diff mbox series

[v3,4/8] riscv: dts: thead: Add TH1520 GPIO ranges

Message ID 20240930-th1520-pinctrl-v3-4-32cea2bdbecb@tenstorrent.com
State New
Headers show
Series [v3,1/8] dt-bindings: pinctrl: Add thead,th1520-pinctrl bindings | expand

Commit Message

Drew Fustini Sept. 30, 2024, 7:50 p.m. UTC
From: Emil Renner Berthing <emil.renner.berthing@canonical.com>

Add gpio-ranges properties to the TH1520 device tree, so user space can
change basic pinconf settings for GPIOs and are not allowed to use pads
already used by other functions.

Adjust number of GPIOs available for the different controllers.

Acked-by: Rob Herring <robh@kernel.org>
Tested-by: Thomas Bonnefille <thomas.bonnefille@bootlin.com>
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Drew Fustini <dfustini@tenstorrent.com>
---
 arch/riscv/boot/dts/thead/th1520.dtsi | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/arch/riscv/boot/dts/thead/th1520.dtsi b/arch/riscv/boot/dts/thead/th1520.dtsi
index e4eda2a76595..7dcc250ee1d1 100644
--- a/arch/riscv/boot/dts/thead/th1520.dtsi
+++ b/arch/riscv/boot/dts/thead/th1520.dtsi
@@ -334,6 +334,7 @@  portc: gpio-controller@0 {
 				gpio-controller;
 				#gpio-cells = <2>;
 				ngpios = <32>;
+				gpio-ranges = <&padctrl0_apsys 0 0 32>;
 				reg = <0>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
@@ -352,7 +353,8 @@  portd: gpio-controller@0 {
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				ngpios = <32>;
+				ngpios = <23>;
+				gpio-ranges = <&padctrl0_apsys 0 32 23>;
 				reg = <0>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
@@ -379,6 +381,7 @@  porta: gpio-controller@0 {
 				gpio-controller;
 				#gpio-cells = <2>;
 				ngpios = <32>;
+				gpio-ranges = <&padctrl1_apsys 0 0 32>;
 				reg = <0>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
@@ -397,7 +400,8 @@  portb: gpio-controller@0 {
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				ngpios = <32>;
+				ngpios = <31>;
+				gpio-ranges = <&padctrl1_apsys 0 32 31>;
 				reg = <0>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
@@ -550,7 +554,8 @@  porte: gpio-controller@0 {
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				ngpios = <32>;
+				ngpios = <16>;
+				gpio-ranges = <&padctrl_aosys 0 9 16>;
 				reg = <0>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
@@ -575,7 +580,8 @@  portf: gpio-controller@0 {
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				ngpios = <32>;
+				ngpios = <23>;
+				gpio-ranges = <&padctrl_aosys 0 25 22>, <&padctrl_aosys 22 7 1>;
 				reg = <0>;
 				interrupt-controller;
 				#interrupt-cells = <2>;