diff mbox series

[v3,1/9] gpio: regmap: Always set gpio_chip get_direction

Message ID 4a7661f01803c100a9322dc15c8df17d61c2ed72.1669100542.git.william.gray@linaro.org
State Superseded
Headers show
Series Migrate i8255 GPIO drivers to regmap API | expand

Commit Message

William Breathitt Gray Nov. 22, 2022, 7:10 a.m. UTC 
If you only have reg_dat_base set, then it is input-only; if you only
have reg_set_base set, then it is output-only. Thus, we can always set
gpio_chip get_direction to gpio_regmap_get_direction and return
GPIO_LINE_DIRECTION_IN/GPIO_LINE_DIRECTION_OUT given the respective
register base addresses configuration.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Michael Walle <michael@walle.cc>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
---
 drivers/gpio/gpio-regmap.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/gpio/gpio-regmap.c b/drivers/gpio/gpio-regmap.c
index 6383136cbe59..f907c9c19fce 100644
--- a/drivers/gpio/gpio-regmap.c
+++ b/drivers/gpio/gpio-regmap.c
@@ -111,6 +111,11 @@  static int gpio_regmap_get_direction(struct gpio_chip *chip,
 	unsigned int base, val, reg, mask;
 	int invert, ret;
 
+	if (gpio->reg_dat_base && !gpio->reg_set_base)
+		return GPIO_LINE_DIRECTION_IN;
+	if (gpio->reg_set_base && !gpio->reg_dat_base)
+		return GPIO_LINE_DIRECTION_OUT;
+
 	if (gpio->reg_dir_out_base) {
 		base = gpio_regmap_addr(gpio->reg_dir_out_base);
 		invert = 0;
@@ -265,8 +270,8 @@  struct gpio_regmap *gpio_regmap_register(const struct gpio_regmap_config *config
 	else if (gpio->reg_set_base)
 		chip->set = gpio_regmap_set;
 
+	chip->get_direction = gpio_regmap_get_direction;
 	if (gpio->reg_dir_in_base || gpio->reg_dir_out_base) {
-		chip->get_direction = gpio_regmap_get_direction;
 		chip->direction_input = gpio_regmap_direction_input;
 		chip->direction_output = gpio_regmap_direction_output;
 	}