diff mbox series

[2/2] dt-bindings: i2c: Add binding for Qualcomm CCI I2C controller

Message ID 1576867183-22668-2-git-send-email-loic.poulain@linaro.org
State New
Headers show
Series [1/2] i2c: Add Qualcomm CCI I2C driver | expand

Commit Message

Loic Poulain Dec. 20, 2019, 6:39 p.m. UTC 
From: Todor Tomov <todor.tomov@linaro.org>


Add DT binding document for Qualcomm Camera Control Interface (CCI)
I2C controller.

Signed-off-by: Todor Tomov <todor.tomov@linaro.org>

Signed-off-by: Vinod Koul <vkoul@kernel.org>

Reviewed-by: Rob Herring <robh@kernel.org>

---
 .../devicetree/bindings/i2c/i2c-qcom-cci.txt       | 83 ++++++++++++++++++++++
 1 file changed, 83 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt

-- 
2.7.4
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt b/Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt
new file mode 100644
index 0000000..691c7bd
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt
@@ -0,0 +1,83 @@ 
+Qualcomm Camera Control Interface (CCI) I2C controller
+
+PROPERTIES:
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be one of:
+		"qcom,msm8916-cci"
+		"qcom,msm8996-cci"
+
+- reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: base address CCI I2C controller and length of memory
+		    mapped region.
+
+- interrupts:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: specifies the CCI I2C interrupt. The format of the
+		    specifier is defined by the binding document describing
+		    the node's interrupt parent.
+
+- clocks:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: a list of phandle, should contain an entry for each
+		    entries in clock-names.
+
+- clock-names
+	Usage: required
+	Value type: <string>
+	Definition: a list of clock names, must include these entries:
+		"mmss_mmagic_ahb" - on "qcom,msm-8996-cci" only;
+		"camss_top_ahb";
+		"cci_ahb";
+		"cci";
+		"camss_ahb";
+
+- power-domains
+	Usage: required for "qcom,msm-8996-cci"
+	Value type: <prop-encoded-array>
+	Definition:
+
+SUBNODES:
+
+The CCI provides I2C masters for one or two i2c busses, described as
+subdevices named "i2c-bus@0" and "i2c-bus@1".
+
+PROPERTIES:
+
+- clock-frequency:
+	Usage: optional
+	Value type: <u32>
+	Definition: Desired I2C bus clock frequency in Hz, defaults to 100
+		    kHz if omitted.
+
+Example:
+
+	cci@a0c000 {
+		compatible = "qcom,msm-8996-cci";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0xa0c000 0x1000>;
+		interrupts = <GIC_SPI 295 IRQ_TYPE_EDGE_RISING>;
+		clocks = <&mmcc MMSS_MMAGIC_AHB_CLK>,
+                <&mmcc CAMSS_TOP_AHB_CLK>,
+                <&mmcc CAMSS_CCI_AHB_CLK>,
+                <&mmcc CAMSS_CCI_CLK>,
+                <&mmcc CAMSS_AHB_CLK>;
+		clock-names = "mmss_mmagic_ahb",
+			"camss_top_ahb",
+			"cci_ahb",
+			"cci",
+			"camss_ahb";
+		i2c-bus@0 {
+			clock-frequency = <400000>;
+		};
+		i2c-bus@1 {
+			clock-frequency = <400000>;
+		};
+	};