@@ -940,8 +940,7 @@ static irqreturn_t tegra_i2c_isr(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static void tegra_i2c_config_fifo_trig(struct tegra_i2c_dev *i2c_dev,
- size_t len)
+static int tegra_i2c_config_fifo_trig(struct tegra_i2c_dev *i2c_dev, size_t len)
{
u32 val, reg;
u8 dma_burst;
@@ -992,12 +991,10 @@ static void tegra_i2c_config_fifo_trig(struct tegra_i2c_dev *i2c_dev,
if (ret < 0) {
dev_err(i2c_dev->dev, "DMA slave config failed: %d\n",
ret);
- dev_err(i2c_dev->dev, "falling back to PIO\n");
- tegra_i2c_release_dma(i2c_dev);
- i2c_dev->is_curr_dma_xfer = false;
- } else {
- goto out;
+ return ret;
}
+
+ goto out;
}
if (i2c_dev->hw->has_mst_fifo)
@@ -1008,6 +1005,8 @@ static void tegra_i2c_config_fifo_trig(struct tegra_i2c_dev *i2c_dev,
I2C_FIFO_CONTROL_RX_TRIG(1);
out:
i2c_writel(i2c_dev, val, reg);
+
+ return 0;
}
static unsigned long
@@ -1141,7 +1140,10 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
i2c_dev->is_curr_dma_xfer = (xfer_size > I2C_PIO_MODE_PREFERRED_LEN) &&
i2c_dev->dma_buf &&
!i2c_dev->is_curr_atomic_xfer;
- tegra_i2c_config_fifo_trig(i2c_dev, xfer_size);
+
+ err = tegra_i2c_config_fifo_trig(i2c_dev, xfer_size);
+ if (err)
+ return err;
/*
* Transfer time in mSec = Total bits / transfer rate
The DMA code path has been tested well enough and the DMA configuration performed by tegra_i2c_config_fifo_trig() shouldn't ever fail in practice. Hence let's remove the obscure transfer-mode switching in order to have a cleaner and simpler code. Now I2C transfer will be failed if DMA configuration fails. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> --- drivers/i2c/busses/i2c-tegra.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-)