| Message ID | 20221111101509.999589-4-waynec@nvidia.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Enable USB host and device functions on Jetson | expand |
On 11/11/22 22:36, Jon Hunter wrote: > > On 11/11/2022 10:14, Wayne Chang wrote: >> add device-tree binding documentation for Cypress cypd4226 type-C >> controller's I2C interface. It is a standard I2C slave with GPIO >> input as IRQ interface. >> >> Signed-off-by: Wayne Chang <waynec@nvidia.com> >> --- >> V1 -> V2:Based on the review comments. Fix some addressed issues on >> description, interrupts, cypress,firmware-build, connector, and >> additionalProperties properties. And also remove the status in the >> example. >> .../bindings/usb/cypress,cypd4226.yaml | 86 +++++++++++++++++++ >> 1 file changed, 86 insertions(+) >> create mode 100644 >> Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml >> >> diff --git >> a/Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml >> b/Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml >> new file mode 100644 >> index 000000000000..70db97e0ad31 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml >> @@ -0,0 +1,86 @@ >> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/usb/cypress,cypd4226.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: Cypress cypd4226 UCSI I2C Type-C Controller >> + >> +maintainers: >> + - Wayne Chang <waynec@nvidia.com> >> + >> +description: >> + The Cypress cypd4226 UCSI I2C type-C controller is a I2C interface >> type-C >> + controller. >> + >> +properties: >> + compatible: >> + const: cypress,cypd4226 >> + >> + '#address-cells': >> + const: 1 >> + >> + '#size-cells': >> + const: 0 >> + >> + reg: >> + const: 0x08 >> + >> + interrupts: >> + items: >> + - description: cypd4226 I2C interrupt >> + >> + cypress,firmware-build: >> + enum: >> + - nvidia,gpu >> + - nvidia,jetson-agx-xavier >> + description: | >> + the name of the CCGx firmware built for product series. >> + should be set one of following: >> + - "nvidia,gpu" for the NVIDIA RTX product series >> + - "nvidia,jetson-agx-xavier" for the NVIDIA Jetson product series >> + >> +patternProperties: >> + '^connector@[0-1]+$': >> + $ref: /schemas/connector/usb-connector.yaml# >> + properties: >> + reg: >> + maxItems: 1 >> + >> +unevaluatedProperties: false >> + >> +required: >> + - compatible >> + - reg >> + - interrupts >> + >> +examples: >> + - | >> + #include <dt-bindings/gpio/tegra194-gpio.h> >> + #include <dt-bindings/interrupt-controller/arm-gic.h> >> + i2c { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + #interrupt-cells = <2>; >> + >> + ucsi-ccg@8 { >> + compatible = "cypress,cypd4226"; >> + interrupt-parent = <&gpio_aon>; >> + interrupts = <TEGRA194_AON_GPIO(BB, 2) IRQ_TYPE_LEVEL_LOW>; >> + reg = <0x08>; >> + cypress,firmware-build = "nvidia,jetson-agx-xavier"; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + ccg_typec_con0: connector@0 { >> + compatible = "usb-c-connector"; >> + reg = <0>; >> + label = "USB-C"; >> + data-role = "dual"; >> + port { >> + ucsi_ccg_p0: endpoint { >> + remote-endpoint = <&usb_role_switch0>; >> + }; >> + }; >> + }; >> + }; >> + }; > > > I see warnings with this change ... > > Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml: > 'additionalProperties' is a required property > hint: A schema without a "$ref" to another schema must define all > properties and use "additionalProperties" > from schema $id: http://devicetree.org/meta-schemas/base.yaml# > > > Looking at Rob's comments I believe we need ... > > diff --git a/Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml > b/Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml > index 70db97e0ad31..8feafbaf9e20 100644 > --- a/Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml > +++ b/Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml > @@ -43,17 +43,19 @@ properties: > patternProperties: > '^connector@[0-1]+$': > $ref: /schemas/connector/usb-connector.yaml# > + unevaluatedProperties: false > properties: > reg: > maxItems: 1 > > -unevaluatedProperties: false > > required: > - compatible > - reg > - interrupts > > +additionalProperties: false > + > Thanks for the review. Somehow I do not get the warnings in local test. I'll apply the change into the next patch series. thanks, Wayne.
diff --git a/Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml b/Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml new file mode 100644 index 000000000000..70db97e0ad31 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/cypress,cypd4226.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cypress cypd4226 UCSI I2C Type-C Controller + +maintainers: + - Wayne Chang <waynec@nvidia.com> + +description: + The Cypress cypd4226 UCSI I2C type-C controller is a I2C interface type-C + controller. + +properties: + compatible: + const: cypress,cypd4226 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + reg: + const: 0x08 + + interrupts: + items: + - description: cypd4226 I2C interrupt + + cypress,firmware-build: + enum: + - nvidia,gpu + - nvidia,jetson-agx-xavier + description: | + the name of the CCGx firmware built for product series. + should be set one of following: + - "nvidia,gpu" for the NVIDIA RTX product series + - "nvidia,jetson-agx-xavier" for the NVIDIA Jetson product series + +patternProperties: + '^connector@[0-1]+$': + $ref: /schemas/connector/usb-connector.yaml# + properties: + reg: + maxItems: 1 + +unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include <dt-bindings/gpio/tegra194-gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <2>; + + ucsi-ccg@8 { + compatible = "cypress,cypd4226"; + interrupt-parent = <&gpio_aon>; + interrupts = <TEGRA194_AON_GPIO(BB, 2) IRQ_TYPE_LEVEL_LOW>; + reg = <0x08>; + cypress,firmware-build = "nvidia,jetson-agx-xavier"; + #address-cells = <1>; + #size-cells = <0>; + ccg_typec_con0: connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + label = "USB-C"; + data-role = "dual"; + port { + ucsi_ccg_p0: endpoint { + remote-endpoint = <&usb_role_switch0>; + }; + }; + }; + }; + };
add device-tree binding documentation for Cypress cypd4226 type-C controller's I2C interface. It is a standard I2C slave with GPIO input as IRQ interface. Signed-off-by: Wayne Chang <waynec@nvidia.com> --- V1 -> V2:Based on the review comments. Fix some addressed issues on description, interrupts, cypress,firmware-build, connector, and additionalProperties properties. And also remove the status in the example. .../bindings/usb/cypress,cypd4226.yaml | 86 +++++++++++++++++++ 1 file changed, 86 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/cypress,cypd4226.yaml