLL_TIME_MS)); +} + +static void ub960_txport_free_ports(struct ub960_data *priv) +{ + unsigned int nport; + + for (nport = 0; nport < priv->hw_data->num_txports; nport++) { + struct ub960_txport *txport = priv->txports[nport]; + + if (!txport) + continue; + + kfree(txport); + priv->txports[nport] = NULL; + } +} + +static void ub960_rxport_free_ports(struct ub960_data *priv) +{ + unsigned int nport; + + for (nport = 0; nport < priv->hw_data->num_rxports; nport++) { + struct ub960_rxport *rxport = priv->rxports[nport]; + + if (!rxport) + continue; + + fwnode_handle_put(rxport->source.ep_fwnode); + fwnode_handle_put(rxport->ser.fwnode); + + kfree(rxport); + priv->rxports[nport] = NULL; + } +} + +static int +ub960_parse_dt_rxport_link_properties(struct ub960_data *priv, + struct fwnode_handle *link_fwnode, + struct ub960_rxport *rxport) +{ + struct device *dev = &priv->client->dev; + unsigned int nport = rxport->nport; + u32 rx_mode; + u32 cdr_mode; + s32 strobe_pos; + u32 eq_level; + u32 ser_i2c_alias; + int ret; + + cdr_mode = RXPORT_CDR_FPD3; + + ret = fwnode_property_read_u32(link_fwnode, "ti,cdr-mode", &cdr_mode); + if (ret < 0 && ret != -EINVAL) { + dev_err(dev, "rx%u: failed to read '%s': %d\n", nport, + "ti,cdr-mode", ret); + return ret; + } + + if (cdr_mode > RXPORT_CDR_LAST) { + dev_err(dev, "rx%u: bad 'ti,cdr-mode' %u\n", nport, cdr_mode); + return -EINVAL; + } + + if (!priv->hw_data->is_fpdlink4 && cdr_mode == RXPORT_CDR_FPD4) { + dev_err(dev, "rx%u: FPD-Link 4 CDR not supported\n", nport); + return -EINVAL; + } + + rxport->cdr_mode = cdr_mode; + + ret = fwnode_property_read_u32(link_fwnode, "ti,rx-mode", &rx_mode); + if (ret < 0) { + dev_err(dev, "rx%u: failed to read '%s': %d\n", nport, + "ti,rx-mode", ret); + return ret; + } + + if (rx_mode > RXPORT_MODE_LAST) { + dev_err(dev, "rx%u: bad 'ti,rx-mode' %u\n", nport, rx_mode); + return -EINVAL; + } + + switch (rx_mode) { + case RXPORT_MODE_RAW12_HF: + case RXPORT_MODE_RAW12_LF: + case RXPORT_MODE_CSI2_ASYNC: + dev_err(dev, "rx%u: unsupported 'ti,rx-mode' %u\n", nport, + rx_mode); + return -EINVAL; + default: + break; + } + + rxport->rx_mode = rx_mode; + + /* EQ & Strobe related */ + + /* Defaults */ + rxport->eq.manual_eq = false; + rxport->eq.aeq.eq_level_min = UB960_MIN_EQ_LEVEL; + rxport->eq.aeq.eq_level_max = UB960_MAX_EQ_LEVEL; + + ret = fwnode_property_read_u32(link_fwnode, "ti,strobe-pos", + &strobe_pos); + if (ret) { + if (ret != -EINVAL) { + dev_err(dev, "rx%u: failed to read '%s': %d\n", nport, + "ti,strobe-pos", ret); + return ret; + } + } else { + if (strobe_pos < UB960_MIN_MANUAL_STROBE_POS || + strobe_pos > UB960_MAX_MANUAL_STROBE_POS) { + dev_err(dev, "rx%u: illegal 'strobe-pos' value: %d\n", + nport, strobe_pos); + return -EINVAL; + } + + /* NOTE: ignored unless global manual strobe pos is also set */ + rxport->eq.strobe_pos = strobe_pos; + if (!priv->strobe.manual) + dev_warn(dev, + "rx%u: 'ti,strobe-pos' ignored as 'ti,manual-strobe' not set\n", + nport); + } + + ret = fwnode_property_read_u32(link_fwnode, "ti,eq-level", &eq_level); + if (ret) { + if (ret != -EINVAL) { + dev_err(dev, "rx%u: failed to read '%s': %d\n", nport, + "ti,eq-level", ret); + return ret; + } + } else { + if (eq_level > UB960_MAX_EQ_LEVEL) { + dev_err(dev, "rx%u: illegal 'ti,eq-level' value: %d\n", + nport, eq_level); + return -EINVAL; + } + + rxport->eq.manual_eq = true; + rxport->eq.manual.eq_level = eq_level; + } + + ret = fwnode_property_read_u32(link_fwnode, "i2c-alias", + &ser_i2c_alias); + if (ret) { + dev_err(dev, "rx%u: failed to read '%s': %d\n", nport, + "i2c-alias", ret); + return ret; + } + rxport->ser.alias = ser_i2c_alias; + + rxport->ser.fwnode = fwnode_get_named_child_node(link_fwnode, "serializer"); + if (!rxport->ser.fwnode) { + dev_err(dev, "rx%u: missing 'serializer' node\n", nport); + return -EINVAL; + } + + return 0; +} + +static int ub960_parse_dt_rxport_ep_properties(struct ub960_data *priv, + struct fwnode_handle *ep_fwnode, + struct ub960_rxport *rxport) +{ + struct device *dev = &priv->client->dev; + struct v4l2_fwnode_endpoint vep = {}; + unsigned int nport = rxport->nport; + bool hsync_hi; + bool vsync_hi; + int ret; + + rxport->source.ep_fwnode = fwnode_graph_get_remote_endpoint(ep_fwnode); + if (!rxport->source.ep_fwnode) { + dev_err(dev, "rx%u: no remote endpoint\n", nport); + return -ENODEV; + } + + /* We currently have properties only for RAW modes */ + + switch (rxport->rx_mode) { + case RXPORT_MODE_RAW10: + case RXPORT_MODE_RAW12_HF: + case RXPORT_MODE_RAW12_LF: + break; + default: + return 0; + } + + vep.bus_type = V4L2_MBUS_PARALLEL; + ret = v4l2_fwnode_endpoint_parse(ep_fwnode, &vep); + if (ret) { + dev_err(dev, "rx%u: failed to parse endpoint data\n", nport); + goto err_put_source_ep_fwnode; + } + + hsync_hi = !!(vep.bus.parallel.flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH); + vsync_hi = !!(vep.bus.parallel.flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH); + + /* LineValid and FrameValid are inverse to the h/vsync active */ + rxport->lv_fv_pol = (hsync_hi ? UB960_RR_PORT_CONFIG2_LV_POL_LOW : 0) | + (vsync_hi ? UB960_RR_PORT_CONFIG2_FV_POL_LOW : 0); + + return 0; + +err_put_source_ep_fwnode: + fwnode_handle_put(rxport->source.ep_fwnode); + return ret; +} + +static int ub960_parse_dt_rxport(struct ub960_data *priv, unsigned int nport, + struct fwnode_handle *link_fwnode, + struct fwnode_handle *ep_fwnode) +{ + static const char *vpoc_names[UB960_MAX_RX_NPORTS] = { + "vpoc0", "vpoc1", "vpoc2", "vpoc3" + }; + struct device *dev = &priv->client->dev; + struct ub960_rxport *rxport; + int ret; + + rxport = kzalloc(sizeof(*rxport), GFP_KERNEL); + if (!rxport) + return -ENOMEM; + + priv->rxports[nport] = rxport; + + rxport->nport = nport; + rxport->priv = priv; + + ret = ub960_parse_dt_rxport_link_properties(priv, link_fwnode, rxport); + if (ret) + goto err_free_rxport; + + rxport->vpoc = devm_regulator_get_optional(dev, vpoc_names[nport]); + if (IS_ERR(rxport->vpoc)) { + ret = PTR_ERR(rxport->vpoc); + if (ret == -ENODEV) { + rxport->vpoc = NULL; + } else { + dev_err(dev, "rx%u: failed to get VPOC supply: %d\n", + nport, ret); + goto err_put_remote_fwnode; + } + } + + ret = ub960_parse_dt_rxport_ep_properties(priv, ep_fwnode, rxport); + if (ret) + goto err_put_remote_fwnode; + + return 0; + +err_put_remote_fwnode: + fwnode_handle_put(rxport->ser.fwnode); +err_free_rxport: + priv->rxports[nport] = NULL; + kfree(rxport); + return ret; +} + +static struct fwnode_handle * +ub960_fwnode_get_link_by_regs(struct fwnode_handle *links_fwnode, + unsigned int nport) +{ + struct fwnode_handle *link_fwnode; + int ret; + + fwnode_for_each_child_node(links_fwnode, link_fwnode) { + u32 link_num; + + if (!str_has_prefix(fwnode_get_name(link_fwnode), "link@")) + continue; + + ret = fwnode_property_read_u32(link_fwnode, "reg", &link_num); + if (ret) { + fwnode_handle_put(link_fwnode); + return NULL; + } + + if (nport == link_num) + return link_fwnode; + } + + return NULL; +} + +static int ub960_parse_dt_rxports(struct ub960_data *priv) +{ + struct device *dev = &priv->client->dev; + struct fwnode_handle *links_fwnode; + unsigned int nport; + int ret; + + links_fwnode = fwnode_get_named_child_node(dev_fwnode(dev), "links"); + if (!links_fwnode) { + dev_err(dev, "'links' node missing\n"); + return -ENODEV; + } + + /* Defaults, recommended by TI */ + priv->strobe.min = 2; + priv->strobe.max = 3; + + priv->strobe.manual = fwnode_property_read_bool(links_fwnode, "ti,manual-strobe"); + + for (nport = 0; nport < priv->hw_data->num_rxports; nport++) { + struct fwnode_handle *link_fwnode; + struct fwnode_handle *ep_fwnode; + + link_fwnode = ub960_fwnode_get_link_by_regs(links_fwnode, nport); + if (!link_fwnode) + continue; + + ep_fwnode = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev), + nport, 0, 0); + if (!ep_fwnode) { + fwnode_handle_put(link_fwnode); + continue; + } + + ret = ub960_parse_dt_rxport(priv, nport, link_fwnode, + ep_fwnode); + + fwnode_handle_put(link_fwnode); + fwnode_handle_put(ep_fwnode); + + if (ret) { + dev_err(dev, "rx%u: failed to parse RX port\n", nport); + goto err_put_links; + } + } + + fwnode_handle_put(links_fwnode); + + return 0; + +err_put_links: + fwnode_handle_put(links_fwnode); + + return ret; +} + +static int ub960_parse_dt_txports(struct ub960_data *priv) +{ + struct device *dev = &priv->client->dev; + u32 nport; + int ret; + + for (nport = 0; nport < priv->hw_data->num_txports; nport++) { + unsigned int port = nport + priv->hw_data->num_rxports; + struct fwnode_handle *ep_fwnode; + + ep_fwnode = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev), + port, 0, 0); + if (!ep_fwnode) + continue; + + ret = ub960_parse_dt_txport(priv, ep_fwnode, nport); + + fwnode_handle_put(ep_fwnode); + + if (ret) + break; + } + + return 0; +} + +static int ub960_parse_dt(struct ub960_data *priv) +{ + int ret; + + ret = ub960_parse_dt_rxports(priv); + if (ret) + return ret; + + ret = ub960_parse_dt_txports(priv); + if (ret) + goto err_free_rxports; + + return 0; + +err_free_rxports: + ub960_rxport_free_ports(priv); + + return ret; +} + +static int ub960_notify_bound(struct v4l2_async_notifier *notifier, + struct v4l2_subdev *subdev, + struct v4l2_async_subdev *asd) +{ + struct ub960_data *priv = sd_to_ub960(notifier->sd); + struct ub960_rxport *rxport = to_ub960_asd(asd)->rxport; + struct device *dev = &priv->client->dev; + u8 nport = rxport->nport; + unsigned int i; + int ret; + + ret = media_entity_get_fwnode_pad(&subdev->entity, + rxport->source.ep_fwnode, + MEDIA_PAD_FL_SOURCE); + if (ret < 0) { + dev_err(dev, "Failed to find pad for %s\n", subdev->name); + return ret; + } + + rxport->source.sd = subdev; + rxport->source.pad = ret; + + ret = media_create_pad_link(&rxport->source.sd->entity, + rxport->source.pad, &priv->sd.entity, nport, + MEDIA_LNK_FL_ENABLED | + MEDIA_LNK_FL_IMMUTABLE); + if (ret) { + dev_err(dev, "Unable to link %s:%u -> %s:%u\n", + rxport->source.sd->name, rxport->source.pad, + priv->sd.name, nport); + return ret; + } + + for (i = 0; i < priv->hw_data->num_rxports; i++) { + if (priv->rxports[i] && !priv->rxports[i]->source.sd) { + dev_dbg(dev, "Waiting for more subdevs to be bound\n"); + return 0; + } + } + + return 0; +} + +static void ub960_notify_unbind(struct v4l2_async_notifier *notifier, + struct v4l2_subdev *subdev, + struct v4l2_async_subdev *asd) +{ + struct ub960_rxport *rxport = to_ub960_asd(asd)->rxport; + + rxport->source.sd = NULL; +} + +static const struct v4l2_async_notifier_operations ub960_notify_ops = { + .bound = ub960_notify_bound, + .unbind = ub960_notify_unbind, +}; + +static int ub960_v4l2_notifier_register(struct ub960_data *priv) +{ + struct device *dev = &priv->client->dev; + unsigned int i; + int ret; + + v4l2_async_nf_init(&priv->notifier); + + for (i = 0; i < priv->hw_data->num_rxports; i++) { + struct ub960_rxport *rxport = priv->rxports[i]; + struct ub960_asd *asd; + + if (!rxport) + continue; + + asd = v4l2_async_nf_add_fwnode(&priv->notifier, + rxport->source.ep_fwnode, + struct ub960_asd); + if (IS_ERR(asd)) { + dev_err(dev, "Failed to add subdev for source %u: %pe", + i, asd); + v4l2_async_nf_cleanup(&priv->notifier); + return PTR_ERR(asd); + } + + asd->rxport = rxport; + } + + priv->notifier.ops = &ub960_notify_ops; + + ret = v4l2_async_subdev_nf_register(&priv->sd, &priv->notifier); + if (ret) { + dev_err(dev, "Failed to register subdev_notifier"); + v4l2_async_nf_cleanup(&priv->notifier); + return ret; + } + + return 0; +} + +static void ub960_v4l2_notifier_unregister(struct ub960_data *priv) +{ + v4l2_async_nf_unregister(&priv->notifier); + v4l2_async_nf_cleanup(&priv->notifier); +} + +static int ub960_create_subdev(struct ub960_data *priv) +{ + struct device *dev = &priv->client->dev; + unsigned int i; + int ret; + + v4l2_i2c_subdev_init(&priv->sd, priv->client, &ub960_subdev_ops); + + v4l2_ctrl_handler_init(&priv->ctrl_handler, 1); + priv->sd.ctrl_handler = &priv->ctrl_handler; + + v4l2_ctrl_new_int_menu(&priv->ctrl_handler, NULL, V4L2_CID_LINK_FREQ, + ARRAY_SIZE(priv->tx_link_freq) - 1, 0, + priv->tx_link_freq); + + if (priv->ctrl_handler.error) { + ret = priv->ctrl_handler.error; + goto err_free_ctrl; + } + + priv->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | + V4L2_SUBDEV_FL_HAS_EVENTS | V4L2_SUBDEV_FL_STREAMS; + priv->sd.entity.function = MEDIA_ENT_F_VID_IF_BRIDGE; + priv->sd.entity.ops = &ub960_entity_ops; + + for (i = 0; i < priv->hw_data->num_rxports + priv->hw_data->num_txports; i++) { + priv->pads[i].flags = ub960_pad_is_sink(priv, i) ? + MEDIA_PAD_FL_SINK : + MEDIA_PAD_FL_SOURCE; + } + + ret = media_entity_pads_init(&priv->sd.entity, + priv->hw_data->num_rxports + + priv->hw_data->num_txports, + priv->pads); + if (ret) + goto err_free_ctrl; + + priv->sd.state_lock = priv->sd.ctrl_handler->lock; + + ret = v4l2_subdev_init_finalize(&priv->sd); + if (ret) + goto err_entity_cleanup; + + ret = ub960_v4l2_notifier_register(priv); + if (ret) { + dev_err(dev, "v4l2 subdev notifier register failed: %d\n", ret); + goto err_subdev_cleanup; + } + + ret = v4l2_async_register_subdev(&priv->sd); + if (ret) { + dev_err(dev, "v4l2_async_register_subdev error: %d\n", ret); + goto err_unreg_notif; + } + + return 0; + +err_unreg_notif: + ub960_v4l2_notifier_unregister(priv); +err_subdev_cleanup: + v4l2_subdev_cleanup(&priv->sd); +err_entity_cleanup: + media_entity_cleanup(&priv->sd.entity); +err_free_ctrl: + v4l2_ctrl_handler_free(&priv->ctrl_handler); + + return ret; +} + +static void ub960_destroy_subdev(struct ub960_data *priv) +{ + ub960_v4l2_notifier_unregister(priv); + v4l2_async_unregister_subdev(&priv->sd); + + v4l2_subdev_cleanup(&priv->sd); + + media_entity_cleanup(&priv->sd.entity); + v4l2_ctrl_handler_free(&priv->ctrl_handler); +} + +static const struct regmap_config ub960_regmap_config = { + .name = "ds90ub960", + + .reg_bits = 8, + .val_bits = 8, + + .max_register = 0xff, + + /* + * We do locking in the driver to cover the TX/RX port selection and the + * indirect register access. + */ + .disable_locking = true, +}; + +static void ub960_reset(struct ub960_data *priv, bool reset_regs) +{ + struct device *dev = &priv->client->dev; + unsigned int v; + int ret; + u8 bit; + + bit = reset_regs ? UB960_SR_RESET_DIGITAL_RESET1 : + UB960_SR_RESET_DIGITAL_RESET0; + + ub960_write(priv, UB960_SR_RESET, bit); + + mutex_lock(&priv->reg_lock); + + ret = regmap_read_poll_timeout(priv->regmap, UB960_SR_RESET, v, + (v & bit) == 0, 2000, 100000); + + mutex_unlock(&priv->reg_lock); + + if (ret) + dev_err(dev, "reset failed: %d\n", ret); +} + +static int ub960_get_hw_resources(struct ub960_data *priv) +{ + struct device *dev = &priv->client->dev; + + priv->regmap = devm_regmap_init_i2c(priv->client, &ub960_regmap_config); + if (IS_ERR(priv->regmap)) + return PTR_ERR(priv->regmap); + + priv->vddio = devm_regulator_get(dev, "vddio"); + if (IS_ERR(priv->vddio)) + return dev_err_probe(dev, PTR_ERR(priv->vddio), + "cannot get VDDIO regulator\n"); + + /* get power-down pin from DT */ + priv->pd_gpio = + devm_gpiod_get_optional(dev, "powerdown", GPIOD_OUT_HIGH); + if (IS_ERR(priv->pd_gpio)) + return dev_err_probe(dev, PTR_ERR(priv->pd_gpio), + "Cannot get powerdown GPIO\n"); + + priv->refclk = devm_clk_get(dev, "refclk"); + if (IS_ERR(priv->refclk)) + return dev_err_probe(dev, PTR_ERR(priv->refclk), + "Cannot get REFCLK\n"); + + return 0; +} + +static int ub960_enable_core_hw(struct ub960_data *priv) +{ + struct device *dev = &priv->client->dev; + u8 rev_mask; + int ret; + u8 dev_sts; + u8 refclk_freq; + + ret = regulator_enable(priv->vddio); + if (ret) + return dev_err_probe(dev, ret, + "failed to enable VDDIO regulator\n"); + + ret = clk_prepare_enable(priv->refclk); + if (ret) { + dev_err_probe(dev, ret, "Failed to enable refclk\n"); + goto err_disable_vddio; + } + + if (priv->pd_gpio) { + gpiod_set_value_cansleep(priv->pd_gpio, 1); + /* wait min 2 ms for reset to complete */ + fsleep(2000); + gpiod_set_value_cansleep(priv->pd_gpio, 0); + /* wait min 2 ms for power up to finish */ + fsleep(2000); + } + + ub960_reset(priv, true); + + /* Runtime check register accessibility */ + ret = ub960_read(priv, UB960_SR_REV_MASK, &rev_mask); + if (ret) { + dev_err_probe(dev, ret, "Cannot read first register, abort\n"); + goto err_pd_gpio; + } + + dev_dbg(dev, "Found %s (rev/mask %#04x)\n", priv->hw_data->model, + rev_mask); + + ret = ub960_read(priv, UB960_SR_DEVICE_STS, &dev_sts); + if (ret) + goto err_pd_gpio; + + ret = ub960_read(priv, UB960_XR_REFCLK_FREQ, &refclk_freq); + if (ret) + goto err_pd_gpio; + + dev_dbg(dev, "refclk valid %u freq %u MHz (clk fw freq %lu MHz)\n", + !!(dev_sts & BIT(4)), refclk_freq, + clk_get_rate(priv->refclk) / 1000000); + + /* Disable all RX ports by default */ + ret = ub960_write(priv, UB960_SR_RX_PORT_CTL, 0); + if (ret) + goto err_pd_gpio; + + /* release GPIO lock */ + if (priv->hw_data->is_ub9702) { + ret = ub960_update_bits(priv, UB960_SR_RESET, + UB960_SR_RESET_GPIO_LOCK_RELEASE, + UB960_SR_RESET_GPIO_LOCK_RELEASE); + if (ret) + goto err_pd_gpio; + } + + return 0; + +err_pd_gpio: + gpiod_set_value_cansleep(priv->pd_gpio, 1); + clk_disable_unprepare(priv->refclk); +err_disable_vddio: + regulator_disable(priv->vddio); + + return ret; +} + +static void ub960_disable_core_hw(struct ub960_data *priv) +{ + gpiod_set_value_cansleep(priv->pd_gpio, 1); + clk_disable_unprepare(priv->refclk); + regulator_disable(priv->vddio); +} + +static int ub960_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct ub960_data *priv; + unsigned int port_lock_mask; + unsigned int port_mask; + unsigned int nport; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->client = client; + + priv->hw_data = device_get_match_data(dev); + + mutex_init(&priv->reg_lock); + + INIT_DELAYED_WORK(&priv->poll_work, ub960_handler_work); + + /* + * Initialize these to invalid values so that the first reg writes will + * configure the target. + */ + priv->reg_current.indirect_target = 0xff; + priv->reg_current.rxport = 0xff; + priv->reg_current.txport = 0xff; + + ret = ub960_get_hw_resources(priv); + if (ret) + goto err_mutex_destroy; + + ret = ub960_enable_core_hw(priv); + if (ret) + goto err_mutex_destroy; + + ret = ub960_parse_dt(priv); + if (ret) + goto err_disable_core_hw; + + ret = ub960_init_tx_ports(priv); + if (ret) + goto err_free_ports; + + ret = ub960_rxport_enable_vpocs(priv); + if (ret) + goto err_free_ports; + + ret = ub960_init_rx_ports(priv); + if (ret) + goto err_disable_vpocs; + + ub960_reset(priv, false); + + port_mask = 0; + + for (nport = 0; nport < priv->hw_data->num_rxports; nport++) { + struct ub960_rxport *rxport = priv->rxports[nport]; + + if (!rxport) + continue; + + port_mask |= BIT(nport); + } + + ret = ub960_rxport_wait_locks(priv, port_mask, &port_lock_mask); + if (ret) + goto err_disable_vpocs; + + if (port_mask != port_lock_mask) { + ret = -EIO; + dev_err_probe(dev, ret, "Failed to lock all RX ports\n"); + goto err_disable_vpocs; + } + + /* + * Clear any errors caused by switching the RX port settings while + * probing. + */ + ub960_clear_rx_errors(priv); + + ret = ub960_init_atr(priv); + if (ret) + goto err_disable_vpocs; + + ret = ub960_rxport_add_serializers(priv); + if (ret) + goto err_uninit_atr; + + ret = ub960_create_subdev(priv); + if (ret) + goto err_free_sers; + + if (client->irq) + dev_warn(dev, "irq support not implemented, using polling\n"); + + schedule_delayed_work(&priv->poll_work, + msecs_to_jiffies(UB960_POLL_TIME_MS)); + + return 0; + +err_free_sers: + ub960_rxport_remove_serializers(priv); +err_uninit_atr: + ub960_uninit_atr(priv); +err_disable_vpocs: + ub960_rxport_disable_vpocs(priv); +err_free_ports: + ub960_rxport_free_ports(priv); + ub960_txport_free_ports(priv); +err_disable_core_hw: + ub960_disable_core_hw(priv); +err_mutex_destroy: + mutex_destroy(&priv->reg_lock); + return ret; +} + +static void ub960_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct ub960_data *priv = sd_to_ub960(sd); + + cancel_delayed_work_sync(&priv->poll_work); + + ub960_destroy_subdev(priv); + ub960_rxport_remove_serializers(priv); + ub960_uninit_atr(priv); + ub960_rxport_disable_vpocs(priv); + ub960_rxport_free_ports(priv); + ub960_txport_free_ports(priv); + ub960_disable_core_hw(priv); + mutex_destroy(&priv->reg_lock); +} + +static const struct ub960_hw_data ds90ub960_hw = { + .model = "ub960", + .num_rxports = 4, + .num_txports = 2, +}; + +static const struct ub960_hw_data ds90ub9702_hw = { + .model = "ub9702", + .num_rxports = 4, + .num_txports = 2, + .is_ub9702 = true, + .is_fpdlink4 = true, +}; + +static const struct i2c_device_id ub960_id[] = { + { "ds90ub960-q1", (kernel_ulong_t)&ds90ub960_hw }, + { "ds90ub9702-q1", (kernel_ulong_t)&ds90ub9702_hw }, + {} +}; +MODULE_DEVICE_TABLE(i2c, ub960_id); + +static const struct of_device_id ub960_dt_ids[] = { + { .compatible = "ti,ds90ub960-q1", .data = &ds90ub960_hw }, + { .compatible = "ti,ds90ub9702-q1", .data = &ds90ub9702_hw }, + {} +}; +MODULE_DEVICE_TABLE(of, ub960_dt_ids); + +static struct i2c_driver ds90ub960_driver = { + .probe_new = ub960_probe, + .remove = ub960_remove, + .id_table = ub960_id, + .driver = { + .name = "ds90ub960", + .of_match_table = ub960_dt_ids, + }, +}; +module_i2c_driver(ds90ub960_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Texas Instruments FPD-Link III/IV Deserializers Driver"); +MODULE_AUTHOR("Luca Ceresoli "); +MODULE_AUTHOR("Tomi Valkeinen "); +MODULE_IMPORT_NS(I2C_ATR); diff --git a/include/media/i2c/ds90ub9xx.h b/include/media/i2c/ds90ub9xx.h new file mode 100644 index 000000000000..0245198469ec --- /dev/null +++ b/include/media/i2c/ds90ub9xx.h @@ -0,0 +1,22 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef __MEDIA_I2C_DS90UB9XX_H__ +#define __MEDIA_I2C_DS90UB9XX_H__ + +#include + +struct i2c_atr; + +/** + * struct ds90ub9xx_platform_data - platform data for FPD-Link Serializers. + * @port: Deserializer RX port for this Serializer + * @atr: I2C ATR + * @bc_rate: back-channel clock rate + */ +struct ds90ub9xx_platform_data { + u32 port; + struct i2c_atr *atr; + unsigned long bc_rate; +}; + +#endif /* __MEDIA_I2C_DS90UB9XX_H__ */