diff mbox series

[v4,02/10] dt-bindings: pinctrl: Add RaspberryPi RP1 gpio/pinctrl/pinmux bindings

Message ID 9b83c5ee8345e4fe26e942f343305fdddc01c59f.1732444746.git.andrea.porta@suse.com
State Superseded
Headers show
Series Add support for RaspberryPi RP1 PCI device using a DT overlay | expand

Commit Message

Andrea della Porta Nov. 24, 2024, 10:51 a.m. UTC 
Add device tree bindings for the gpio/pin/mux controller that is part of
the RP1 multi function device, and relative entries in MAINTAINERS file.

Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
---
 .../pinctrl/raspberrypi,rp1-gpio.yaml         | 193 ++++++++++++++++++
 MAINTAINERS                                   |   2 +
 2 files changed, 195 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml

Comments

Stefan Wahren Nov. 25, 2024, 6:12 p.m. UTC | #1 
Hi Andrea,

Am 24.11.24 um 11:51 schrieb Andrea della Porta:
> Add device tree bindings for the gpio/pin/mux controller that is part of
> the RP1 multi function device, and relative entries in MAINTAINERS file.
>
> Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
> ---
>   .../pinctrl/raspberrypi,rp1-gpio.yaml         | 193 ++++++++++++++++++
>   MAINTAINERS                                   |   2 +
>   2 files changed, 195 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml
> new file mode 100644
> index 000000000000..21923d39c1bc
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml
> @@ -0,0 +1,193 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/raspberrypi,rp1-gpio.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: RaspberryPi RP1 GPIO/Pinconf/Pinmux Controller submodule
> +
> +maintainers:
> +  - Andrea della Porta <andrea.porta@suse.com>
> +
> +description:
> +  The RP1 chipset is a Multi Function Device containing, among other
> +  sub-peripherals, a gpio/pinconf/mux controller whose 54 pins are grouped
> +  into 3 banks.
> +  It works also as an interrupt controller for those gpios.
> +
> +properties:
> +  compatible:
> +    const: raspberrypi,rp1-gpio
> +
> +  reg:
> +    maxItems: 3
> +    description: One reg specifier for each one of the 3 pin banks.
> +
> +  '#gpio-cells':
> +    description: The first cell is the pin number and the second cell is used
> +      to specify the flags (see include/dt-bindings/gpio/gpio.h).
> +    const: 2
> +
> +  gpio-controller: true
> +
> +  gpio-ranges:
> +    maxItems: 1
> +
> +  gpio-line-names:
> +    maxItems: 54
> +
> +  interrupts:
> +    maxItems: 3
> +    description: One interrupt specifier for each one of the 3 pin banks.
> +
> +  '#interrupt-cells':
> +    description:
> +      Specifies the Bank number [0, 1, 2] and Flags as defined in
> +      include/dt-bindings/interrupt-controller/irq.h.
> +    const: 2
> +
> +  interrupt-controller: true
> +
> +patternProperties:
> +  "-state$":
> +    oneOf:
> +      - $ref: "#/$defs/raspberrypi-rp1-state"
> +      - patternProperties:
> +          "-pins$":
> +            $ref: "#/$defs/raspberrypi-rp1-state"
> +        additionalProperties: false
> +
> +$defs:
> +  raspberrypi-rp1-state:
> +    allOf:
> +      - $ref: pincfg-node.yaml#
> +      - $ref: pinmux-node.yaml#
> +
> +    description:
> +      Pin controller client devices use pin configuration subnodes (children
> +      and grandchildren) for desired pin configuration.
> +      Client device subnodes use below standard properties.
> +
> +    properties:
> +      pins:
> +        description:
> +          List of gpio pins affected by the properties specified in this
> +          subnode.
> +        items:
> +          pattern: "^gpio([0-9]|[1-5][0-9])$"
> +
> +      function:
> +        enum: [ alt0, alt1, alt2, alt3, alt4, gpio, alt6, alt7, alt8, none,
> +                aaud, dcd0, dpi, dsi0_te_ext, dsi1_te_ext, dsr0, dtr0, gpclk0,
> +                gpclk1, gpclk2, gpclk3, gpclk4, gpclk5, i2c0, i2c1, i2c2, i2c3,
> +                i2c4, i2c5, i2c6, i2s0, i2s1, i2s2, ir, mic, pcie_clkreq_n,
> +                pio, proc_rio, pwm0, pwm1, ri0, sd0, sd1, spi0, spi1, spi2,
> +                spi3, spi4, spi5, spi6, spi7, spi8, uart0, uart1, uart2, uart3,
> +                uart4, uart5, vbus0, vbus1, vbus2, vbus3 ]
> +
> +        description:
> +          Specify the alternative function to be configured for the specified
> +          pins.
> +
> +      bias-disable: true
> +      bias-pull-down: true
> +      bias-pull-up: true
> +      slew-rate:
> +        description: 0 is slow slew rate, 1 is fast slew rate
> +        enum: [ 0, 1 ]
> +      drive-strength:
> +        enum: [ 2, 4, 8, 12 ]
according to the driver in patch 4 the following should also be
supported by the hardware:

input-enable, input-schmitt-enable, output-enable, output-low, output-high
> +
> +    additionalProperties: false
> +
> +allOf:
> +  - $ref: pinctrl.yaml#
> +
> +required:
> +  - reg
> +  - compatible
> +  - '#gpio-cells'
> +  - gpio-controller
> +  - interrupts
> +  - '#interrupt-cells'
> +  - interrupt-controller
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    rp1 {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        rp1_gpio: pinctrl@c0400d0000 {
> +            reg = <0xc0 0x400d0000  0x0 0xc000>,
> +                  <0xc0 0x400e0000  0x0 0xc000>,
> +                  <0xc0 0x400f0000  0x0 0xc000>;
> +            compatible = "raspberrypi,rp1-gpio";
> +            gpio-controller;
> +            #gpio-cells = <2>;
> +            interrupt-controller;
> +            #interrupt-cells = <2>;
> +            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>,
> +                         <1 IRQ_TYPE_LEVEL_HIGH>,
> +                         <2 IRQ_TYPE_LEVEL_HIGH>;
> +            gpio-line-names =
> +                   "ID_SDA", // GPIO0
> +                   "ID_SCL", // GPIO1
> +                   "GPIO2", "GPIO3", "GPIO4", "GPIO5", "GPIO6",
> +                   "GPIO7", "GPIO8", "GPIO9", "GPIO10", "GPIO11",
> +                   "GPIO12", "GPIO13", "GPIO14", "GPIO15", "GPIO16",
> +                   "GPIO17", "GPIO18", "GPIO19", "GPIO20", "GPIO21",
> +                   "GPIO22", "GPIO23", "GPIO24", "GPIO25", "GPIO26",
> +                   "GPIO27",
> +                   "PCIE_RP1_WAKE", // GPIO28
> +                   "FAN_TACH", // GPIO29
> +                   "HOST_SDA", // GPIO30
> +                   "HOST_SCL", // GPIO31
> +                   "ETH_RST_N", // GPIO32
> +                   "", // GPIO33
> +                   "CD0_IO0_MICCLK", // GPIO34
> +                   "CD0_IO0_MICDAT0", // GPIO35
> +                   "RP1_PCIE_CLKREQ_N", // GPIO36
> +                   "", // GPIO37
> +                   "CD0_SDA", // GPIO38
> +                   "CD0_SCL", // GPIO39
> +                   "CD1_SDA", // GPIO40
> +                   "CD1_SCL", // GPIO41
> +                   "USB_VBUS_EN", // GPIO42
> +                   "USB_OC_N", // GPIO43
> +                   "RP1_STAT_LED", // GPIO44
> +                   "FAN_PWM", // GPIO45
> +                   "CD1_IO0_MICCLK", // GPIO46
> +                   "2712_WAKE", // GPIO47
> +                   "CD1_IO1_MICDAT1", // GPIO48
> +                   "EN_MAX_USB_CUR", // GPIO49
> +                   "", // GPIO50
> +                   "", // GPIO51
> +                   "", // GPIO52
> +                   ""; // GPIO53
> +
> +            rp1-i2s0-default-state {
> +                function = "i2s0";
> +                pins = "gpio18", "gpio19", "gpio20", "gpio21";
> +                bias-disable;
> +            };
> +
> +            rp1-uart0-default-state {
> +                txd-pins {
> +                    function = "uart0";
> +                    pins = "gpio14";
> +                    bias-disable;
> +                };
> +
> +                rxd-pins {
> +                    function = "uart0";
> +                    pins = "gpio15";
> +                    bias-pull-up;
> +                };
> +            };
> +        };
> +    };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 75a66e3e34c9..c55d12550246 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -19384,7 +19384,9 @@ RASPBERRY PI RP1 PCI DRIVER
>   M:	Andrea della Porta <andrea.porta@suse.com>
>   S:	Maintained
>   F:	Documentation/devicetree/bindings/clock/raspberrypi,rp1-clocks.yaml
> +F:	Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml
>   F:	include/dt-bindings/clock/rp1.h
> +F:	include/dt-bindings/misc/rp1.h
>
>   RC-CORE / LIRC FRAMEWORK
>   M:	Sean Young <sean@mess.org>
Krzysztof Kozlowski Nov. 27, 2024, 7:55 a.m. UTC | #2 
On Sun, Nov 24, 2024 at 11:51:39AM +0100, Andrea della Porta wrote:
> +  '#interrupt-cells':
> +    description:
> +      Specifies the Bank number [0, 1, 2] and Flags as defined in
> +      include/dt-bindings/interrupt-controller/irq.h.
> +    const: 2
> +
> +  interrupt-controller: true
> +
> +patternProperties:
> +  "-state$":
> +    oneOf:
> +      - $ref: "#/$defs/raspberrypi-rp1-state"
> +      - patternProperties:
> +          "-pins$":
> +            $ref: "#/$defs/raspberrypi-rp1-state"
> +        additionalProperties: false
> +
> +$defs:
> +  raspberrypi-rp1-state:
> +    allOf:
> +      - $ref: pincfg-node.yaml#
> +      - $ref: pinmux-node.yaml#
> +
> +    description:
> +      Pin controller client devices use pin configuration subnodes (children
> +      and grandchildren) for desired pin configuration.
> +      Client device subnodes use below standard properties.
> +
> +    properties:
> +      pins:
> +        description:
> +          List of gpio pins affected by the properties specified in this
> +          subnode.
> +        items:
> +          pattern: "^gpio([0-9]|[1-5][0-9])$"

You have 54 GPIOs, so up to 53.

Use also consistent quotes, either ' or ".

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
Andrea della Porta Nov. 29, 2024, 5:11 p.m. UTC | #3 
Hi Krzysztof,

On 08:55 Wed 27 Nov     , Krzysztof Kozlowski wrote:
> On Sun, Nov 24, 2024 at 11:51:39AM +0100, Andrea della Porta wrote:
> > +  '#interrupt-cells':
> > +    description:
> > +      Specifies the Bank number [0, 1, 2] and Flags as defined in
> > +      include/dt-bindings/interrupt-controller/irq.h.
> > +    const: 2
> > +
> > +  interrupt-controller: true
> > +
> > +patternProperties:
> > +  "-state$":
> > +    oneOf:
> > +      - $ref: "#/$defs/raspberrypi-rp1-state"
> > +      - patternProperties:
> > +          "-pins$":
> > +            $ref: "#/$defs/raspberrypi-rp1-state"
> > +        additionalProperties: false
> > +
> > +$defs:
> > +  raspberrypi-rp1-state:
> > +    allOf:
> > +      - $ref: pincfg-node.yaml#
> > +      - $ref: pinmux-node.yaml#
> > +
> > +    description:
> > +      Pin controller client devices use pin configuration subnodes (children
> > +      and grandchildren) for desired pin configuration.
> > +      Client device subnodes use below standard properties.
> > +
> > +    properties:
> > +      pins:
> > +        description:
> > +          List of gpio pins affected by the properties specified in this
> > +          subnode.
> > +        items:
> > +          pattern: "^gpio([0-9]|[1-5][0-9])$"
> 
> You have 54 GPIOs, so up to 53.

Ack.

> 
> Use also consistent quotes, either ' or ".

Ack.

> 
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Many thanks,
Andrea

> 
> Best regards,
> Krzysztof
>
Andrea della Porta Nov. 29, 2024, 5:51 p.m. UTC | #4 
Hi Stephan,

On 19:12 Mon 25 Nov     , Stefan Wahren wrote:
> Hi Andrea,
> 
> Am 24.11.24 um 11:51 schrieb Andrea della Porta:
> > Add device tree bindings for the gpio/pin/mux controller that is part of
> > the RP1 multi function device, and relative entries in MAINTAINERS file.
> > 
> > Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
> > ---
> >   .../pinctrl/raspberrypi,rp1-gpio.yaml         | 193 ++++++++++++++++++
> >   MAINTAINERS                                   |   2 +
> >   2 files changed, 195 insertions(+)
> >   create mode 100644 Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml
> > new file mode 100644
> > index 000000000000..21923d39c1bc
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml
> > @@ -0,0 +1,193 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/pinctrl/raspberrypi,rp1-gpio.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: RaspberryPi RP1 GPIO/Pinconf/Pinmux Controller submodule
> > +
> > +maintainers:
> > +  - Andrea della Porta <andrea.porta@suse.com>
> > +
> > +description:
> > +  The RP1 chipset is a Multi Function Device containing, among other
> > +  sub-peripherals, a gpio/pinconf/mux controller whose 54 pins are grouped
> > +  into 3 banks.
> > +  It works also as an interrupt controller for those gpios.
> > +
> > +properties:
> > +  compatible:
> > +    const: raspberrypi,rp1-gpio
> > +
> > +  reg:
> > +    maxItems: 3
> > +    description: One reg specifier for each one of the 3 pin banks.
> > +
> > +  '#gpio-cells':
> > +    description: The first cell is the pin number and the second cell is used
> > +      to specify the flags (see include/dt-bindings/gpio/gpio.h).
> > +    const: 2
> > +
> > +  gpio-controller: true
> > +
> > +  gpio-ranges:
> > +    maxItems: 1
> > +
> > +  gpio-line-names:
> > +    maxItems: 54
> > +
> > +  interrupts:
> > +    maxItems: 3
> > +    description: One interrupt specifier for each one of the 3 pin banks.
> > +
> > +  '#interrupt-cells':
> > +    description:
> > +      Specifies the Bank number [0, 1, 2] and Flags as defined in
> > +      include/dt-bindings/interrupt-controller/irq.h.
> > +    const: 2
> > +
> > +  interrupt-controller: true
> > +
> > +patternProperties:
> > +  "-state$":
> > +    oneOf:
> > +      - $ref: "#/$defs/raspberrypi-rp1-state"
> > +      - patternProperties:
> > +          "-pins$":
> > +            $ref: "#/$defs/raspberrypi-rp1-state"
> > +        additionalProperties: false
> > +
> > +$defs:
> > +  raspberrypi-rp1-state:
> > +    allOf:
> > +      - $ref: pincfg-node.yaml#
> > +      - $ref: pinmux-node.yaml#
> > +
> > +    description:
> > +      Pin controller client devices use pin configuration subnodes (children
> > +      and grandchildren) for desired pin configuration.
> > +      Client device subnodes use below standard properties.
> > +
> > +    properties:
> > +      pins:
> > +        description:
> > +          List of gpio pins affected by the properties specified in this
> > +          subnode.
> > +        items:
> > +          pattern: "^gpio([0-9]|[1-5][0-9])$"
> > +
> > +      function:
> > +        enum: [ alt0, alt1, alt2, alt3, alt4, gpio, alt6, alt7, alt8, none,
> > +                aaud, dcd0, dpi, dsi0_te_ext, dsi1_te_ext, dsr0, dtr0, gpclk0,
> > +                gpclk1, gpclk2, gpclk3, gpclk4, gpclk5, i2c0, i2c1, i2c2, i2c3,
> > +                i2c4, i2c5, i2c6, i2s0, i2s1, i2s2, ir, mic, pcie_clkreq_n,
> > +                pio, proc_rio, pwm0, pwm1, ri0, sd0, sd1, spi0, spi1, spi2,
> > +                spi3, spi4, spi5, spi6, spi7, spi8, uart0, uart1, uart2, uart3,
> > +                uart4, uart5, vbus0, vbus1, vbus2, vbus3 ]
> > +
> > +        description:
> > +          Specify the alternative function to be configured for the specified
> > +          pins.
> > +
> > +      bias-disable: true
> > +      bias-pull-down: true
> > +      bias-pull-up: true
> > +      slew-rate:
> > +        description: 0 is slow slew rate, 1 is fast slew rate
> > +        enum: [ 0, 1 ]
> > +      drive-strength:
> > +        enum: [ 2, 4, 8, 12 ]
> according to the driver in patch 4 the following should also be
> supported by the hardware:
> 
> input-enable, input-schmitt-enable, output-enable, output-low, output-high

You are right, added.

Many thanks,
Andrea

> > +
> > +    additionalProperties: false
> > +
> > +allOf:
> > +  - $ref: pinctrl.yaml#
> > +
> > +required:
> > +  - reg
> > +  - compatible
> > +  - '#gpio-cells'
> > +  - gpio-controller
> > +  - interrupts
> > +  - '#interrupt-cells'
> > +  - interrupt-controller
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/irq.h>
> > +
> > +    rp1 {
> > +        #address-cells = <2>;
> > +        #size-cells = <2>;
> > +
> > +        rp1_gpio: pinctrl@c0400d0000 {
> > +            reg = <0xc0 0x400d0000  0x0 0xc000>,
> > +                  <0xc0 0x400e0000  0x0 0xc000>,
> > +                  <0xc0 0x400f0000  0x0 0xc000>;
> > +            compatible = "raspberrypi,rp1-gpio";
> > +            gpio-controller;
> > +            #gpio-cells = <2>;
> > +            interrupt-controller;
> > +            #interrupt-cells = <2>;
> > +            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <1 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <2 IRQ_TYPE_LEVEL_HIGH>;
> > +            gpio-line-names =
> > +                   "ID_SDA", // GPIO0
> > +                   "ID_SCL", // GPIO1
> > +                   "GPIO2", "GPIO3", "GPIO4", "GPIO5", "GPIO6",
> > +                   "GPIO7", "GPIO8", "GPIO9", "GPIO10", "GPIO11",
> > +                   "GPIO12", "GPIO13", "GPIO14", "GPIO15", "GPIO16",
> > +                   "GPIO17", "GPIO18", "GPIO19", "GPIO20", "GPIO21",
> > +                   "GPIO22", "GPIO23", "GPIO24", "GPIO25", "GPIO26",
> > +                   "GPIO27",
> > +                   "PCIE_RP1_WAKE", // GPIO28
> > +                   "FAN_TACH", // GPIO29
> > +                   "HOST_SDA", // GPIO30
> > +                   "HOST_SCL", // GPIO31
> > +                   "ETH_RST_N", // GPIO32
> > +                   "", // GPIO33
> > +                   "CD0_IO0_MICCLK", // GPIO34
> > +                   "CD0_IO0_MICDAT0", // GPIO35
> > +                   "RP1_PCIE_CLKREQ_N", // GPIO36
> > +                   "", // GPIO37
> > +                   "CD0_SDA", // GPIO38
> > +                   "CD0_SCL", // GPIO39
> > +                   "CD1_SDA", // GPIO40
> > +                   "CD1_SCL", // GPIO41
> > +                   "USB_VBUS_EN", // GPIO42
> > +                   "USB_OC_N", // GPIO43
> > +                   "RP1_STAT_LED", // GPIO44
> > +                   "FAN_PWM", // GPIO45
> > +                   "CD1_IO0_MICCLK", // GPIO46
> > +                   "2712_WAKE", // GPIO47
> > +                   "CD1_IO1_MICDAT1", // GPIO48
> > +                   "EN_MAX_USB_CUR", // GPIO49
> > +                   "", // GPIO50
> > +                   "", // GPIO51
> > +                   "", // GPIO52
> > +                   ""; // GPIO53
> > +
> > +            rp1-i2s0-default-state {
> > +                function = "i2s0";
> > +                pins = "gpio18", "gpio19", "gpio20", "gpio21";
> > +                bias-disable;
> > +            };
> > +
> > +            rp1-uart0-default-state {
> > +                txd-pins {
> > +                    function = "uart0";
> > +                    pins = "gpio14";
> > +                    bias-disable;
> > +                };
> > +
> > +                rxd-pins {
> > +                    function = "uart0";
> > +                    pins = "gpio15";
> > +                    bias-pull-up;
> > +                };
> > +            };
> > +        };
> > +    };
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index 75a66e3e34c9..c55d12550246 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -19384,7 +19384,9 @@ RASPBERRY PI RP1 PCI DRIVER
> >   M:	Andrea della Porta <andrea.porta@suse.com>
> >   S:	Maintained
> >   F:	Documentation/devicetree/bindings/clock/raspberrypi,rp1-clocks.yaml
> > +F:	Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml
> >   F:	include/dt-bindings/clock/rp1.h
> > +F:	include/dt-bindings/misc/rp1.h
> > 
> >   RC-CORE / LIRC FRAMEWORK
> >   M:	Sean Young <sean@mess.org>
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml
new file mode 100644
index 000000000000..21923d39c1bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml
@@ -0,0 +1,193 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/raspberrypi,rp1-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RaspberryPi RP1 GPIO/Pinconf/Pinmux Controller submodule
+
+maintainers:
+  - Andrea della Porta <andrea.porta@suse.com>
+
+description:
+  The RP1 chipset is a Multi Function Device containing, among other
+  sub-peripherals, a gpio/pinconf/mux controller whose 54 pins are grouped
+  into 3 banks.
+  It works also as an interrupt controller for those gpios.
+
+properties:
+  compatible:
+    const: raspberrypi,rp1-gpio
+
+  reg:
+    maxItems: 3
+    description: One reg specifier for each one of the 3 pin banks.
+
+  '#gpio-cells':
+    description: The first cell is the pin number and the second cell is used
+      to specify the flags (see include/dt-bindings/gpio/gpio.h).
+    const: 2
+
+  gpio-controller: true
+
+  gpio-ranges:
+    maxItems: 1
+
+  gpio-line-names:
+    maxItems: 54
+
+  interrupts:
+    maxItems: 3
+    description: One interrupt specifier for each one of the 3 pin banks.
+
+  '#interrupt-cells':
+    description:
+      Specifies the Bank number [0, 1, 2] and Flags as defined in
+      include/dt-bindings/interrupt-controller/irq.h.
+    const: 2
+
+  interrupt-controller: true
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/raspberrypi-rp1-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/raspberrypi-rp1-state"
+        additionalProperties: false
+
+$defs:
+  raspberrypi-rp1-state:
+    allOf:
+      - $ref: pincfg-node.yaml#
+      - $ref: pinmux-node.yaml#
+
+    description:
+      Pin controller client devices use pin configuration subnodes (children
+      and grandchildren) for desired pin configuration.
+      Client device subnodes use below standard properties.
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          pattern: "^gpio([0-9]|[1-5][0-9])$"
+
+      function:
+        enum: [ alt0, alt1, alt2, alt3, alt4, gpio, alt6, alt7, alt8, none,
+                aaud, dcd0, dpi, dsi0_te_ext, dsi1_te_ext, dsr0, dtr0, gpclk0,
+                gpclk1, gpclk2, gpclk3, gpclk4, gpclk5, i2c0, i2c1, i2c2, i2c3,
+                i2c4, i2c5, i2c6, i2s0, i2s1, i2s2, ir, mic, pcie_clkreq_n,
+                pio, proc_rio, pwm0, pwm1, ri0, sd0, sd1, spi0, spi1, spi2,
+                spi3, spi4, spi5, spi6, spi7, spi8, uart0, uart1, uart2, uart3,
+                uart4, uart5, vbus0, vbus1, vbus2, vbus3 ]
+
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+      bias-disable: true
+      bias-pull-down: true
+      bias-pull-up: true
+      slew-rate:
+        description: 0 is slow slew rate, 1 is fast slew rate
+        enum: [ 0, 1 ]
+      drive-strength:
+        enum: [ 2, 4, 8, 12 ]
+
+    additionalProperties: false
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - reg
+  - compatible
+  - '#gpio-cells'
+  - gpio-controller
+  - interrupts
+  - '#interrupt-cells'
+  - interrupt-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    rp1 {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        rp1_gpio: pinctrl@c0400d0000 {
+            reg = <0xc0 0x400d0000  0x0 0xc000>,
+                  <0xc0 0x400e0000  0x0 0xc000>,
+                  <0xc0 0x400f0000  0x0 0xc000>;
+            compatible = "raspberrypi,rp1-gpio";
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>,
+                         <1 IRQ_TYPE_LEVEL_HIGH>,
+                         <2 IRQ_TYPE_LEVEL_HIGH>;
+            gpio-line-names =
+                   "ID_SDA", // GPIO0
+                   "ID_SCL", // GPIO1
+                   "GPIO2", "GPIO3", "GPIO4", "GPIO5", "GPIO6",
+                   "GPIO7", "GPIO8", "GPIO9", "GPIO10", "GPIO11",
+                   "GPIO12", "GPIO13", "GPIO14", "GPIO15", "GPIO16",
+                   "GPIO17", "GPIO18", "GPIO19", "GPIO20", "GPIO21",
+                   "GPIO22", "GPIO23", "GPIO24", "GPIO25", "GPIO26",
+                   "GPIO27",
+                   "PCIE_RP1_WAKE", // GPIO28
+                   "FAN_TACH", // GPIO29
+                   "HOST_SDA", // GPIO30
+                   "HOST_SCL", // GPIO31
+                   "ETH_RST_N", // GPIO32
+                   "", // GPIO33
+                   "CD0_IO0_MICCLK", // GPIO34
+                   "CD0_IO0_MICDAT0", // GPIO35
+                   "RP1_PCIE_CLKREQ_N", // GPIO36
+                   "", // GPIO37
+                   "CD0_SDA", // GPIO38
+                   "CD0_SCL", // GPIO39
+                   "CD1_SDA", // GPIO40
+                   "CD1_SCL", // GPIO41
+                   "USB_VBUS_EN", // GPIO42
+                   "USB_OC_N", // GPIO43
+                   "RP1_STAT_LED", // GPIO44
+                   "FAN_PWM", // GPIO45
+                   "CD1_IO0_MICCLK", // GPIO46
+                   "2712_WAKE", // GPIO47
+                   "CD1_IO1_MICDAT1", // GPIO48
+                   "EN_MAX_USB_CUR", // GPIO49
+                   "", // GPIO50
+                   "", // GPIO51
+                   "", // GPIO52
+                   ""; // GPIO53
+
+            rp1-i2s0-default-state {
+                function = "i2s0";
+                pins = "gpio18", "gpio19", "gpio20", "gpio21";
+                bias-disable;
+            };
+
+            rp1-uart0-default-state {
+                txd-pins {
+                    function = "uart0";
+                    pins = "gpio14";
+                    bias-disable;
+                };
+
+                rxd-pins {
+                    function = "uart0";
+                    pins = "gpio15";
+                    bias-pull-up;
+                };
+            };
+        };
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index 75a66e3e34c9..c55d12550246 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -19384,7 +19384,9 @@  RASPBERRY PI RP1 PCI DRIVER
 M:	Andrea della Porta <andrea.porta@suse.com>
 S:	Maintained
 F:	Documentation/devicetree/bindings/clock/raspberrypi,rp1-clocks.yaml
+F:	Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml
 F:	include/dt-bindings/clock/rp1.h
+F:	include/dt-bindings/misc/rp1.h
 
 RC-CORE / LIRC FRAMEWORK
 M:	Sean Young <sean@mess.org>