From patchwork Wed Apr 26 11:51:14 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Tomi Valkeinen X-Patchwork-Id: 677612 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id C41E3C77B60 for ; Wed, 26 Apr 2023 11:52:38 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S240717AbjDZLwh (ORCPT ); Wed, 26 Apr 2023 07:52:37 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:46734 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S240763AbjDZLwV (ORCPT ); Wed, 26 Apr 2023 07:52:21 -0400 Received: from perceval.ideasonboard.com (perceval.ideasonboard.com [213.167.242.64]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id CA2B36A5E; Wed, 26 Apr 2023 04:51:54 -0700 (PDT) Received: from desky.lan (91-154-35-171.elisa-laajakaista.fi [91.154.35.171]) by perceval.ideasonboard.com (Postfix) with ESMTPSA id 95B4E6FC7; Wed, 26 Apr 2023 13:51:32 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=ideasonboard.com; s=mail; t=1682509894; bh=C3Ib9Bf6ne8SlIw143IqrZDxcgapScjIQ3pk93cQpR8=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=vnQtK3PFPXPr3xCrp1884acjj1DykZNb/zhYf5yv82wz6wcyE/emxVvzujt0T07CA UiV1meKV6YoQUuzgx5zfvt9icQwKG4XJCVfRsjo19lJ5jbOjsmA3ZQvP6y+bQKHGsy s+X1GK5+cm8meMjOH69/o+Gq27xvoi15/XwSQEh0= From: Tomi Valkeinen To: linux-media@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-i2c@vger.kernel.org, Rob Herring , Krzysztof Kozlowski , Wolfram Sang , Luca Ceresoli , Andy Shevchenko , Matti Vaittinen , Laurent Pinchart Cc: Mauro Carvalho Chehab , Peter Rosin , Liam Girdwood , Mark Brown , Sakari Ailus , Michael Tretter , Hans Verkuil , Mike Pagano , =?utf-8?q?Krzysztof_Ha=C5=82asa?= , Marek Vasut , Satish Nagireddy , Tomi Valkeinen , Laurent Pinchart , Andy Shevchenko Subject: [PATCH v13 8/8] media: i2c: add DS90UB953 driver Date: Wed, 26 Apr 2023 14:51:14 +0300 Message-Id: <20230426115114.156696-9-tomi.valkeinen@ideasonboard.com> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20230426115114.156696-1-tomi.valkeinen@ideasonboard.com> References: <20230426115114.156696-1-tomi.valkeinen@ideasonboard.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-i2c@vger.kernel.org Add driver for TI DS90UB953 FPD-Link III Serializer. Signed-off-by: Tomi Valkeinen Reviewed-by: Laurent Pinchart Reviewed-by: Andy Shevchenko --- drivers/media/i2c/Kconfig | 13 + drivers/media/i2c/Makefile | 1 + drivers/media/i2c/ds90ub953.c | 1400 +++++++++++++++++++++++++++++++++ 3 files changed, 1414 insertions(+) create mode 100644 drivers/media/i2c/ds90ub953.c diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig index bbcbf599a3f8..461df425c163 100644 --- a/drivers/media/i2c/Kconfig +++ b/drivers/media/i2c/Kconfig @@ -1630,6 +1630,19 @@ config VIDEO_DS90UB913 Device driver for the Texas Instruments DS90UB913 FPD-Link III Serializer. +config VIDEO_DS90UB953 + tristate "TI FPD-Link III/IV CSI-2 Serializers" + depends on OF && I2C && VIDEO_DEV + select I2C_ATR + select MEDIA_CONTROLLER + select OF_GPIO + select REGMAP_I2C + select V4L2_FWNODE + select VIDEO_V4L2_SUBDEV_API + help + Device driver for the Texas Instruments DS90UB953 + FPD-Link III Serializer and DS90UB971 FPD-Link IV Serializer. + config VIDEO_DS90UB960 tristate "TI FPD-Link III/IV Deserializers" depends on OF && I2C && VIDEO_DEV diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile index 2ae5256bb585..88e5ba3e5c39 100644 --- a/drivers/media/i2c/Makefile +++ b/drivers/media/i2c/Makefile @@ -29,6 +29,7 @@ obj-$(CONFIG_VIDEO_CS5345) += cs5345.o obj-$(CONFIG_VIDEO_CS53L32A) += cs53l32a.o obj-$(CONFIG_VIDEO_CX25840) += cx25840/ obj-$(CONFIG_VIDEO_DS90UB913) += ds90ub913.o +obj-$(CONFIG_VIDEO_DS90UB953) += ds90ub953.o obj-$(CONFIG_VIDEO_DS90UB960) += ds90ub960.o obj-$(CONFIG_VIDEO_DW9714) += dw9714.o obj-$(CONFIG_VIDEO_DW9768) += dw9768.o diff --git a/drivers/media/i2c/ds90ub953.c b/drivers/media/i2c/ds90ub953.c new file mode 100644 index 000000000000..1e3827a60029 --- /dev/null +++ b/drivers/media/i2c/ds90ub953.c @@ -0,0 +1,1400 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Driver for the Texas Instruments DS90UB953 video serializer + * + * Based on a driver from Luca Ceresoli + * + * Copyright (c) 2019 Luca Ceresoli + * Copyright (c) 2023 Tomi Valkeinen + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#define UB953_PAD_SINK 0 +#define UB953_PAD_SOURCE 1 + +#define UB953_NUM_GPIOS 4 + +#define UB953_REG_RESET_CTL 0x01 +#define UB953_REG_RESET_CTL_DIGITAL_RESET_1 BIT(1) +#define UB953_REG_RESET_CTL_DIGITAL_RESET_0 BIT(0) + +#define UB953_REG_GENERAL_CFG 0x02 +#define UB953_REG_GENERAL_CFG_CONT_CLK BIT(6) +#define UB953_REG_GENERAL_CFG_CSI_LANE_SEL_SHIFT 4 +#define UB953_REG_GENERAL_CFG_CSI_LANE_SEL_MASK GENMASK(5, 4) +#define UB953_REG_GENERAL_CFG_CRC_TX_GEN_ENABLE BIT(1) +#define UB953_REG_GENERAL_CFG_I2C_STRAP_MODE BIT(0) + +#define UB953_REG_MODE_SEL 0x03 +#define UB953_REG_MODE_SEL_MODE_DONE BIT(3) +#define UB953_REG_MODE_SEL_MODE_OVERRIDE BIT(4) +#define UB953_REG_MODE_SEL_MODE_MASK GENMASK(2, 0) + +#define UB953_REG_CLKOUT_CTRL0 0x06 +#define UB953_REG_CLKOUT_CTRL1 0x07 + +#define UB953_REG_SCL_HIGH_TIME 0x0b +#define UB953_REG_SCL_LOW_TIME 0x0c + +#define UB953_REG_LOCAL_GPIO_DATA 0x0d +#define UB953_REG_LOCAL_GPIO_DATA_GPIO_RMTEN(n) BIT(4 + (n)) +#define UB953_REG_LOCAL_GPIO_DATA_GPIO_OUT_SRC(n) BIT(0 + (n)) + +#define UB953_REG_GPIO_INPUT_CTRL 0x0e +#define UB953_REG_GPIO_INPUT_CTRL_OUT_EN(n) BIT(4 + (n)) +#define UB953_REG_GPIO_INPUT_CTRL_INPUT_EN(n) BIT(0 + (n)) + +#define UB953_REG_REV_MASK_ID 0x50 +#define UB953_REG_GENERAL_STATUS 0x52 + +#define UB953_REG_GPIO_PIN_STS 0x53 +#define UB953_REG_GPIO_PIN_STS_GPIO_STS(n) BIT(0 + (n)) + +#define UB953_REG_BIST_ERR_CNT 0x54 +#define UB953_REG_CRC_ERR_CNT1 0x55 +#define UB953_REG_CRC_ERR_CNT2 0x56 + +#define UB953_REG_CSI_ERR_CNT 0x5c +#define UB953_REG_CSI_ERR_STATUS 0x5d +#define UB953_REG_CSI_ERR_DLANE01 0x5e +#define UB953_REG_CSI_ERR_DLANE23 0x5f +#define UB953_REG_CSI_ERR_CLK_LANE 0x60 +#define UB953_REG_CSI_PKT_HDR_VC_ID 0x61 +#define UB953_REG_PKT_HDR_WC_LSB 0x62 +#define UB953_REG_PKT_HDR_WC_MSB 0x63 +#define UB953_REG_CSI_ECC 0x64 + +#define UB953_REG_IND_ACC_CTL 0xb0 +#define UB953_REG_IND_ACC_ADDR 0xb1 +#define UB953_REG_IND_ACC_DATA 0xb2 + +#define UB953_REG_FPD3_RX_ID(n) (0xf0 + (n)) +#define UB953_REG_FPD3_RX_ID_LEN 6 + +/* Indirect register blocks */ +#define UB953_IND_TARGET_PAT_GEN 0x00 +#define UB953_IND_TARGET_FPD3_TX 0x01 +#define UB953_IND_TARGET_DIE_ID 0x02 + +#define UB953_IND_PGEN_CTL 0x01 +#define UB953_IND_PGEN_CTL_PGEN_ENABLE BIT(0) +#define UB953_IND_PGEN_CFG 0x02 +#define UB953_IND_PGEN_CSI_DI 0x03 +#define UB953_IND_PGEN_LINE_SIZE1 0x04 +#define UB953_IND_PGEN_LINE_SIZE0 0x05 +#define UB953_IND_PGEN_BAR_SIZE1 0x06 +#define UB953_IND_PGEN_BAR_SIZE0 0x07 +#define UB953_IND_PGEN_ACT_LPF1 0x08 +#define UB953_IND_PGEN_ACT_LPF0 0x09 +#define UB953_IND_PGEN_TOT_LPF1 0x0a +#define UB953_IND_PGEN_TOT_LPF0 0x0b +#define UB953_IND_PGEN_LINE_PD1 0x0c +#define UB953_IND_PGEN_LINE_PD0 0x0d +#define UB953_IND_PGEN_VBP 0x0e +#define UB953_IND_PGEN_VFP 0x0f +#define UB953_IND_PGEN_COLOR(n) (0x10 + (n)) /* n <= 15 */ + +/* Note: Only sync mode supported for now */ +enum ub953_mode { + /* FPD-Link III CSI-2 synchronous mode */ + UB953_MODE_SYNC, + /* FPD-Link III CSI-2 non-synchronous mode, external ref clock */ + UB953_MODE_NONSYNC_EXT, + /* FPD-Link III CSI-2 non-synchronous mode, internal ref clock */ + UB953_MODE_NONSYNC_INT, + /* FPD-Link III DVP mode */ + UB953_MODE_DVP, +}; + +struct ub953_hw_data { + const char *model; + bool is_ub971; +}; + +struct ub953_data { + const struct ub953_hw_data *hw_data; + + struct i2c_client *client; + struct regmap *regmap; + + u32 num_data_lanes; + + struct gpio_chip gpio_chip; + + struct v4l2_subdev sd; + struct media_pad pads[2]; + + struct v4l2_async_notifier notifier; + + struct v4l2_subdev *source_sd; + u16 source_sd_pad; + + u64 enabled_source_streams; + + /* lock for register access */ + struct mutex reg_lock; + + u8 current_indirect_target; + + struct clk_hw clkout_clk_hw; + + enum ub953_mode mode; + + const struct ds90ub9xx_platform_data *plat_data; +}; + +static inline struct ub953_data *sd_to_ub953(struct v4l2_subdev *sd) +{ + return container_of(sd, struct ub953_data, sd); +} + +/* + * HW Access + */ + +static int ub953_read(struct ub953_data *priv, u8 reg, u8 *val) +{ + unsigned int v; + int ret; + + mutex_lock(&priv->reg_lock); + + ret = regmap_read(priv->regmap, reg, &v); + if (ret) { + dev_err(&priv->client->dev, "Cannot read register 0x%02x: %d\n", + reg, ret); + goto out_unlock; + } + + *val = v; + +out_unlock: + mutex_unlock(&priv->reg_lock); + + return ret; +} + +static int ub953_write(struct ub953_data *priv, u8 reg, u8 val) +{ + int ret; + + mutex_lock(&priv->reg_lock); + + ret = regmap_write(priv->regmap, reg, val); + if (ret) + dev_err(&priv->client->dev, + "Cannot write register 0x%02x: %d\n", reg, ret); + + mutex_unlock(&priv->reg_lock); + + return ret; +} + +static int ub953_select_ind_reg_block(struct ub953_data *priv, u8 block) +{ + struct device *dev = &priv->client->dev; + int ret; + + if (priv->current_indirect_target == block) + return 0; + + ret = regmap_write(priv->regmap, UB953_REG_IND_ACC_CTL, block << 2); + if (ret) { + dev_err(dev, "%s: cannot select indirect target %u (%d)\n", + __func__, block, ret); + return ret; + } + + priv->current_indirect_target = block; + + return 0; +} + +__maybe_unused +static int ub953_read_ind(struct ub953_data *priv, u8 block, u8 reg, u8 *val) +{ + unsigned int v; + int ret; + + mutex_lock(&priv->reg_lock); + + ret = ub953_select_ind_reg_block(priv, block); + if (ret) + goto out_unlock; + + ret = regmap_write(priv->regmap, UB953_REG_IND_ACC_ADDR, reg); + if (ret) { + dev_err(&priv->client->dev, + "Write to IND_ACC_ADDR failed when reading %u:%x02x: %d\n", + block, reg, ret); + goto out_unlock; + } + + ret = regmap_read(priv->regmap, UB953_REG_IND_ACC_DATA, &v); + if (ret) { + dev_err(&priv->client->dev, + "Write to IND_ACC_DATA failed when reading %u:%x02x: %d\n", + block, reg, ret); + goto out_unlock; + } + + *val = v; + +out_unlock: + mutex_unlock(&priv->reg_lock); + + return ret; +} + +__maybe_unused +static int ub953_write_ind(struct ub953_data *priv, u8 block, u8 reg, u8 val) +{ + int ret; + + mutex_lock(&priv->reg_lock); + + ret = ub953_select_ind_reg_block(priv, block); + if (ret) + goto out_unlock; + + ret = regmap_write(priv->regmap, UB953_REG_IND_ACC_ADDR, reg); + if (ret) { + dev_err(&priv->client->dev, + "Write to IND_ACC_ADDR failed when writing %u:%x02x: %d\n", + block, reg, ret); + goto out_unlock; + } + + ret = regmap_write(priv->regmap, UB953_REG_IND_ACC_DATA, val); + if (ret) { + dev_err(&priv->client->dev, + "Write to IND_ACC_DATA failed when writing %u:%x02x\n: %d\n", + block, reg, ret); + } + +out_unlock: + mutex_unlock(&priv->reg_lock); + + return ret; +} + +/* + * GPIO chip + */ +static int ub953_gpio_get_direction(struct gpio_chip *gc, unsigned int offset) +{ + struct ub953_data *priv = gpiochip_get_data(gc); + int ret; + u8 v; + + ret = ub953_read(priv, UB953_REG_GPIO_INPUT_CTRL, &v); + if (ret) + return ret; + + if (v & UB953_REG_GPIO_INPUT_CTRL_INPUT_EN(offset)) + return GPIO_LINE_DIRECTION_IN; + else + return GPIO_LINE_DIRECTION_OUT; +} + +static int ub953_gpio_direction_in(struct gpio_chip *gc, unsigned int offset) +{ + struct ub953_data *priv = gpiochip_get_data(gc); + + return regmap_update_bits(priv->regmap, UB953_REG_GPIO_INPUT_CTRL, + UB953_REG_GPIO_INPUT_CTRL_INPUT_EN(offset) | + UB953_REG_GPIO_INPUT_CTRL_OUT_EN(offset), + UB953_REG_GPIO_INPUT_CTRL_INPUT_EN(offset)); +} + +static int ub953_gpio_direction_out(struct gpio_chip *gc, unsigned int offset, + int value) +{ + struct ub953_data *priv = gpiochip_get_data(gc); + int ret; + + ret = regmap_update_bits(priv->regmap, UB953_REG_LOCAL_GPIO_DATA, + UB953_REG_LOCAL_GPIO_DATA_GPIO_OUT_SRC(offset), + value ? UB953_REG_LOCAL_GPIO_DATA_GPIO_OUT_SRC(offset) : + 0); + + if (ret) + return ret; + + return regmap_update_bits(priv->regmap, UB953_REG_GPIO_INPUT_CTRL, + UB953_REG_GPIO_INPUT_CTRL_INPUT_EN(offset) | + UB953_REG_GPIO_INPUT_CTRL_OUT_EN(offset), + UB953_REG_GPIO_INPUT_CTRL_OUT_EN(offset)); +} + +static int ub953_gpio_get(struct gpio_chip *gc, unsigned int offset) +{ + struct ub953_data *priv = gpiochip_get_data(gc); + int ret; + u8 v; + + ret = ub953_read(priv, UB953_REG_GPIO_PIN_STS, &v); + if (ret) + return ret; + + return !!(v & UB953_REG_GPIO_PIN_STS_GPIO_STS(offset)); +} + +static void ub953_gpio_set(struct gpio_chip *gc, unsigned int offset, int value) +{ + struct ub953_data *priv = gpiochip_get_data(gc); + + regmap_update_bits(priv->regmap, UB953_REG_LOCAL_GPIO_DATA, + UB953_REG_LOCAL_GPIO_DATA_GPIO_OUT_SRC(offset), + value ? UB953_REG_LOCAL_GPIO_DATA_GPIO_OUT_SRC(offset) : + 0); +} + +static int ub953_gpio_of_xlate(struct gpio_chip *gc, + const struct of_phandle_args *gpiospec, + u32 *flags) +{ + if (flags) + *flags = gpiospec->args[1]; + + return gpiospec->args[0]; +} + +static int ub953_gpiochip_probe(struct ub953_data *priv) +{ + struct device *dev = &priv->client->dev; + struct gpio_chip *gc = &priv->gpio_chip; + int ret; + + /* Set all GPIOs to local input mode */ + ub953_write(priv, UB953_REG_LOCAL_GPIO_DATA, 0); + ub953_write(priv, UB953_REG_GPIO_INPUT_CTRL, 0xf); + + gc->label = dev_name(dev); + gc->parent = dev; + gc->owner = THIS_MODULE; + gc->base = -1; + gc->can_sleep = true; + gc->ngpio = UB953_NUM_GPIOS; + gc->get_direction = ub953_gpio_get_direction; + gc->direction_input = ub953_gpio_direction_in; + gc->direction_output = ub953_gpio_direction_out; + gc->get = ub953_gpio_get; + gc->set = ub953_gpio_set; + gc->of_xlate = ub953_gpio_of_xlate; + gc->of_gpio_n_cells = 2; + + ret = gpiochip_add_data(gc, priv); + if (ret) { + dev_err(dev, "Failed to add GPIOs: %d\n", ret); + return ret; + } + + return 0; +} + +static void ub953_gpiochip_remove(struct ub953_data *priv) +{ + gpiochip_remove(&priv->gpio_chip); +} + +/* + * V4L2 + */ + +static int _ub953_set_routing(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + struct v4l2_subdev_krouting *routing) +{ + static const struct v4l2_mbus_framefmt format = { + .width = 640, + .height = 480, + .code = MEDIA_BUS_FMT_UYVY8_1X16, + .field = V4L2_FIELD_NONE, + .colorspace = V4L2_COLORSPACE_SRGB, + .ycbcr_enc = V4L2_YCBCR_ENC_601, + .quantization = V4L2_QUANTIZATION_LIM_RANGE, + .xfer_func = V4L2_XFER_FUNC_SRGB, + }; + int ret; + + /* + * Note: we can only support up to V4L2_FRAME_DESC_ENTRY_MAX, until + * frame desc is made dynamically allocated. + */ + + if (routing->num_routes > V4L2_FRAME_DESC_ENTRY_MAX) + return -EINVAL; + + ret = v4l2_subdev_routing_validate(sd, routing, + V4L2_SUBDEV_ROUTING_ONLY_1_TO_1); + if (ret) + return ret; + + ret = v4l2_subdev_set_routing_with_fmt(sd, state, routing, &format); + if (ret) + return ret; + + return 0; +} + +static int ub953_set_routing(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + enum v4l2_subdev_format_whence which, + struct v4l2_subdev_krouting *routing) +{ + struct ub953_data *priv = sd_to_ub953(sd); + + if (which == V4L2_SUBDEV_FORMAT_ACTIVE && priv->enabled_source_streams) + return -EBUSY; + + return _ub953_set_routing(sd, state, routing); +} + +static int ub953_get_frame_desc(struct v4l2_subdev *sd, unsigned int pad, + struct v4l2_mbus_frame_desc *fd) +{ + struct ub953_data *priv = sd_to_ub953(sd); + struct v4l2_mbus_frame_desc source_fd; + struct v4l2_subdev_route *route; + struct v4l2_subdev_state *state; + int ret; + + if (pad != UB953_PAD_SOURCE) + return -EINVAL; + + ret = v4l2_subdev_call(priv->source_sd, pad, get_frame_desc, + priv->source_sd_pad, &source_fd); + if (ret) + return ret; + + memset(fd, 0, sizeof(*fd)); + + fd->type = V4L2_MBUS_FRAME_DESC_TYPE_CSI2; + + state = v4l2_subdev_lock_and_get_active_state(sd); + + for_each_active_route(&state->routing, route) { + struct v4l2_mbus_frame_desc_entry *source_entry = NULL; + unsigned int i; + + if (route->source_pad != pad) + continue; + + for (i = 0; i < source_fd.num_entries; i++) { + if (source_fd.entry[i].stream == route->sink_stream) { + source_entry = &source_fd.entry[i]; + break; + } + } + + if (!source_entry) { + dev_err(&priv->client->dev, + "Failed to find stream from source frame desc\n"); + ret = -EPIPE; + goto out_unlock; + } + + fd->entry[fd->num_entries].stream = route->source_stream; + fd->entry[fd->num_entries].flags = source_entry->flags; + fd->entry[fd->num_entries].length = source_entry->length; + fd->entry[fd->num_entries].pixelcode = source_entry->pixelcode; + fd->entry[fd->num_entries].bus.csi2.vc = + source_entry->bus.csi2.vc; + fd->entry[fd->num_entries].bus.csi2.dt = + source_entry->bus.csi2.dt; + + fd->num_entries++; + } + +out_unlock: + v4l2_subdev_unlock_state(state); + + return ret; +} + +static int ub953_set_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + struct v4l2_subdev_format *format) +{ + struct ub953_data *priv = sd_to_ub953(sd); + struct v4l2_mbus_framefmt *fmt; + + if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE && + priv->enabled_source_streams) + return -EBUSY; + + /* No transcoding, source and sink formats must match. */ + if (format->pad == UB953_PAD_SOURCE) + return v4l2_subdev_get_fmt(sd, state, format); + + /* Set sink format */ + fmt = v4l2_subdev_state_get_stream_format(state, format->pad, + format->stream); + if (!fmt) + return -EINVAL; + + *fmt = format->format; + + /* Propagate to source format */ + fmt = v4l2_subdev_state_get_opposite_stream_format(state, format->pad, + format->stream); + if (!fmt) + return -EINVAL; + + *fmt = format->format; + + return 0; +} + +static int ub953_init_cfg(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state) +{ + struct v4l2_subdev_route routes[] = { + { + .sink_pad = UB953_PAD_SINK, + .sink_stream = 0, + .source_pad = UB953_PAD_SOURCE, + .source_stream = 0, + .flags = V4L2_SUBDEV_ROUTE_FL_ACTIVE, + }, + }; + + struct v4l2_subdev_krouting routing = { + .num_routes = ARRAY_SIZE(routes), + .routes = routes, + }; + + return _ub953_set_routing(sd, state, &routing); +} + +static int ub953_log_status(struct v4l2_subdev *sd) +{ + struct ub953_data *priv = sd_to_ub953(sd); + struct device *dev = &priv->client->dev; + u8 v = 0, v1 = 0, v2 = 0; + unsigned int i; + char id[UB953_REG_FPD3_RX_ID_LEN]; + u8 gpio_local_data; + u8 gpio_input_ctrl; + u8 gpio_pin_sts; + + for (i = 0; i < sizeof(id); i++) + ub953_read(priv, UB953_REG_FPD3_RX_ID(i), &id[i]); + + dev_info(dev, "ID '%.*s'\n", (int)sizeof(id), id); + + ub953_read(priv, UB953_REG_GENERAL_STATUS, &v); + dev_info(dev, "GENERAL_STATUS %#02x\n", v); + + ub953_read(priv, UB953_REG_CRC_ERR_CNT1, &v1); + ub953_read(priv, UB953_REG_CRC_ERR_CNT2, &v2); + dev_info(dev, "CRC error count %u\n", v1 | (v2 << 8)); + + ub953_read(priv, UB953_REG_CSI_ERR_CNT, &v); + dev_info(dev, "CSI error count %u\n", v); + + ub953_read(priv, UB953_REG_CSI_ERR_STATUS, &v); + dev_info(dev, "CSI_ERR_STATUS %#02x\n", v); + + ub953_read(priv, UB953_REG_CSI_ERR_DLANE01, &v); + dev_info(dev, "CSI_ERR_DLANE01 %#02x\n", v); + + ub953_read(priv, UB953_REG_CSI_ERR_DLANE23, &v); + dev_info(dev, "CSI_ERR_DLANE23 %#02x\n", v); + + ub953_read(priv, UB953_REG_CSI_ERR_CLK_LANE, &v); + dev_info(dev, "CSI_ERR_CLK_LANE %#02x\n", v); + + ub953_read(priv, UB953_REG_CSI_PKT_HDR_VC_ID, &v); + dev_info(dev, "CSI packet header VC %u ID %u\n", v >> 6, v & 0x3f); + + ub953_read(priv, UB953_REG_PKT_HDR_WC_LSB, &v1); + ub953_read(priv, UB953_REG_PKT_HDR_WC_MSB, &v2); + dev_info(dev, "CSI packet header WC %u\n", (v2 << 8) | v1); + + ub953_read(priv, UB953_REG_CSI_ECC, &v); + dev_info(dev, "CSI ECC %#02x\n", v); + + ub953_read(priv, UB953_REG_LOCAL_GPIO_DATA, &gpio_local_data); + ub953_read(priv, UB953_REG_GPIO_INPUT_CTRL, &gpio_input_ctrl); + ub953_read(priv, UB953_REG_GPIO_PIN_STS, &gpio_pin_sts); + + for (i = 0; i < UB953_NUM_GPIOS; i++) { + dev_info(dev, + "GPIO%u: remote: %u is_input: %u is_output: %u val: %u sts: %u\n", + i, + !!(gpio_local_data & UB953_REG_LOCAL_GPIO_DATA_GPIO_RMTEN(i)), + !!(gpio_input_ctrl & UB953_REG_GPIO_INPUT_CTRL_INPUT_EN(i)), + !!(gpio_input_ctrl & UB953_REG_GPIO_INPUT_CTRL_OUT_EN(i)), + !!(gpio_local_data & UB953_REG_LOCAL_GPIO_DATA_GPIO_OUT_SRC(i)), + !!(gpio_pin_sts & UB953_REG_GPIO_PIN_STS_GPIO_STS(i))); + } + + return 0; +} + +static int ub953_enable_streams(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, u32 pad, + u64 streams_mask) +{ + struct ub953_data *priv = sd_to_ub953(sd); + u64 sink_streams; + int ret; + + sink_streams = v4l2_subdev_state_xlate_streams(state, UB953_PAD_SOURCE, + UB953_PAD_SINK, + &streams_mask); + + ret = v4l2_subdev_enable_streams(priv->source_sd, priv->source_sd_pad, + sink_streams); + if (ret) + return ret; + + priv->enabled_source_streams |= streams_mask; + + return 0; +} + +static int ub953_disable_streams(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, u32 pad, + u64 streams_mask) +{ + struct ub953_data *priv = sd_to_ub953(sd); + u64 sink_streams; + int ret; + + sink_streams = v4l2_subdev_state_xlate_streams(state, UB953_PAD_SOURCE, + UB953_PAD_SINK, + &streams_mask); + + ret = v4l2_subdev_disable_streams(priv->source_sd, priv->source_sd_pad, + sink_streams); + if (ret) + return ret; + + priv->enabled_source_streams &= ~streams_mask; + + return 0; +} + +static const struct v4l2_subdev_pad_ops ub953_pad_ops = { + .enable_streams = ub953_enable_streams, + .disable_streams = ub953_disable_streams, + .set_routing = ub953_set_routing, + .get_frame_desc = ub953_get_frame_desc, + .get_fmt = v4l2_subdev_get_fmt, + .set_fmt = ub953_set_fmt, + .init_cfg = ub953_init_cfg, +}; + +static const struct v4l2_subdev_core_ops ub953_subdev_core_ops = { + .log_status = ub953_log_status, + .subscribe_event = v4l2_ctrl_subdev_subscribe_event, + .unsubscribe_event = v4l2_event_subdev_unsubscribe, +}; + +static const struct v4l2_subdev_ops ub953_subdev_ops = { + .core = &ub953_subdev_core_ops, + .pad = &ub953_pad_ops, +}; + +static const struct media_entity_operations ub953_entity_ops = { + .link_validate = v4l2_subdev_link_validate, +}; + +static int ub953_notify_bound(struct v4l2_async_notifier *notifier, + struct v4l2_subdev *source_subdev, + struct v4l2_async_subdev *asd) +{ + struct ub953_data *priv = sd_to_ub953(notifier->sd); + struct device *dev = &priv->client->dev; + int ret; + + ret = media_entity_get_fwnode_pad(&source_subdev->entity, + source_subdev->fwnode, + MEDIA_PAD_FL_SOURCE); + if (ret < 0) { + dev_err(dev, "Failed to find pad for %s\n", + source_subdev->name); + return ret; + } + + priv->source_sd = source_subdev; + priv->source_sd_pad = ret; + + ret = media_create_pad_link(&source_subdev->entity, priv->source_sd_pad, + &priv->sd.entity, 0, + MEDIA_LNK_FL_ENABLED | + MEDIA_LNK_FL_IMMUTABLE); + if (ret) { + dev_err(dev, "Unable to link %s:%u -> %s:0\n", + source_subdev->name, priv->source_sd_pad, + priv->sd.name); + return ret; + } + + return 0; +} + +static const struct v4l2_async_notifier_operations ub953_notify_ops = { + .bound = ub953_notify_bound, +}; + +static int ub953_v4l2_notifier_register(struct ub953_data *priv) +{ + struct device *dev = &priv->client->dev; + struct v4l2_async_subdev *asd; + struct fwnode_handle *ep_fwnode; + int ret; + + ep_fwnode = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev), + UB953_PAD_SINK, 0, 0); + if (!ep_fwnode) { + dev_err(dev, "No graph endpoint\n"); + return -ENODEV; + } + + v4l2_async_nf_init(&priv->notifier); + + asd = v4l2_async_nf_add_fwnode_remote(&priv->notifier, ep_fwnode, + struct v4l2_async_subdev); + + fwnode_handle_put(ep_fwnode); + + if (IS_ERR(asd)) { + dev_err(dev, "Failed to add subdev: %ld", PTR_ERR(asd)); + v4l2_async_nf_cleanup(&priv->notifier); + return PTR_ERR(asd); + } + + priv->notifier.ops = &ub953_notify_ops; + + ret = v4l2_async_subdev_nf_register(&priv->sd, &priv->notifier); + if (ret) { + dev_err(dev, "Failed to register subdev_notifier"); + v4l2_async_nf_cleanup(&priv->notifier); + return ret; + } + + return 0; +} + +static void ub953_v4l2_notifier_unregister(struct ub953_data *priv) +{ + v4l2_async_nf_unregister(&priv->notifier); + v4l2_async_nf_cleanup(&priv->notifier); +} + +/* + * Probing + */ + +static int ub953_i2c_master_init(struct ub953_data *priv) +{ + /* i2c fast mode */ + u32 ref = 26250000; + u32 scl_high = 915; /* ns */ + u32 scl_low = 1641; /* ns */ + int ret; + + scl_high = div64_u64((u64)scl_high * ref, 1000000000) - 5; + scl_low = div64_u64((u64)scl_low * ref, 1000000000) - 5; + + ret = ub953_write(priv, UB953_REG_SCL_HIGH_TIME, scl_high); + if (ret) + return ret; + + ret = ub953_write(priv, UB953_REG_SCL_LOW_TIME, scl_low); + if (ret) + return ret; + + return 0; +} + +static u64 ub953_get_fc_rate(struct ub953_data *priv) +{ + if (priv->mode != UB953_MODE_SYNC) { + /* Not supported */ + return 0; + } + + if (priv->hw_data->is_ub971) + return priv->plat_data->bc_rate * 160ull; + else + return priv->plat_data->bc_rate / 2 * 160ull; +} + +static unsigned long ub953_calc_clkout_ub953(struct ub953_data *priv, + unsigned long target, u64 fc, + u8 *hs_div, u8 *m, u8 *n) +{ + /* + * We always use 4 as a pre-divider (HS_CLK_DIV = 2). + * + * According to the datasheet: + * - "HS_CLK_DIV typically should be set to either 16, 8, or 4 (default)." + * - "if it is not possible to have an integer ratio of N/M, it is best to + * select a smaller value for HS_CLK_DIV. + * + * For above reasons the default HS_CLK_DIV seems the best in the average + * case. Use always that value to keep the code simple. + */ + static const unsigned long hs_clk_div = 4; + + u64 fc_divided; + unsigned long mul, div; + unsigned long res; + + /* clkout = fc / hs_clk_div * m / n */ + + fc_divided = div_u64(fc, hs_clk_div); + + rational_best_approximation(target, fc_divided, (1 << 5) - 1, + (1 << 8) - 1, &mul, &div); + + res = div_u64(fc_divided * mul, div); + + *hs_div = hs_clk_div; + *m = mul; + *n = div; + + return res; +} + +static unsigned long ub953_calc_clkout_ub971(struct ub953_data *priv, + unsigned long target, u64 fc, + u8 *m, u8 *n) +{ + u64 fc_divided; + unsigned long mul, div; + unsigned long res; + + /* clkout = fc * m / (8 * n) */ + + fc_divided = div_u64(fc, 8); + + rational_best_approximation(target, fc_divided, (1 << 5) - 1, + (1 << 8) - 1, &mul, &div); + + res = div_u64(fc_divided * mul, div); + + *m = mul; + *n = div; + + return res; +} + +static unsigned long ub953_clkout_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct ub953_data *priv = container_of(hw, struct ub953_data, clkout_clk_hw); + struct device *dev = &priv->client->dev; + u8 ctrl0, ctrl1; + u32 mul, div; + u64 fc_rate; + u32 hs_clk_div; + u64 rate; + int ret; + + ret = ub953_read(priv, UB953_REG_CLKOUT_CTRL0, &ctrl0); + if (ret) { + dev_err(dev, "Failed to read CLKOUT_CTRL0: %d\n", ret); + return 0; + } + + ret = ub953_read(priv, UB953_REG_CLKOUT_CTRL1, &ctrl1); + if (ret) { + dev_err(dev, "Failed to read CLKOUT_CTRL1: %d\n", ret); + return 0; + } + + fc_rate = ub953_get_fc_rate(priv); + + if (priv->hw_data->is_ub971) { + mul = ctrl0 & 0x1f; + div = ctrl1; + + if (div == 0) + return 0; + + rate = div_u64(fc_rate * mul, 8 * div); + + dev_dbg(dev, "clkout: fc rate %llu, mul %u, div %u = %llu\n", + fc_rate, mul, div, rate); + } else { + mul = ctrl0 & 0x1f; + hs_clk_div = 1 << (ctrl0 >> 5); + div = ctrl1; + + if (div == 0) + return 0; + + rate = div_u64(div_u64(fc_rate, hs_clk_div) * mul, div); + + dev_dbg(dev, + "clkout: fc rate %llu, hs_clk_div %u, mul %u, div %u = %llu\n", + fc_rate, hs_clk_div, mul, div, rate); + } + + return rate; +} + +static long ub953_clkout_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + struct ub953_data *priv = container_of(hw, struct ub953_data, clkout_clk_hw); + struct device *dev = &priv->client->dev; + unsigned long res; + u64 fc_rate; + u8 hs_div, m, n; + + fc_rate = ub953_get_fc_rate(priv); + + if (priv->hw_data->is_ub971) { + res = ub953_calc_clkout_ub971(priv, rate, fc_rate, &m, &n); + + dev_dbg(dev, "%s %llu * %u / (8 * %u) = %lu (requested %lu)", + __func__, fc_rate, m, n, res, rate); + } else { + res = ub953_calc_clkout_ub953(priv, rate, fc_rate, &hs_div, &m, &n); + + dev_dbg(dev, "%s %llu / %u * %u / %u = %lu (requested %lu)", + __func__, fc_rate, hs_div, m, n, res, rate); + } + + return res; +} + +static int ub953_clkout_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct ub953_data *priv = container_of(hw, struct ub953_data, clkout_clk_hw); + u64 fc_rate; + u8 hs_div, m, n; + unsigned long res; + + fc_rate = ub953_get_fc_rate(priv); + + if (priv->hw_data->is_ub971) { + res = ub953_calc_clkout_ub971(priv, rate, fc_rate, &m, &n); + + ub953_write(priv, UB953_REG_CLKOUT_CTRL0, m); + ub953_write(priv, UB953_REG_CLKOUT_CTRL1, n); + } else { + res = ub953_calc_clkout_ub953(priv, rate, fc_rate, &hs_div, &m, &n); + + ub953_write(priv, UB953_REG_CLKOUT_CTRL0, (__ffs(hs_div) << 5) | m); + ub953_write(priv, UB953_REG_CLKOUT_CTRL1, n); + } + + dev_dbg(&priv->client->dev, "%s %lu (requested %lu)\n", __func__, res, + rate); + + return 0; +} + +static const struct clk_ops ub953_clkout_ops = { + .recalc_rate = ub953_clkout_recalc_rate, + .round_rate = ub953_clkout_round_rate, + .set_rate = ub953_clkout_set_rate, +}; + +static void ub953_init_clkout_ub953(struct ub953_data *priv) +{ + u64 fc_rate; + u8 hs_div, m, n; + + fc_rate = ub953_get_fc_rate(priv); + + ub953_calc_clkout_ub953(priv, 25000000, fc_rate, &hs_div, &m, &n); + + ub953_write(priv, UB953_REG_CLKOUT_CTRL0, (__ffs(hs_div) << 5) | m); + ub953_write(priv, UB953_REG_CLKOUT_CTRL1, n); +} + +static void ub953_init_clkout_ub971(struct ub953_data *priv) +{ + u64 fc_rate; + u8 m, n; + + fc_rate = ub953_get_fc_rate(priv); + + ub953_calc_clkout_ub971(priv, 25000000, fc_rate, &m, &n); + + ub953_write(priv, UB953_REG_CLKOUT_CTRL0, m); + ub953_write(priv, UB953_REG_CLKOUT_CTRL1, n); +} + +static int ub953_register_clkout(struct ub953_data *priv) +{ + struct device *dev = &priv->client->dev; + const struct clk_init_data init = { + .name = kasprintf(GFP_KERNEL, "ds90%s.%s.clk_out", + priv->hw_data->model, dev_name(dev)), + .ops = &ub953_clkout_ops, + }; + int ret; + + if (!init.name) + return -ENOMEM; + + /* Initialize clkout to 25MHz by default */ + if (priv->hw_data->is_ub971) + ub953_init_clkout_ub971(priv); + else + ub953_init_clkout_ub953(priv); + + priv->clkout_clk_hw.init = &init; + + ret = devm_clk_hw_register(dev, &priv->clkout_clk_hw); + kfree(init.name); + if (ret) + return dev_err_probe(dev, ret, "Cannot register clock HW\n"); + + ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get, + &priv->clkout_clk_hw); + if (ret) + return dev_err_probe(dev, ret, + "Cannot add OF clock provider\n"); + + return 0; +} + +static int ub953_add_i2c_adapter(struct ub953_data *priv) +{ + struct device *dev = &priv->client->dev; + struct fwnode_handle *i2c_handle; + int ret; + + i2c_handle = device_get_named_child_node(dev, "i2c"); + if (!i2c_handle) + return 0; + + ret = i2c_atr_add_adapter(priv->plat_data->atr, priv->plat_data->port, + dev, i2c_handle); + + fwnode_handle_put(i2c_handle); + + if (ret) + return ret; + + return 0; +} + +static const struct regmap_config ub953_regmap_config = { + .name = "ds90ub953", + .reg_bits = 8, + .val_bits = 8, + .reg_format_endian = REGMAP_ENDIAN_DEFAULT, + .val_format_endian = REGMAP_ENDIAN_DEFAULT, +}; + +static int ub953_parse_dt(struct ub953_data *priv) +{ + struct device *dev = &priv->client->dev; + struct fwnode_handle *ep_fwnode; + int ret; + + ep_fwnode = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev), + UB953_PAD_SINK, 0, 0); + if (!ep_fwnode) + return dev_err_probe(dev, -ENOENT, "no endpoint found\n"); + + ret = fwnode_property_count_u32(ep_fwnode, "data-lanes"); + + fwnode_handle_put(ep_fwnode); + + if (ret < 0) + return dev_err_probe(dev, ret, + "failed to parse property 'data-lanes'\n"); + + if (ret != 1 && ret != 2 && ret != 4) + return dev_err_probe(dev, -EINVAL, + "bad number of data-lanes: %d\n", ret); + + priv->num_data_lanes = ret; + + return 0; +} + +static int ub953_hw_init(struct ub953_data *priv) +{ + struct device *dev = &priv->client->dev; + bool mode_override; + int ret; + u8 v; + + ret = ub953_read(priv, UB953_REG_MODE_SEL, &v); + if (ret) + return ret; + + if (!(v & UB953_REG_MODE_SEL_MODE_DONE)) + return dev_err_probe(dev, -EIO, "Mode value not stabilized\n"); + + mode_override = v & UB953_REG_MODE_SEL_MODE_OVERRIDE; + + switch (v & UB953_REG_MODE_SEL_MODE_MASK) { + case 0: + priv->mode = UB953_MODE_SYNC; + break; + case 2: + priv->mode = UB953_MODE_NONSYNC_EXT; + break; + case 3: + priv->mode = UB953_MODE_NONSYNC_INT; + break; + case 5: + priv->mode = UB953_MODE_DVP; + break; + default: + return dev_err_probe(dev, -EIO, + "Invalid mode in mode register\n"); + } + + dev_dbg(dev, "mode from %s: %#x\n", mode_override ? "reg" : "strap", + priv->mode); + + if (priv->mode != UB953_MODE_SYNC) + return dev_err_probe(dev, -ENODEV, + "Only synchronous mode supported\n"); + + ret = ub953_read(priv, UB953_REG_REV_MASK_ID, &v); + if (ret) + return dev_err_probe(dev, ret, "Failed to read revision"); + + dev_info(dev, "Found %s rev/mask %#04x\n", priv->hw_data->model, v); + + ret = ub953_read(priv, UB953_REG_GENERAL_CFG, &v); + if (ret) + return ret; + + dev_dbg(dev, "i2c strap setting %s V\n", + (v & UB953_REG_GENERAL_CFG_I2C_STRAP_MODE) ? "1.8" : "3.3"); + + ret = ub953_i2c_master_init(priv); + if (ret) + return dev_err_probe(dev, ret, "i2c init failed\n"); + + ub953_write(priv, UB953_REG_GENERAL_CFG, + UB953_REG_GENERAL_CFG_CONT_CLK | + ((priv->num_data_lanes - 1) << UB953_REG_GENERAL_CFG_CSI_LANE_SEL_SHIFT) | + UB953_REG_GENERAL_CFG_CRC_TX_GEN_ENABLE); + + return 0; +} + +static int ub953_subdev_init(struct ub953_data *priv) +{ + struct device *dev = &priv->client->dev; + int ret; + + v4l2_i2c_subdev_init(&priv->sd, priv->client, &ub953_subdev_ops); + + priv->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | + V4L2_SUBDEV_FL_HAS_EVENTS | V4L2_SUBDEV_FL_STREAMS; + priv->sd.entity.function = MEDIA_ENT_F_VID_IF_BRIDGE; + priv->sd.entity.ops = &ub953_entity_ops; + + priv->pads[0].flags = MEDIA_PAD_FL_SINK; + priv->pads[1].flags = MEDIA_PAD_FL_SOURCE; + + ret = media_entity_pads_init(&priv->sd.entity, 2, priv->pads); + if (ret) + return dev_err_probe(dev, ret, "Failed to init pads\n"); + + priv->sd.fwnode = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev), + UB953_PAD_SOURCE, 0, + 0); + if (!priv->sd.fwnode) { + ret = -ENODEV; + dev_err_probe(dev, ret, "Missing TX endpoint\n"); + goto err_entity_cleanup; + } + + ret = v4l2_subdev_init_finalize(&priv->sd); + if (ret) + goto err_fwnode_put; + + ret = ub953_v4l2_notifier_register(priv); + if (ret) { + dev_err_probe(dev, ret, + "v4l2 subdev notifier register failed\n"); + goto err_free_state; + } + + ret = v4l2_async_register_subdev(&priv->sd); + if (ret) { + dev_err_probe(dev, ret, "v4l2_async_register_subdev error\n"); + goto err_unreg_notif; + } + + return 0; + +err_unreg_notif: + ub953_v4l2_notifier_unregister(priv); +err_free_state: + v4l2_subdev_cleanup(&priv->sd); +err_fwnode_put: + fwnode_handle_put(priv->sd.fwnode); +err_entity_cleanup: + media_entity_cleanup(&priv->sd.entity); + + return ret; +} + +static void ub953_subdev_uninit(struct ub953_data *priv) +{ + v4l2_async_unregister_subdev(&priv->sd); + ub953_v4l2_notifier_unregister(priv); + v4l2_subdev_cleanup(&priv->sd); + fwnode_handle_put(priv->sd.fwnode); + media_entity_cleanup(&priv->sd.entity); +} + +static int ub953_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct ub953_data *priv; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->client = client; + + priv->hw_data = device_get_match_data(dev); + + priv->plat_data = dev_get_platdata(&client->dev); + if (!priv->plat_data) + return dev_err_probe(dev, -ENODEV, "Platform data missing\n"); + + mutex_init(&priv->reg_lock); + + /* + * Initialize to invalid values so that the first reg writes will + * configure the target. + */ + priv->current_indirect_target = 0xff; + + priv->regmap = devm_regmap_init_i2c(client, &ub953_regmap_config); + if (IS_ERR(priv->regmap)) { + ret = PTR_ERR(priv->regmap); + dev_err_probe(dev, ret, "Failed to init regmap\n"); + goto err_mutex_destroy; + } + + ret = ub953_parse_dt(priv); + if (ret) + goto err_mutex_destroy; + + ret = ub953_hw_init(priv); + if (ret) + goto err_mutex_destroy; + + ret = ub953_gpiochip_probe(priv); + if (ret) { + dev_err_probe(dev, ret, "Failed to init gpiochip\n"); + goto err_mutex_destroy; + } + + ret = ub953_register_clkout(priv); + if (ret) { + dev_err_probe(dev, ret, "Failed to register clkout\n"); + goto err_gpiochip_remove; + } + + ret = ub953_subdev_init(priv); + if (ret) + goto err_gpiochip_remove; + + ret = ub953_add_i2c_adapter(priv); + if (ret) { + dev_err_probe(dev, ret, "failed to add remote i2c adapter\n"); + goto err_subdev_uninit; + } + + return 0; + +err_subdev_uninit: + ub953_subdev_uninit(priv); +err_gpiochip_remove: + ub953_gpiochip_remove(priv); +err_mutex_destroy: + mutex_destroy(&priv->reg_lock); + + return ret; +} + +static void ub953_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct ub953_data *priv = sd_to_ub953(sd); + + i2c_atr_del_adapter(priv->plat_data->atr, priv->plat_data->port); + + ub953_subdev_uninit(priv); + + ub953_gpiochip_remove(priv); + mutex_destroy(&priv->reg_lock); +} + +static const struct ub953_hw_data ds90ub953_hw = { + .model = "ub953", +}; + +static const struct ub953_hw_data ds90ub971_hw = { + .model = "ub971", + .is_ub971 = true, +}; + +static const struct i2c_device_id ub953_id[] = { + { "ds90ub953-q1", (kernel_ulong_t)&ds90ub953_hw }, + { "ds90ub971-q1", (kernel_ulong_t)&ds90ub971_hw }, + {} +}; +MODULE_DEVICE_TABLE(i2c, ub953_id); + +static const struct of_device_id ub953_dt_ids[] = { + { .compatible = "ti,ds90ub953-q1", .data = &ds90ub953_hw }, + { .compatible = "ti,ds90ub971-q1", .data = &ds90ub971_hw }, + {} +}; +MODULE_DEVICE_TABLE(of, ub953_dt_ids); + +static struct i2c_driver ds90ub953_driver = { + .probe_new = ub953_probe, + .remove = ub953_remove, + .id_table = ub953_id, + .driver = { + .name = "ds90ub953", + .owner = THIS_MODULE, + .of_match_table = ub953_dt_ids, + }, +}; +module_i2c_driver(ds90ub953_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Texas Instruments FPD-Link III/IV CSI-2 Serializers Driver"); +MODULE_AUTHOR("Luca Ceresoli "); +MODULE_AUTHOR("Tomi Valkeinen "); +MODULE_IMPORT_NS(I2C_ATR);