@@ -101,44 +101,6 @@ static int register_platform_devices(u32 station_id)
return 0;
}
-/* FIXME: this should eventually be done with generic P2SB discovery code
- * the individual drivers for watchdogs and LEDs access memory that implements
- * GPIO, but pinctrl will not come up because of missing ACPI entries
- *
- * While there is no conflict a cleaner solution would be to somehow bring up
- * pinctrl even with these ACPI entries missing, and base the drivers on pinctrl.
- * After which the following function could be dropped, together with the code
- * poking the memory.
- */
-/*
- * Get membase address from PCI, used in leds and wdt module. Here we read
- * the bar0. The final address calculation is done in the appropriate modules
- */
-u32 simatic_ipc_get_membase0(unsigned int p2sb)
-{
- struct pci_bus *bus;
- u32 bar0 = 0;
- /*
- * The GPIO memory is in bar0 of the hidden P2SB device.
- * Unhide the device to have a quick look at it, before we hide it
- * again.
- * Also grab the pci rescan lock so that device does not get discovered
- * and remapped while it is visible.
- * This code is inspired by drivers/mfd/lpc_ich.c
- */
- bus = pci_find_bus(0, 0);
- pci_lock_rescan_remove();
- pci_bus_write_config_byte(bus, p2sb, 0xE1, 0x0);
- pci_bus_read_config_dword(bus, p2sb, PCI_BASE_ADDRESS_0, &bar0);
-
- bar0 &= ~0xf;
- pci_bus_write_config_byte(bus, p2sb, 0xE1, 0x1);
- pci_unlock_rescan_remove();
-
- return bar0;
-}
-EXPORT_SYMBOL(simatic_ipc_get_membase0);
-
static int __init simatic_ipc_init_module(void)
{
const struct dmi_system_id *match;
@@ -24,6 +24,4 @@ struct simatic_ipc_platform {
u8 devmode;
};
-u32 simatic_ipc_get_membase0(unsigned int p2sb);
-
#endif /* __PLATFORM_DATA_X86_SIMATIC_IPC_BASE_H */