new file mode 100644
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/nuvoton,npcm7xx-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: nuvoton NPCM7XX I2C Controller Device Tree Bindings
+
+description: |
+ The NPCM750x includes sixteen I2C bus controllers. All Controllers support
+ both master and slave mode. Each controller can switch between master and slave
+ at run time (i.e. IPMB mode). Each controller has two 16 byte HW FIFO for TX and
+ RX.
+
+maintainers:
+ - Tali Perry <tali.perry1@gmail.com>
+
+properties:
+ compatible:
+ - const: nuvoton,npcm7xx-i2c
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+ items:
+ - description: Reference clock for the I2C bus
+
+ clock-frequency:
+ maxItems: 1
+ default: 100000
+ enum: [ 100000, 400000, 1000000 ]
+ description:
+ SCL frequency to use (in Hz). If omitted, 100kHz is used.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+allOf:
+ - $ref: /schemas/i2c/i2c-controller.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ i2c0: i2c@80000 {
+ compatible = "nuvoton,npcm750-i2c";
+ reg = <0x80000 0x1000>;
+ clocks = <&clk NPCM7XX_CLK_APB2>;
+ bus-frequency = <100000>;
+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&smb0_pins>;
+ };
+
+...
Added device tree binding documentation for Nuvoton BMC NPCM I2C controller. Signed-off-by: Tali Perry <tali.perry1@gmail.com> --- .../bindings/i2c/nuvoton,npcm7xx-i2c.yaml | 62 +++++++++++++++++++ 1 file changed, 62 insertions(+) create mode 100644 Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml