Show patches with: State = Action Required       |    Archived = No       |   3670 patches
« 1 2 ... 32 33 34 … 36 37 »
Patch Series S/W/F Date Submitter Delegate State
[v2,2/3] i2c: qup: Introduce SCL/SDA noise rejection QCOM QUP I2C - Add noise rejection, convert to YAML --- 2021-01-14 AngeloGioacchino Del Regno New
[v2,4/4] i2c: aspeed: add DMA mode transfer support i2c: aspeed: Add buffer and DMA modes support --- 2021-01-12 Jae Hyun Yoo New
[7/7] arm64: dts: qcom: sdm845: enable dma for spi Add and enable GPI DMA users --- 2021-01-11 Vinod Koul New
[5/7] i2c: qcom-geni: Add support for GPI DMA Add and enable GPI DMA users --- 2021-01-11 Vinod Koul New
[4/7] spi: spi-geni-qcom: Add support for GPI dma Add and enable GPI DMA users --- 2021-01-11 Vinod Koul New
[3/7] soc: qcom: geni: Add support for gpi dma Add and enable GPI DMA users --- 2021-01-11 Vinod Koul New
[2/7] soc: qcom: geni: move struct geni_wrapper to header Add and enable GPI DMA users --- 2021-01-11 Vinod Koul New
[1/7] soc: qcom: geni: move GENI_IF_DISABLE_RO to common header Add and enable GPI DMA users --- 2021-01-11 Vinod Koul New
i2c: tegra-bpmp: ignore DMA safe buffer flag i2c: tegra-bpmp: ignore DMA safe buffer flag --- 2021-01-11 Mikko Perttunen New
i2c: tegra: Wait for config load atomically while in ISR i2c: tegra: Wait for config load atomically while in ISR --- 2021-01-11 Mikko Perttunen New
[3/3] i2c: i2c-qcom-geni: Add support for 'assigned-performance-states' Add support for assigned-performance-states for geni i2c driver --- 2020-12-24 Roja Rani Yarubandi New
[2/3] arm64: dts: sc7180: Add assigned-performance-states for i2c Add support for assigned-performance-states for geni i2c driver --- 2020-12-24 Roja Rani Yarubandi New
[1/3] dt-bindings: power: Introduce 'assigned-performance-states' property Add support for assigned-performance-states for geni i2c driver --- 2020-12-24 Roja Rani Yarubandi New
[v2] i2c: sprd: use a specific timeout to avoid system hang up issue [v2] i2c: sprd: use a specific timeout to avoid system hang up issue --- 2020-12-14 Chunyan Zhang New
i2c: sprd: use a specific timeout to avoid system hang up issue i2c: sprd: use a specific timeout to avoid system hang up issue --- 2020-12-11 Chunyan Zhang New
[v2] i2c: add i2c bus driver for amd navi gpu [v2] i2c: add i2c bus driver for amd navi gpu --- 2020-12-08 Sanjay R Mehta New
i2c: mlxbf: Fix an error pointer vs NULL check i2c: mlxbf: Fix an error pointer vs NULL check --- 2020-12-04 Xu Wang New
i2c: mlxbf: select CONFIG_I2C_SLAVE i2c: mlxbf: select CONFIG_I2C_SLAVE --- 2020-12-03 Arnd Bergmann New
[RESEND,V6,1/2] i2c: i2c-qcom-geni: Store DMA mapping data in geni_i2c_dev struct Implement Shutdown callback for geni-i2c --- 2020-12-03 Roja Rani Yarubandi New
[v3] i2c: ismt: Use dma_set_mask_and_coherent [v3] i2c: ismt: Use dma_set_mask_and_coherent --- 2020-12-03 Youling Tang New
[1/4] dt-bindings: riscv: Update DT binding docs to support SiFive FU740 SoC arch: riscv: add board and SoC DT file support --- 2020-12-02 Yash Shah New
[7/8] i2c: stm32f7: fix reference leak when pm_runtime_get_sync fails i2c: fix reference leak when pm_runtime_get_sync fails --- 2020-12-01 'Qinglang Miao New
[18/18] ipu3: Add driver for dummy INT3472 ACPI device Add functionality to ipu3-cio2 driver allowing software_node connections to sensors on platforms ... --- 2020-11-30 Daniel Scally New
[17/18] gpio: gpiolib-acpi: Export acpi_get_gpiod() Add functionality to ipu3-cio2 driver allowing software_node connections to sensors on platforms ... --- 2020-11-30 Daniel Scally New
[16/18] i2c: i2c-core-base: Use the new i2c_acpi_dev_name() in i2c_set_dev_name() Add functionality to ipu3-cio2 driver allowing software_node connections to sensors on platforms ... --- 2020-11-30 Daniel Scally New
[15/18] i2c: i2c-core-acpi: Add i2c_acpi_dev_name() Add functionality to ipu3-cio2 driver allowing software_node connections to sensors on platforms ... --- 2020-11-30 Daniel Scally New
[14/18] acpi: utils: Add function to fetch dependent acpi_devices Add functionality to ipu3-cio2 driver allowing software_node connections to sensors on platforms ... --- 2020-11-30 Daniel Scally New
[13/18] ipu3-cio2: Add functionality allowing software_node connections to sensors on platforms designed for Windows Add functionality to ipu3-cio2 driver allowing software_node connections to sensors on platforms ... --- 2020-11-30 Daniel Scally New
[12/18] acpi: Add acpi_dev_get_next_match_dev() and macro to iterate through acpi_devices matching a given _HID Add functionality to ipu3-cio2 driver allowing software_node connections to sensors on platforms ... --- 2020-11-30 Daniel Scally New
[11/18] media: v4l2-core: v4l2-async: Check possible match in match_fwnode based on sd->fwnode->secondary Add functionality to ipu3-cio2 driver allowing software_node connections to sensors on platforms ... --- 2020-11-30 Daniel Scally New
[10/18] ipu3-cio2: Rename ipu3-cio2.c to allow module to be built from multiple source files retaining ipu3-cio2 name Add functionality to ipu3-cio2 driver allowing software_node connections to sensors on platforms ... --- 2020-11-30 Daniel Scally New
[07/18] software_node: Add support for fwnode_graph*() family of functions Add functionality to ipu3-cio2 driver allowing software_node connections to sensors on platforms ... --- 2020-11-30 Daniel Scally New
[06/18] software_node: amend software_node_unregister_node_group() to perform unregistration of array in reverse order to be consistent with software_node_unregister_nodes() Add functionality to ipu3-cio2 driver allowing software_node connections to sensors on platforms ... --- 2020-11-30 Daniel Scally New
[05/18] software_node: Alter software_node_unregister_nodes() to unregister the array in reverse order Add functionality to ipu3-cio2 driver allowing software_node connections to sensors on platforms ... --- 2020-11-30 Daniel Scally New
[04/18] software_node: Enforce parent before child ordering of nodes array for software_node_register_nodes() Add functionality to ipu3-cio2 driver allowing software_node connections to sensors on platforms ... --- 2020-11-30 Daniel Scally New
[03/18] software_node: Fix failure to put() and get() references to children in software_node_get_next_child() Add functionality to ipu3-cio2 driver allowing software_node connections to sensors on platforms ... --- 2020-11-30 Daniel Scally New
[02/18] property: Add support for calling fwnode_graph_get_endpoint_by_id() for fwnode->secondary Add functionality to ipu3-cio2 driver allowing software_node connections to sensors on platforms ... --- 2020-11-30 Daniel Scally New
[01/18] property: Return true in fwnode_device_is_available for node types that do not implement this operation Add functionality to ipu3-cio2 driver allowing software_node connections to sensors on platforms ... --- 2020-11-30 Daniel Scally New
[v2,3/3] dt-bindings:iio:gyro:invensense,mpu3050: txt to yaml format conversion. dt-bindings: yaml conversion of i2c-gate and IIO users --- 2020-11-28 Jonathan Cameron New
[v2,2/3] dt-bindings:iio:imu:invensense,mpu6050: txt to yaml conversion dt-bindings: yaml conversion of i2c-gate and IIO users --- 2020-11-28 Jonathan Cameron New
[v2,1/3] dt-bindings:i2c:i2c-gate: txt to yaml conversion dt-bindings: yaml conversion of i2c-gate and IIO users --- 2020-11-28 Jonathan Cameron New
[v2,11/18] MAINTAINERS: Update entry for Actions Semi Owl I2C binding Add CMU/RMU/DMA/MMC/I2C support for Actions Semi S500 SoCs --- 2020-11-19 Cristian Ciocaltea New
[Re-send:,i2c-next,6/6] i2c: mux: mlxcpld: Extend supported mux number [Re-send:,i2c-next,1/6] i2c: mux: mlxcpld: Update module license --- 2020-11-18 Vadim Pasternak New
[Re-send:,i2c-next,5/6] i2c: mux: mlxcpld: Extend driver to support word address space devices [Re-send:,i2c-next,1/6] i2c: mux: mlxcpld: Update module license --- 2020-11-18 Vadim Pasternak New
[v1] i2c: ismt: Adding support for I2C_SMBUS_BLOCK_PROC_CALL [v1] i2c: ismt: Adding support for I2C_SMBUS_BLOCK_PROC_CALL --- 2020-11-16 Andy Shevchenko New
[RFC,4/4] platform/x86: i2c-multi-instantiate: Add IRQ_RESOURCE_GPIO_OPTIONAL IRQ type platform/x86: i2c-multi-instantiate: Pass ACPI fwnode to instantiated i2c-clients --- 2020-11-05 Hans de Goede New
[RFC,2/4] platform/x86: i2c-multi-instantiate: Set i2c_board_info.irq to -ENOENT when no IRQ is specified platform/x86: i2c-multi-instantiate: Pass ACPI fwnode to instantiated i2c-clients --- 2020-11-05 Hans de Goede New
[v9,2/2] i2c: imx: select I2C_SLAVE by default Untitled series #74586 --- 2020-11-02 Biwen Li (OSS) New
[5/5] i2c: stm32: remove unnecessary CONFIG_PM_SLEEP [1/5] i2c: qup: remove unnecessary CONFIG_PM_SLEEP --- 2020-10-29 Coiby Xu New
[2/5] i2c: mediatek: remove unnecessary CONFIG_PM_SLEEP [1/5] i2c: qup: remove unnecessary CONFIG_PM_SLEEP --- 2020-10-29 Coiby Xu New
[1/5] i2c: qup: remove unnecessary CONFIG_PM_SLEEP [1/5] i2c: qup: remove unnecessary CONFIG_PM_SLEEP --- 2020-10-29 Coiby Xu New
[v8] i2c: imx: support slave mode for imx I2C driver [v8] i2c: imx: support slave mode for imx I2C driver --- 2020-10-26 Biwen Li (OSS) New
[2/2] i2c: imx: remove id_table entry [1/2] i2c: imx: use devm_request_threaded_irq to simplify code --- 2020-10-23 Peng Fan New
[1/2] i2c: imx: use devm_request_threaded_irq to simplify code [1/2] i2c: imx: use devm_request_threaded_irq to simplify code --- 2020-10-23 Peng Fan New
[v1] i2c: tegra: Fix i2c_writesl() to use writel() instead of writesl() [v1] i2c: tegra: Fix i2c_writesl() to use writel() instead of writesl() --- 2020-10-20 Sowjanya Komatineni New
[v1] i2c: aspeed: add KUnit tests for clock parameters [v1] i2c: aspeed: add KUnit tests for clock parameters --- 2020-10-16 Brendan Higgins New
[v7] i2c: imx: support slave mode for imx I2C driver [v7] i2c: imx: support slave mode for imx I2C driver --- 2020-10-16 Biwen Li (OSS) New
[2/2] i2c: designware: slave should do WRITE_REQUESTED before WRITE_RECEIVED [1/2] i2c: designware: call i2c_dw_read_clear_intrbits_slave() once --- 2020-10-16 Michael Wu New
[v2] i2c: i2c-mux-gpio: Enable this driver in ACPI land [v2] i2c: i2c-mux-gpio: Enable this driver in ACPI land --- 2020-10-15 Evan Green New
[6/6] i2c: mux: mlxcpld: Extend supported mux number i2c: mux: mlxcpld: Extend driver functionality and update licenses --- 2020-10-14 Vadim Pasternak New
i2c: designware: fix slave omitted IC_INTR_STOP_DET i2c: designware: fix slave omitted IC_INTR_STOP_DET --- 2020-10-14 Michael Wu New
[v2,13/24] docs: i2c: index.rst: add slave-testunit-backend.rst Untitled series #56330 --- 2020-10-13 Mauro Carvalho Chehab New
[v4] i2c: virtio: add a virtio i2c frontend driver [v4] i2c: virtio: add a virtio i2c frontend driver --- 2020-10-12 Jie Deng New
i2c: i2c-mux-gpio: Enable this driver in ACPI land i2c: i2c-mux-gpio: Enable this driver in ACPI land --- 2020-10-09 Evan Green New
[v2,1/1] i2c: ocores: fix polling mode workaround on FU540-C000 SoC fix i2c polling mode workaround for FU540-C000 SoC --- 2020-10-09 Sagar Shrikant Kadam New
[3/3] soc: qcom: geni: Optimize select fifo/dma mode i2c: i2c-qcom-geni: More properly fix the DMA race --- 2020-10-08 Doug Anderson New
[5/5] i2c: geni: sdm845: dont perform DMA for the oneplus6 Untitled series #65100 --- 2020-10-07 Caleb Connolly New
[3/3] i2c: meson: fixup rate calculation with filter delay i2c: meson: scl rate fixups --- 2020-10-07 Jerome Brunet New
[1/1] i2c: ocores: fix polling mode workaround on FU540-C000 SoC fix i2c polling mode workaround for FU540-C000 SoC --- 2020-10-06 Sagar Shrikant Kadam New
[v2,2/3] i2c: imx: Check for I2SR_IAL after every byte i2c: imx: Fix handling of arbitration loss --- 2020-10-02 Christian Eggers New
[v2,1/3] i2c: imx: Fix reset of I2SR_IAL flag i2c: imx: Fix handling of arbitration loss --- 2020-10-02 Christian Eggers New
[v1] i2c: npcm7xx: Support changing bus speed using debugfs. [v1] i2c: npcm7xx: Support changing bus speed using debugfs. --- 2020-09-30 Tali Perry New
[v9,02/32] i2c: tegra: Add missing pm_runtime_put() Improvements for Tegra I2C driver --- 2020-09-29 Dmitry Osipenko New
[v2] i2c: cpm: Fix i2c_ram structure [v2] i2c: cpm: Fix i2c_ram structure --- 2020-09-23 nico.vince@gmail.com New
i2c: nvidia-gpu: use dev_info for timeout error i2c: nvidia-gpu: use dev_info for timeout error --- 2020-09-21 Ajay Gupta New
[v10,1/2] i2c: i2c-mlxbf: I2C SMBus driver for Mellanox BlueField SoC i2c: add driver for Mellanox BlueField SoC --- 2020-09-21 Khalil Blaiech New
[2/3] i2c: imx: Check for I2SR_IAL after every byte [1/3] i2c: imx: Fix reset of I2SR_IAL flag --- 2020-09-17 Christian Eggers New
[1/3] i2c: imx: Fix reset of I2SR_IAL flag [1/3] i2c: imx: Fix reset of I2SR_IAL flag --- 2020-09-17 Christian Eggers New
[v2,4/4] HID: i2c-hid: Use block reads when possible to save power [v2,1/4] i2c: designware: Fix transfer failures for invalid SMBus block reads --- 2020-09-17 Sultan Alsawaf (unemployed) New
[v2,1/4] i2c: designware: Fix transfer failures for invalid SMBus block reads [v2,1/4] i2c: designware: Fix transfer failures for invalid SMBus block reads --- 2020-09-17 Sultan Alsawaf (unemployed) New
i2c: Use kobj_to_dev() API i2c: Use kobj_to_dev() API --- 2020-09-17 Qing Wang New
[RESEND,v9,2/2] dt-bindings: i2c: I2C binding for Mellanox BlueField SoC Untitled series #50978 --- 2020-09-16 Khalil Blaiech New
misc: eeprom: set type id as EEPROM for nvmem devices misc: eeprom: set type id as EEPROM for nvmem devices --- 2020-09-16 Vadym Kochan New
[V2,3/5] misc: eeprom: at24: Support custom device names for AT24 EEPROMs Add support for custom names for AT24 EEPROMs --- 2020-09-16 Jon Hunter New
i2c: aspeed: disable additional device addresses on ast2[56]xx i2c: aspeed: disable additional device addresses on ast2[56]xx --- 2020-09-15 Zev Weiss New
[1/2] i2c: stm32: fix slot id after introduction of host-notify support [1/2] i2c: stm32: fix slot id after introduction of host-notify support --- 2020-09-15 Alain Volmat New
[v2,2/2] i2c: stm32: Simplify with dev_err_probe() Avoid meaningless DMA error print & use dev_err_probe --- 2020-09-14 Alain Volmat New
i2c: mediatek: Fix generic definitions for bus frequencies i2c: mediatek: Fix generic definitions for bus frequencies --- 2020-09-12 Qii Wang (王琪) New
[1/5] misc: eeprom: at24: Initialise AT24 NVMEM ID field [1/5] misc: eeprom: at24: Initialise AT24 NVMEM ID field --- 2020-09-10 Jon Hunter New
i2c: stm32: do not display error when DMA is not requested i2c: stm32: do not display error when DMA is not requested --- 2020-09-10 Alain Volmat New
[trivial] treewide: Convert switch/case fallthrough; to break; [trivial] treewide: Convert switch/case fallthrough; to break; --- 2020-09-09 Joe Perches New
[v2,1/1] i2c: busses: Add support for atomic transfers in Actions Semi Owl driver [v2,1/1] i2c: busses: Add support for atomic transfers in Actions Semi Owl driver --- 2020-09-08 Cristian Ciocaltea New
[v6,30/35] i2c: tegra: Consolidate error handling in tegra_i2c_xfer_msg() Improvements for Tegra I2C driver --- 2020-09-08 Dmitry Osipenko New
[v6,21/35] i2c: tegra: Don't fall back to PIO mode if DMA configuration fails Improvements for Tegra I2C driver --- 2020-09-08 Dmitry Osipenko New
[v6,14/35] i2c: tegra: Clean up probe function Improvements for Tegra I2C driver --- 2020-09-08 Dmitry Osipenko New
[V3] i2c: i2c-qcom-geni: Add shutdown callback for i2c [V3] i2c: i2c-qcom-geni: Add shutdown callback for i2c --- 2020-09-07 Roja Rani Yarubandi New
[v5,36/36] i2c: tegra: Improve tegra_i2c_dev structure Untitled series #51004 --- 2020-09-06 Dmitry Osipenko New
[v5,33/36] i2c: tegra: Clean up variable types Untitled series #51004 --- 2020-09-06 Dmitry Osipenko New
[v5,31/36] i2c: tegra: Clean up whitespaces, newlines and indentation Untitled series #51004 --- 2020-09-06 Dmitry Osipenko New
[v5,27/36] i2c: tegra: Reorder location of functions in the code Untitled series #51004 --- 2020-09-06 Dmitry Osipenko New
« 1 2 ... 32 33 34 … 36 37 »