@@ -41,6 +41,8 @@
#define I2C_HANDSHAKE_RST 0x0020
#define I2C_FIFO_ADDR_CLR 0x0001
#define I2C_DELAY_LEN 0x0002
+#define I2C_ST_START_CON 0x8001
+#define I2C_FS_START_CON 0x1800
#define I2C_TIME_CLR_VALUE 0x0000
#define I2C_TIME_DEFAULT_VALUE 0x0003
#define I2C_WRRD_TRANAC_VALUE 0x0002
@@ -484,6 +486,7 @@ static void mtk_i2c_clock_disable(struct mtk_i2c *i2c)
static void mtk_i2c_init_hw(struct mtk_i2c *i2c)
{
u16 control_reg;
+ u16 ext_conf_val;
if (i2c->dev_comp->apdma_sync) {
writel(I2C_DMA_WARM_RST, i2c->pdmabase + OFFSET_RST);
@@ -518,8 +521,13 @@ static void mtk_i2c_init_hw(struct mtk_i2c *i2c)
if (i2c->dev_comp->ltiming_adjust)
mtk_i2c_writew(i2c, i2c->ltiming_reg, OFFSET_LTIMING);
+ if (i2c->speed_hz <= I2C_MAX_STANDARD_MODE_FREQ)
+ ext_conf_val = I2C_ST_START_CON;
+ else
+ ext_conf_val = I2C_FS_START_CON;
+
if (i2c->dev_comp->timing_adjust) {
- mtk_i2c_writew(i2c, i2c->ac_timing.ext, OFFSET_EXT_CONF);
+ ext_conf_val = i2c->ac_timing.ext;
mtk_i2c_writew(i2c, i2c->ac_timing.inter_clk_div,
OFFSET_CLOCK_DIV);
mtk_i2c_writew(i2c, I2C_SCL_MIS_COMP_VALUE,
@@ -544,6 +552,7 @@ static void mtk_i2c_init_hw(struct mtk_i2c *i2c)
OFFSET_HS_STA_STO_AC_TIMING);
}
}
+ mtk_i2c_writew(i2c, ext_conf_val, OFFSET_EXT_CONF);
/* If use i2c pin from PMIC mt6397 side, need set PATH_DIR first */
if (i2c->have_pmic)
In the commit be5ce0e97cc7 ("i2c: mediatek: Add i2c ac-timing adjust support"), we miss setting OFFSET_EXT_CONF register if i2c->dev_comp->timing_adjust is false, now add it back. Fixes: be5ce0e97cc7 ("i2c: mediatek: Add i2c ac-timing adjust support") Signed-off-by: Kewei Xu <kewei.xu@mediatek.com> --- drivers/i2c/busses/i2c-mt65xx.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)