diff mbox series

[06/15] dt_bindings: regulator: Add ROHM BD71815 PMIC regulators

Message ID 3ca03c3b76d6898c46ee645ddb5fa25cbfc62367.1610110144.git.matti.vaittinen@fi.rohmeurope.com
State Superseded
Headers show
Series Support ROHM BD71815 PMIC | expand

Commit Message

Vaittinen, Matti Jan. 8, 2021, 1:36 p.m. UTC
Add binding documentation for regulators on ROHM BD71815 PMIC.
5 bucks, 7 LDOs and a boost for LED.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
---
 .../regulator/rohm,bd71815-regulator.yaml     | 104 ++++++++++++++++++
 1 file changed, 104 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml

Comments

Rob Herring (Arm) Jan. 11, 2021, 7:09 p.m. UTC | #1
On Fri, Jan 08, 2021 at 03:36:38PM +0200, Matti Vaittinen wrote:
> Add binding documentation for regulators on ROHM BD71815 PMIC.
> 5 bucks, 7 LDOs and a boost for LED.
> 
> Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
> ---
>  .../regulator/rohm,bd71815-regulator.yaml     | 104 ++++++++++++++++++
>  1 file changed, 104 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml
> 
> diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml
> new file mode 100644
> index 000000000000..2aa21603698c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml
> @@ -0,0 +1,104 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/regulator/rohm,bd71815-regulator.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: ROHM BD71815 Power Management Integrated Circuit regulators
> +
> +maintainers:
> +  - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
> +
> +description: |
> +  This module is part of the ROHM BD718215 MFD device. For more details
> +  see Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml.
> +
> +  The regulator controller is represented as a sub-node of the PMIC node
> +  on the device tree.
> +
> +  The valid names for BD71815 regulator nodes are
> +  buck1, buck2, buck3, buck4, buck5,
> +  ldo1, ldo2, ldo3, ldo4, ldo5,
> +  ldodvref, ldolpsr, wled

No schema for the last 3?

> +
> +patternProperties:
> +  "^(ldo|buck)[1-5]$":
> +    type: object
> +    description:
> +      Properties for single LDO/BUCK regulator.
> +    $ref: regulator.yaml#
> +
> +    properties:
> +      regulator-name:
> +        pattern: "^(ldo|buck)[1-5]$"
> +        description:
> +          should be "ldo1", ..., "ldo5" and "buck1", ..., "buck5"
> +
> +      rohm,vsel-gpios:
> +        description:
> +          GPIO used to control ldo4 state (when ldo4 is controlled by GPIO).
> +
> +      rohm,dvs-run-voltage:

These should have a unit suffix.

> +        description:
> +          PMIC "RUN" state voltage in uV when PMIC HW states are used. See
> +          comments below for bucks/LDOs which support this. 0 means
> +          regulator should be disabled at RUN state.
> +        $ref: "/schemas/types.yaml#/definitions/uint32"
> +        minimum: 0
> +        maximum: 3300000
> +
> +      rohm,dvs-snvs-voltage:
> +        description:
> +          Whether to keep regulator enabled at "SNVS" state or not.
> +          0 means regulator should be disabled at SNVS state, non zero voltage
> +          keeps regulator enabled. BD71815 does not change voltage level
> +          when PMIC transitions to SNVS.SNVS voltage depends on the previous
> +          state (from which the PMIC transitioned to SNVS).
> +        $ref: "/schemas/types.yaml#/definitions/uint32"
> +        minimum: 0
> +        maximum: 3300000
> +
> +      rohm,dvs-suspend-voltage:
> +        description:
> +          PMIC "SUSPEND" state voltage in uV when PMIC HW states are used. See
> +          comments below for bucks/LDOs which support this. 0 means
> +          regulator should be disabled at SUSPEND state.
> +        $ref: "/schemas/types.yaml#/definitions/uint32"
> +        minimum: 0
> +        maximum: 3300000
> +
> +      rohm,dvs-lpsr-voltage:
> +        description:
> +          PMIC "LPSR" state voltage in uV when PMIC HW states are used. See
> +          comments below for bucks/LDOs which support this. 0 means
> +          regulator should be disabled at LPSR state.
> +        $ref: "/schemas/types.yaml#/definitions/uint32"
> +        minimum: 0
> +        maximum: 3300000
> +
> +        # Bucks 1 and 2 support giving separate voltages for operational states
> +        # (RUN /CLEAN according to data-sheet) and non operational states
> +        # (LPSR/SUSPEND). The voltage is automatically changed when HW
> +        # state changes. Omitting these properties from bucks 1 and 2 leave
> +        # buck voltages to not be toggled by HW state. Enable status may still
> +        # be toggled by state changes depending on HW default settings.
> +        #
> +        # Bucks 3-5 and ldos 1-5 support setting the RUN state voltage here.
> +        # Given RUN voltage is used at all states if regulator is enabled at
> +        # given state.
> +        # Values given for other states are regarded as enable/disable at
> +        # given state (see below).
> +        #
> +        # All regulators except WLED support specifying enable/disable status
> +        # for each of the HW states (RUN/SNVS/SUSPEND/LPSR). HW defaults can
> +        # be overridden by setting voltage to 0 (regulator disabled at given
> +        # state) or non-zero (regulator enabled at given state). Please note
> +        # that setting non zero voltages for bucks 1/2 will also enable voltage
> +        # changes according to state change.
> +
> +    required:
> +      - regulator-name
> +
> +    unevaluatedProperties: false
> +
> +additionalProperties: false
> -- 
> 2.25.4
> 
> 
> -- 
> Matti Vaittinen, Linux device drivers
> ROHM Semiconductors, Finland SWDC
> Kiviharjunlenkki 1E
> 90220 OULU
> FINLAND
> 
> ~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
> Simon says - in Latin please.
> ~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
> Thanks to Simon Glass for the translation =]
Vaittinen, Matti Jan. 12, 2021, 6:10 a.m. UTC | #2
On Mon, 2021-01-11 at 13:09 -0600, Rob Herring wrote:
> On Fri, Jan 08, 2021 at 03:36:38PM +0200, Matti Vaittinen wrote:
> > Add binding documentation for regulators on ROHM BD71815 PMIC.
> > 5 bucks, 7 LDOs and a boost for LED.
> > 
> > Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
> > ---
> >  .../regulator/rohm,bd71815-regulator.yaml     | 104
> > ++++++++++++++++++
> >  1 file changed, 104 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/regulator/rohm,bd71815-
> > regulator.yaml
> > 
> > diff --git
> > a/Documentation/devicetree/bindings/regulator/rohm,bd71815-
> > regulator.yaml
> > b/Documentation/devicetree/bindings/regulator/rohm,bd71815-
> > regulator.yaml
> > new file mode 100644
> > index 000000000000..2aa21603698c
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/regulator/rohm,bd71815-
> > regulator.yaml
> > @@ -0,0 +1,104 @@
> > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> > +%YAML 1.2
> > +---
> > +$id: 
> > http://devicetree.org/schemas/regulator/rohm,bd71815-regulator.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: ROHM BD71815 Power Management Integrated Circuit regulators
> > +
> > +maintainers:
> > +  - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
> > +
> > +description: |
> > +  This module is part of the ROHM BD718215 MFD device. For more
> > details
> > +  see Documentation/devicetree/bindings/mfd/rohm,bd71815-
> > pmic.yaml.
> > +
> > +  The regulator controller is represented as a sub-node of the
> > PMIC node
> > +  on the device tree.
> > +
> > +  The valid names for BD71815 regulator nodes are
> > +  buck1, buck2, buck3, buck4, buck5,
> > +  ldo1, ldo2, ldo3, ldo4, ldo5,
> > +  ldodvref, ldolpsr, wled
> 
> No schema for the last 3?

Thanks Rob. I'm unsure what I have been thinking of :( I'll fix this
for next version.

> 
> > +
> > +patternProperties:
> > +  "^(ldo|buck)[1-5]$":
> > +    type: object
> > +    description:
> > +      Properties for single LDO/BUCK regulator.
> > +    $ref: regulator.yaml#
> > +
> > +    properties:
> > +      regulator-name:
> > +        pattern: "^(ldo|buck)[1-5]$"
> > +        description:
> > +          should be "ldo1", ..., "ldo5" and "buck1", ..., "buck5"
> > +
> > +      rohm,vsel-gpios:
> > +        description:
> > +          GPIO used to control ldo4 state (when ldo4 is controlled
> > by GPIO).
> > +
> > +      rohm,dvs-run-voltage:
> 
> These should have a unit suffix.

I know but these are existing properties. I'd like to re-use them as
they have exported parser helpers - and I am unsure what kind of
breakages changing them would cause. (The BD71837/BD71847 which
introduced these properties are one of the PMICs which are pretty
widely used.)

Best Regards
	Matti Vaittinen
Rob Herring (Arm) Jan. 13, 2021, 1:53 p.m. UTC | #3
On Tue, Jan 12, 2021 at 08:10:14AM +0200, Matti Vaittinen wrote:
> 
> On Mon, 2021-01-11 at 13:09 -0600, Rob Herring wrote:
> > On Fri, Jan 08, 2021 at 03:36:38PM +0200, Matti Vaittinen wrote:
> > > Add binding documentation for regulators on ROHM BD71815 PMIC.
> > > 5 bucks, 7 LDOs and a boost for LED.
> > > 
> > > Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
> > > ---
> > >  .../regulator/rohm,bd71815-regulator.yaml     | 104
> > > ++++++++++++++++++
> > >  1 file changed, 104 insertions(+)
> > >  create mode 100644
> > > Documentation/devicetree/bindings/regulator/rohm,bd71815-
> > > regulator.yaml
> > > 
> > > diff --git
> > > a/Documentation/devicetree/bindings/regulator/rohm,bd71815-
> > > regulator.yaml
> > > b/Documentation/devicetree/bindings/regulator/rohm,bd71815-
> > > regulator.yaml
> > > new file mode 100644
> > > index 000000000000..2aa21603698c
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/regulator/rohm,bd71815-
> > > regulator.yaml
> > > @@ -0,0 +1,104 @@
> > > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> > > +%YAML 1.2
> > > +---
> > > +$id: 
> > > http://devicetree.org/schemas/regulator/rohm,bd71815-regulator.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: ROHM BD71815 Power Management Integrated Circuit regulators
> > > +
> > > +maintainers:
> > > +  - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
> > > +
> > > +description: |
> > > +  This module is part of the ROHM BD718215 MFD device. For more
> > > details
> > > +  see Documentation/devicetree/bindings/mfd/rohm,bd71815-
> > > pmic.yaml.
> > > +
> > > +  The regulator controller is represented as a sub-node of the
> > > PMIC node
> > > +  on the device tree.
> > > +
> > > +  The valid names for BD71815 regulator nodes are
> > > +  buck1, buck2, buck3, buck4, buck5,
> > > +  ldo1, ldo2, ldo3, ldo4, ldo5,
> > > +  ldodvref, ldolpsr, wled
> > 
> > No schema for the last 3?
> 
> Thanks Rob. I'm unsure what I have been thinking of :( I'll fix this
> for next version.
> 
> > 
> > > +
> > > +patternProperties:
> > > +  "^(ldo|buck)[1-5]$":
> > > +    type: object
> > > +    description:
> > > +      Properties for single LDO/BUCK regulator.
> > > +    $ref: regulator.yaml#
> > > +
> > > +    properties:
> > > +      regulator-name:
> > > +        pattern: "^(ldo|buck)[1-5]$"
> > > +        description:
> > > +          should be "ldo1", ..., "ldo5" and "buck1", ..., "buck5"
> > > +
> > > +      rohm,vsel-gpios:
> > > +        description:
> > > +          GPIO used to control ldo4 state (when ldo4 is controlled
> > > by GPIO).
> > > +
> > > +      rohm,dvs-run-voltage:
> > 
> > These should have a unit suffix.
> 
> I know but these are existing properties. I'd like to re-use them as
> they have exported parser helpers - and I am unsure what kind of
> breakages changing them would cause. (The BD71837/BD71847 which
> introduced these properties are one of the PMICs which are pretty
> widely used.)

Okay. Hopefully I remember next time I see this...

Rob
Vaittinen, Matti Jan. 13, 2021, 2:23 p.m. UTC | #4
On Wed, 2021-01-13 at 07:53 -0600, Rob Herring wrote:
> On Tue, Jan 12, 2021 at 08:10:14AM +0200, Matti Vaittinen wrote:

> > On Mon, 2021-01-11 at 13:09 -0600, Rob Herring wrote:

> > > On Fri, Jan 08, 2021 at 03:36:38PM +0200, Matti Vaittinen wrote:

> > > > Add binding documentation for regulators on ROHM BD71815 PMIC.

> > > > 5 bucks, 7 LDOs and a boost for LED.

> > > > 

> > > > Signed-off-by: Matti Vaittinen <

> > > > matti.vaittinen@fi.rohmeurope.com>

> > > > ---

> > > >  .../regulator/rohm,bd71815-regulator.yaml     | 104

> > > > ++++++++++++++++++

> > > >  1 file changed, 104 insertions(+)

> > > >  create mode 100644

> > > > Documentation/devicetree/bindings/regulator/rohm,bd71815-

> > > > regulator.yaml

> > > > 

> > > > diff --git

> > > > a/Documentation/devicetree/bindings/regulator/rohm,bd71815-

> > > > regulator.yaml

> > > > b/Documentation/devicetree/bindings/regulator/rohm,bd71815-

> > > > regulator.yaml

> > > > new file mode 100644

> > > > index 000000000000..2aa21603698c

> > > > --- /dev/null

> > > > +++ b/Documentation/devicetree/bindings/regulator/rohm,bd71815-

> > > > regulator.yaml

> > > > @@ -0,0 +1,104 @@

> > > > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause

> > > > +%YAML 1.2

> > > > +---

> > > > +$id: 

> > > > http://devicetree.org/schemas/regulator/rohm,bd71815-regulator.yaml#

> > > > +$schema: http://devicetree.org/meta-schemas/core.yaml#

> > > > +

> > > > +title: ROHM BD71815 Power Management Integrated Circuit

> > > > regulators

> > > > +

> > > > +maintainers:

> > > > +  - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>

> > > > +

> > > > +description: |

> > > > +  This module is part of the ROHM BD718215 MFD device. For

> > > > more

> > > > details

> > > > +  see Documentation/devicetree/bindings/mfd/rohm,bd71815-

> > > > pmic.yaml.

> > > > +

> > > > +  The regulator controller is represented as a sub-node of the

> > > > PMIC node

> > > > +  on the device tree.

> > > > +

> > > > +  The valid names for BD71815 regulator nodes are

> > > > +  buck1, buck2, buck3, buck4, buck5,

> > > > +  ldo1, ldo2, ldo3, ldo4, ldo5,

> > > > +  ldodvref, ldolpsr, wled

> > > 

> > > No schema for the last 3?

> > 

> > Thanks Rob. I'm unsure what I have been thinking of :( I'll fix

> > this

> > for next version.

> > 

> > > > +

> > > > +patternProperties:

> > > > +  "^(ldo|buck)[1-5]$":

> > > > +    type: object

> > > > +    description:

> > > > +      Properties for single LDO/BUCK regulator.

> > > > +    $ref: regulator.yaml#

> > > > +

> > > > +    properties:

> > > > +      regulator-name:

> > > > +        pattern: "^(ldo|buck)[1-5]$"

> > > > +        description:

> > > > +          should be "ldo1", ..., "ldo5" and "buck1", ...,

> > > > "buck5"

> > > > +

> > > > +      rohm,vsel-gpios:

> > > > +        description:

> > > > +          GPIO used to control ldo4 state (when ldo4 is

> > > > controlled

> > > > by GPIO).

> > > > +

> > > > +      rohm,dvs-run-voltage:

> > > 

> > > These should have a unit suffix.

> > 

> > I know but these are existing properties. I'd like to re-use them

> > as

> > they have exported parser helpers - and I am unsure what kind of

> > breakages changing them would cause. (The BD71837/BD71847 which

> > introduced these properties are one of the PMICs which are pretty

> > widely used.)

> 

> Okay. Hopefully I remember next time I see this...


Actually, I think I can add support for rohm,dvs-run-microvolt and
fellows to these same helpers so new devices can use appropriately
named properties. That would mean there is duplicate properties for
same purpose - but maybe it allows us to eventually deprecate the old
ones... Which of these options would you prefer?

> 

> Rob
Rob Herring (Arm) Jan. 13, 2021, 3:47 p.m. UTC | #5
On Wed, Jan 13, 2021 at 8:23 AM Vaittinen, Matti
<Matti.Vaittinen@fi.rohmeurope.com> wrote:
>

>

> On Wed, 2021-01-13 at 07:53 -0600, Rob Herring wrote:

> > On Tue, Jan 12, 2021 at 08:10:14AM +0200, Matti Vaittinen wrote:

> > > On Mon, 2021-01-11 at 13:09 -0600, Rob Herring wrote:

> > > > On Fri, Jan 08, 2021 at 03:36:38PM +0200, Matti Vaittinen wrote:

> > > > > Add binding documentation for regulators on ROHM BD71815 PMIC.

> > > > > 5 bucks, 7 LDOs and a boost for LED.

> > > > >

> > > > > Signed-off-by: Matti Vaittinen <

> > > > > matti.vaittinen@fi.rohmeurope.com>

> > > > > ---

> > > > >  .../regulator/rohm,bd71815-regulator.yaml     | 104

> > > > > ++++++++++++++++++

> > > > >  1 file changed, 104 insertions(+)

> > > > >  create mode 100644

> > > > > Documentation/devicetree/bindings/regulator/rohm,bd71815-

> > > > > regulator.yaml

> > > > >

> > > > > diff --git

> > > > > a/Documentation/devicetree/bindings/regulator/rohm,bd71815-

> > > > > regulator.yaml

> > > > > b/Documentation/devicetree/bindings/regulator/rohm,bd71815-

> > > > > regulator.yaml

> > > > > new file mode 100644

> > > > > index 000000000000..2aa21603698c

> > > > > --- /dev/null

> > > > > +++ b/Documentation/devicetree/bindings/regulator/rohm,bd71815-

> > > > > regulator.yaml

> > > > > @@ -0,0 +1,104 @@

> > > > > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause

> > > > > +%YAML 1.2

> > > > > +---

> > > > > +$id:

> > > > > http://devicetree.org/schemas/regulator/rohm,bd71815-regulator.yaml#

> > > > > +$schema: http://devicetree.org/meta-schemas/core.yaml#

> > > > > +

> > > > > +title: ROHM BD71815 Power Management Integrated Circuit

> > > > > regulators

> > > > > +

> > > > > +maintainers:

> > > > > +  - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>

> > > > > +

> > > > > +description: |

> > > > > +  This module is part of the ROHM BD718215 MFD device. For

> > > > > more

> > > > > details

> > > > > +  see Documentation/devicetree/bindings/mfd/rohm,bd71815-

> > > > > pmic.yaml.

> > > > > +

> > > > > +  The regulator controller is represented as a sub-node of the

> > > > > PMIC node

> > > > > +  on the device tree.

> > > > > +

> > > > > +  The valid names for BD71815 regulator nodes are

> > > > > +  buck1, buck2, buck3, buck4, buck5,

> > > > > +  ldo1, ldo2, ldo3, ldo4, ldo5,

> > > > > +  ldodvref, ldolpsr, wled

> > > >

> > > > No schema for the last 3?

> > >

> > > Thanks Rob. I'm unsure what I have been thinking of :( I'll fix

> > > this

> > > for next version.

> > >

> > > > > +

> > > > > +patternProperties:

> > > > > +  "^(ldo|buck)[1-5]$":

> > > > > +    type: object

> > > > > +    description:

> > > > > +      Properties for single LDO/BUCK regulator.

> > > > > +    $ref: regulator.yaml#

> > > > > +

> > > > > +    properties:

> > > > > +      regulator-name:

> > > > > +        pattern: "^(ldo|buck)[1-5]$"

> > > > > +        description:

> > > > > +          should be "ldo1", ..., "ldo5" and "buck1", ...,

> > > > > "buck5"

> > > > > +

> > > > > +      rohm,vsel-gpios:

> > > > > +        description:

> > > > > +          GPIO used to control ldo4 state (when ldo4 is

> > > > > controlled

> > > > > by GPIO).

> > > > > +

> > > > > +      rohm,dvs-run-voltage:

> > > >

> > > > These should have a unit suffix.

> > >

> > > I know but these are existing properties. I'd like to re-use them

> > > as

> > > they have exported parser helpers - and I am unsure what kind of

> > > breakages changing them would cause. (The BD71837/BD71847 which

> > > introduced these properties are one of the PMICs which are pretty

> > > widely used.)

> >

> > Okay. Hopefully I remember next time I see this...

>

> Actually, I think I can add support for rohm,dvs-run-microvolt and

> fellows to these same helpers so new devices can use appropriately

> named properties. That would mean there is duplicate properties for

> same purpose - but maybe it allows us to eventually deprecate the old

> ones... Which of these options would you prefer?


Just keep the existing ones.

Rob
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml
new file mode 100644
index 000000000000..2aa21603698c
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml
@@ -0,0 +1,104 @@ 
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/rohm,bd71815-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD71815 Power Management Integrated Circuit regulators
+
+maintainers:
+  - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+
+description: |
+  This module is part of the ROHM BD718215 MFD device. For more details
+  see Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml.
+
+  The regulator controller is represented as a sub-node of the PMIC node
+  on the device tree.
+
+  The valid names for BD71815 regulator nodes are
+  buck1, buck2, buck3, buck4, buck5,
+  ldo1, ldo2, ldo3, ldo4, ldo5,
+  ldodvref, ldolpsr, wled
+
+patternProperties:
+  "^(ldo|buck)[1-5]$":
+    type: object
+    description:
+      Properties for single LDO/BUCK regulator.
+    $ref: regulator.yaml#
+
+    properties:
+      regulator-name:
+        pattern: "^(ldo|buck)[1-5]$"
+        description:
+          should be "ldo1", ..., "ldo5" and "buck1", ..., "buck5"
+
+      rohm,vsel-gpios:
+        description:
+          GPIO used to control ldo4 state (when ldo4 is controlled by GPIO).
+
+      rohm,dvs-run-voltage:
+        description:
+          PMIC "RUN" state voltage in uV when PMIC HW states are used. See
+          comments below for bucks/LDOs which support this. 0 means
+          regulator should be disabled at RUN state.
+        $ref: "/schemas/types.yaml#/definitions/uint32"
+        minimum: 0
+        maximum: 3300000
+
+      rohm,dvs-snvs-voltage:
+        description:
+          Whether to keep regulator enabled at "SNVS" state or not.
+          0 means regulator should be disabled at SNVS state, non zero voltage
+          keeps regulator enabled. BD71815 does not change voltage level
+          when PMIC transitions to SNVS.SNVS voltage depends on the previous
+          state (from which the PMIC transitioned to SNVS).
+        $ref: "/schemas/types.yaml#/definitions/uint32"
+        minimum: 0
+        maximum: 3300000
+
+      rohm,dvs-suspend-voltage:
+        description:
+          PMIC "SUSPEND" state voltage in uV when PMIC HW states are used. See
+          comments below for bucks/LDOs which support this. 0 means
+          regulator should be disabled at SUSPEND state.
+        $ref: "/schemas/types.yaml#/definitions/uint32"
+        minimum: 0
+        maximum: 3300000
+
+      rohm,dvs-lpsr-voltage:
+        description:
+          PMIC "LPSR" state voltage in uV when PMIC HW states are used. See
+          comments below for bucks/LDOs which support this. 0 means
+          regulator should be disabled at LPSR state.
+        $ref: "/schemas/types.yaml#/definitions/uint32"
+        minimum: 0
+        maximum: 3300000
+
+        # Bucks 1 and 2 support giving separate voltages for operational states
+        # (RUN /CLEAN according to data-sheet) and non operational states
+        # (LPSR/SUSPEND). The voltage is automatically changed when HW
+        # state changes. Omitting these properties from bucks 1 and 2 leave
+        # buck voltages to not be toggled by HW state. Enable status may still
+        # be toggled by state changes depending on HW default settings.
+        #
+        # Bucks 3-5 and ldos 1-5 support setting the RUN state voltage here.
+        # Given RUN voltage is used at all states if regulator is enabled at
+        # given state.
+        # Values given for other states are regarded as enable/disable at
+        # given state (see below).
+        #
+        # All regulators except WLED support specifying enable/disable status
+        # for each of the HW states (RUN/SNVS/SUSPEND/LPSR). HW defaults can
+        # be overridden by setting voltage to 0 (regulator disabled at given
+        # state) or non-zero (regulator enabled at given state). Please note
+        # that setting non zero voltages for bucks 1/2 will also enable voltage
+        # changes according to state change.
+
+    required:
+      - regulator-name
+
+    unevaluatedProperties: false
+
+additionalProperties: false