diff mbox series

[v2,05/17] i2c: tegra: Use reset_control_reset()

Message ID 20200901211102.11072-6-digetx@gmail.com
State Superseded
Headers show
Series Improvements for Tegra I2C driver | expand

Commit Message

Dmitry Osipenko Sept. 1, 2020, 9:10 p.m. UTC
Use a single reset_control_reset() instead of assert/deasset couple in
order to make code cleaner a tad. Note that the reset_control_reset()
uses 1 microsecond delay instead of 2 that was used previously, but this
shouldn't matter. In addition don't ignore potential error of the reset.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 drivers/i2c/busses/i2c-tegra.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 2da45ff32621..aa815e48f77e 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -790,9 +790,9 @@  static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev, bool clk_reinit)
 	u32 tsu_thd;
 	u8 tlow, thigh;
 
-	reset_control_assert(i2c_dev->rst);
-	udelay(2);
-	reset_control_deassert(i2c_dev->rst);
+	err = reset_control_reset(i2c_dev->rst);
+	if (WARN_ON_ONCE(err))
+		return err;
 
 	if (i2c_dev->is_dvc)
 		tegra_dvc_init(i2c_dev);