From patchwork Wed Jul 31 06:28:10 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Ivan T . Ivanov" X-Patchwork-Id: 815780 Received: from smtp-out2.suse.de (smtp-out2.suse.de [195.135.223.131]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id F14E816D4D6; Wed, 31 Jul 2024 06:26:54 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=195.135.223.131 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1722407217; cv=none; b=arZsmrVnX5slOXep2VGXn90jfX7x5MdCT/8hNtdpknWHObh+7WEaZeq1urHRvBAJssbujCOXOY2w0dYaoBeOQlgPwVBOyLrdZalAZhzzINEBzG+KXCfn1sNv3bKxaopUrKR3FUSXCaiXrjKArAxFYMxCh6DfoStqI+0uJWwi58I= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1722407217; c=relaxed/simple; bh=yCi73C+1KGVpu3cmj5A7jlD4Sy/SPvy1llkAP4psQ/M=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=nkhZ+CY+JBvLBgdNzGrgJ0e+xESGUIVOZAfCokLnCYZaFCWP4G/xFiajCFXTYSuJbDTmYw/M+/ew38boWvv2kJ3FyU3qchZc02Psb46J5CmhNNh+40NqETAOrnNXYEoC5TXm83+mGhYRCBsCqDnmDjkeGrrOsQQsE5McV3PaK1Y= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=suse.de; spf=pass smtp.mailfrom=suse.de; dkim=pass (1024-bit key) header.d=suse.de header.i=@suse.de header.b=rRuYh+uX; dkim=permerror (0-bit key) header.d=suse.de header.i=@suse.de header.b=8qU4Gwm/; dkim=pass (1024-bit key) header.d=suse.de header.i=@suse.de header.b=YfHIWXEZ; dkim=permerror (0-bit key) header.d=suse.de header.i=@suse.de header.b=12wdswqc; arc=none smtp.client-ip=195.135.223.131 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=suse.de Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=suse.de Authentication-Results: smtp.subspace.kernel.org; dkim=pass (1024-bit key) header.d=suse.de header.i=@suse.de header.b="rRuYh+uX"; dkim=permerror (0-bit key) header.d=suse.de header.i=@suse.de header.b="8qU4Gwm/"; dkim=pass (1024-bit key) header.d=suse.de header.i=@suse.de header.b="YfHIWXEZ"; dkim=permerror (0-bit key) header.d=suse.de header.i=@suse.de header.b="12wdswqc" Received: from imap1.dmz-prg2.suse.org (unknown [10.150.64.97]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest SHA256) (No client certificate requested) by smtp-out2.suse.de (Postfix) with ESMTPS id 388831FD6E; Wed, 31 Jul 2024 06:26:52 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=suse.de; s=susede2_rsa; t=1722407213; h=from:from:reply-to:date:date:message-id:message-id:to:to:cc:cc: mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=HdgTKy62vUQL2glOScLG9XgqvoXNeHn4ZTh7yyjL6x0=; b=rRuYh+uXK0jsyXc8KfqKW1Ji9kIppeyk7Z2h8eLXVqbBv042WQcV19Hc6dLHTyM08K149+ JUO2uejdmInwfp5Lro5cdDobHD9HBJn6TKKwQ36ptY50acwT0g7hdkQE3Qiy4MYVM50rss x3eT6nf1z9tSsA96l7V114jEIs7OF9c= DKIM-Signature: v=1; a=ed25519-sha256; c=relaxed/relaxed; d=suse.de; s=susede2_ed25519; t=1722407213; h=from:from:reply-to:date:date:message-id:message-id:to:to:cc:cc: mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=HdgTKy62vUQL2glOScLG9XgqvoXNeHn4ZTh7yyjL6x0=; b=8qU4Gwm/wxT3k1GP/LqHUsoGjfhwWbDm8uDGCb2X9R7gRBEvSzyyW+Afse/PogsNQCMFa7 H4L/YBk8WlrmIzBg== Authentication-Results: smtp-out2.suse.de; none DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=suse.de; s=susede2_rsa; t=1722407212; h=from:from:reply-to:date:date:message-id:message-id:to:to:cc:cc: mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=HdgTKy62vUQL2glOScLG9XgqvoXNeHn4ZTh7yyjL6x0=; b=YfHIWXEZ5x7lWfP6DqYrW/+PLfj60OKOtHhHkGQA2oQ1A3A9C+fFPvHfJKsUqgDsWo77P8 DIm8fnQ9SScgE817oVWJJYnXDwkYtuBMtgpC3JYmtUva5/NVr4qrNVgqOg8r0QUzNvpHF/ EMd2KZJb90oK/GWG74m0nsYhbQKbUJs= DKIM-Signature: v=1; a=ed25519-sha256; c=relaxed/relaxed; d=suse.de; s=susede2_ed25519; t=1722407212; h=from:from:reply-to:date:date:message-id:message-id:to:to:cc:cc: mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=HdgTKy62vUQL2glOScLG9XgqvoXNeHn4ZTh7yyjL6x0=; b=12wdswqcLS2+wgW7m9Z/yGJHAs5NBQdPAEv9LldDEsW6CopuL4J1Cvb3PRUtjeoSx+MbQG d+qGX5iVMpt9bRDw== Received: from imap1.dmz-prg2.suse.org (localhost [127.0.0.1]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest SHA256) (No client certificate requested) by imap1.dmz-prg2.suse.org (Postfix) with ESMTPS id 1815A13ADB; Wed, 31 Jul 2024 06:26:52 +0000 (UTC) Received: from dovecot-director2.suse.de ([2a07:de40:b281:106:10:150:64:167]) by imap1.dmz-prg2.suse.org with ESMTPSA id 4NRtBSzZqWYkZgAAD6G6ig (envelope-from ); Wed, 31 Jul 2024 06:26:52 +0000 From: "Ivan T. Ivanov" To: linus.walleij@linaro.org, robh@kernel.org, krzk+dt@kernel.org Cc: conor+dt@kernel.org, florian.fainelli@broadcom.com, wahrenst@gmx.net, andrea.porta@suse.com, linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH 3/7] arm64: dts: broadcom: Add support for BCM2712 Date: Wed, 31 Jul 2024 09:28:10 +0300 Message-ID: <20240731062814.215833-4-iivanov@suse.de> X-Mailer: git-send-email 2.43.0 In-Reply-To: <20240731062814.215833-1-iivanov@suse.de> References: <20240731062814.215833-1-iivanov@suse.de> Precedence: bulk X-Mailing-List: linux-gpio@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-Spam-Level: X-Spamd-Result: default: False [-1.10 / 50.00]; BAYES_HAM(-3.00)[100.00%]; SUSPICIOUS_RECIPS(1.50)[]; MID_CONTAINS_FROM(1.00)[]; NEURAL_HAM_LONG(-1.00)[-1.000]; R_MISSING_CHARSET(0.50)[]; MIME_GOOD(-0.10)[text/plain]; RCPT_COUNT_SEVEN(0.00)[10]; ARC_NA(0.00)[]; RCVD_COUNT_TWO(0.00)[2]; MIME_TRACE(0.00)[0:+]; TAGGED_RCPT(0.00)[dt]; RCVD_VIA_SMTP_AUTH(0.00)[]; FUZZY_BLOCKED(0.00)[rspamd.com]; DKIM_SIGNED(0.00)[suse.de:s=susede2_rsa,suse.de:s=susede2_ed25519]; RCVD_TLS_ALL(0.00)[]; FROM_EQ_ENVFROM(0.00)[]; FREEMAIL_CC(0.00)[kernel.org,broadcom.com,gmx.net,suse.com,vger.kernel.org,lists.infradead.org]; R_RATELIMIT(0.00)[to_ip_from(RLj7gjeczi4zsfac5deuh19f3d)]; TO_DN_NONE(0.00)[]; FROM_HAS_DN(0.00)[]; TO_MATCH_ENVRCPT_ALL(0.00)[]; DBL_BLOCKED_OPENRESOLVER(0.00)[imap1.dmz-prg2.suse.org:helo,0.0.0.1:email]; FREEMAIL_ENVRCPT(0.00)[gmx.net] X-Spam-Flag: NO X-Spam-Score: -1.10 From: Andrea della Porta The BCM2712 SoC family can be found on Raspberry Pi 5. Add minimal SoC and board (Rpi5 specific) dts file to be able to boot from SD card and use console on debug UART. Signed-off-by: Andrea della Porta --- arch/arm64/boot/dts/broadcom/Makefile | 1 + .../boot/dts/broadcom/bcm2712-rpi-5-b.dts | 62 ++++ arch/arm64/boot/dts/broadcom/bcm2712.dtsi | 302 ++++++++++++++++++ 3 files changed, 365 insertions(+) create mode 100644 arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts create mode 100644 arch/arm64/boot/dts/broadcom/bcm2712.dtsi diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile index 8b4591ddd27c..92565e9781ad 100644 --- a/arch/arm64/boot/dts/broadcom/Makefile +++ b/arch/arm64/boot/dts/broadcom/Makefile @@ -6,6 +6,7 @@ DTC_FLAGS := -@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-400.dtb \ bcm2711-rpi-4-b.dtb \ bcm2711-rpi-cm4-io.dtb \ + bcm2712-rpi-5-b.dtb \ bcm2837-rpi-3-a-plus.dtb \ bcm2837-rpi-3-b.dtb \ bcm2837-rpi-3-b-plus.dtb \ diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts new file mode 100644 index 000000000000..b5921437e09f --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts @@ -0,0 +1,62 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include +#include "bcm2712.dtsi" + +/ { + compatible = "raspberrypi,5-model-b", "brcm,bcm2712"; + model = "Raspberry Pi 5"; + + aliases { + serial10 = &uart0; + }; + + chosen: chosen { + stdout-path = "serial10:115200n8"; + }; + + /* Will be filled by the bootloader */ + memory@0 { + device_type = "memory"; + reg = <0 0 0x28000000>; + }; + + sd_io_1v8_reg: sd-io-1v8-reg { + compatible = "regulator-gpio"; + regulator-name = "vdd-sd-io"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + regulator-settling-time-us = <5000>; + gpios = <&gio_aon 3 GPIO_ACTIVE_HIGH>; + states = <1800000 0x1>, + <3300000 0x0>; + }; + + sd_vcc_reg: sd-vcc-reg { + compatible = "regulator-fixed"; + regulator-name = "vcc-sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + gpios = <&gio_aon 4 GPIO_ACTIVE_HIGH>; + }; +}; + +/* The system UART */ +&uart0 { + status = "okay"; +}; + +/* SDIO1 is used to drive the SD card */ +&sdio1 { + vqmmc-supply = <&sd_io_1v8_reg>; + vmmc-supply = <&sd_vcc_reg>; + bus-width = <4>; + sd-uhs-sdr50; + sd-uhs-ddr50; + sd-uhs-sdr104; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcm2712.dtsi b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi new file mode 100644 index 000000000000..398df13148bd --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi @@ -0,0 +1,302 @@ +// SPDX-License-Identifier: GPL-2.0 +#include + +/ { + compatible = "brcm,bcm2712"; + + #address-cells = <2>; + #size-cells = <1>; + + interrupt-parent = <&gicv2>; + + axi: axi { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + + sdio1: mmc@1000fff000 { + compatible = "brcm,bcm2712-sdhci", + "brcm,sdhci-brcmstb"; + reg = <0x10 0x00fff000 0x260>, + <0x10 0x00fff400 0x200>; + reg-names = "host", "cfg"; + interrupts = ; + clocks = <&clk_emmc2>; + clock-names = "sw_sdio"; + mmc-ddr-3_3v; + }; + + gicv2: interrupt-controller@107fff9000 { + interrupt-controller; + #interrupt-cells = <3>; + compatible = "arm,gic-400"; + reg = <0x10 0x7fff9000 0x1000>, + <0x10 0x7fffa000 0x2000>, + <0x10 0x7fffc000 0x2000>, + <0x10 0x7fffe000 0x2000>; + interrupts = ; + }; + }; + + clocks { + /* The oscillator is the root of the clock tree. */ + clk_osc: clk-osc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "osc"; + clock-frequency = <54000000>; + }; + + clk_vpu: clk-vpu { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <750000000>; + clock-output-names = "vpu-clock"; + }; + + clk_uart: clk-uart { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <9216000>; + clock-output-names = "uart-clock"; + }; + + clk_emmc2: clk-emmc2 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <200000000>; + clock-output-names = "emmc2-clock"; + }; + }; + + cpus: cpus { + #address-cells = <1>; + #size-cells = <0>; + + /* Source for d/i cache-line-size, cache-sets, cache-size + * https://developer.arm.com/documentation/100798/0401 + * /L1-memory-system/About-the-L1-memory-system?lang=en + */ + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x000>; + enable-method = "psci"; + d-cache-size = <0x10000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set + i-cache-size = <0x10000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set + next-level-cache = <&l2_cache_l0>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x100>; + enable-method = "psci"; + d-cache-size = <0x10000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set + i-cache-size = <0x10000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set + next-level-cache = <&l2_cache_l1>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x200>; + enable-method = "psci"; + d-cache-size = <0x10000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set + i-cache-size = <0x10000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set + next-level-cache = <&l2_cache_l2>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x300>; + enable-method = "psci"; + d-cache-size = <0x10000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set + i-cache-size = <0x10000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set + next-level-cache = <&l2_cache_l3>; + }; + + /* Source for cache-line-size and cache-sets: + * https://developer.arm.com/documentation/100798/0401 + * /L2-memory-system/About-the-L2-memory-system?lang=en + * and for cache-size: + * https://www.raspberrypi.com/documentation/computers + * /processors.html#bcm2712 + */ + l2_cache_l0: l2-cache-l0 { + compatible = "cache"; + cache-size = <0x80000>; + cache-line-size = <128>; + cache-sets = <1024>; // 512KiB(size)/64(line-size)=8192ways/8-way set + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_cache>; + }; + + l2_cache_l1: l2-cache-l1 { + compatible = "cache"; + cache-size = <0x80000>; + cache-line-size = <128>; + cache-sets = <1024>; // 512KiB(size)/64(line-size)=8192ways/8-way set + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_cache>; + }; + + l2_cache_l2: l2-cache-l2 { + compatible = "cache"; + cache-size = <0x80000>; + cache-line-size = <128>; + cache-sets = <1024>; // 512KiB(size)/64(line-size)=8192ways/8-way set + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_cache>; + }; + + l2_cache_l3: l2-cache-l3 { + compatible = "cache"; + cache-size = <0x80000>; + cache-line-size = <128>; + cache-sets = <1024>; // 512KiB(size)/64(line-size)=8192ways/8-way set + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_cache>; + }; + + /* Source for cache-line-size and cache-sets: + * https://developer.arm.com/documentation/100453/0401/L3-cache?lang=en + * Source for cache-size: + * https://www.raspberrypi.com/documentation/computers/processors.html#bcm2712 + */ + l3_cache: l3-cache { + compatible = "cache"; + cache-size = <0x200000>; + cache-line-size = <64>; + cache-sets = <2048>; // 2MiB(size)/64(line-size)=32768ways/16-way set + cache-level = <3>; + cache-unified; + }; + }; + + psci { + method = "smc"; + compatible = "arm,psci-1.0", "arm,psci-0.2", "arm,psci"; + cpu_on = <0xc4000003>; + cpu_suspend = <0xc4000001>; + cpu_off = <0x84000002>; + }; + + rmem: reserved-memory { + #address-cells = <2>; + #size-cells = <1>; + ranges; + + atf@0 { + reg = <0x0 0x0 0x80000>; + no-map; + }; + + cma: linux,cma { + compatible = "shared-dma-pool"; + size = <0x4000000>; /* 64MB */ + reusable; + linux,cma-default; + alloc-ranges = <0x0 0x00000000 0x40000000>; + }; + }; + + soc: soc@107c000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0x7c000000 0x10 0x7c000000 0x04000000>; + /* Emulate a contiguous 30-bit address range for DMA */ + dma-ranges = <0xc0000000 0x00 0x00000000 0x40000000>, + <0x7c000000 0x10 0x7c000000 0x04000000>; + + system_timer: timer@7c003000 { + compatible = "brcm,bcm2835-system-timer"; + reg = <0x7c003000 0x1000>; + interrupts = , + , + , + ; + clock-frequency = <1000000>; + }; + + mailbox: mailbox@7c013880 { + compatible = "brcm,bcm2835-mbox"; + reg = <0x7c013880 0x40>; + interrupts = ; + #mbox-cells = <0>; + }; + + local_intc: local-intc@7cd00000 { + compatible = "brcm,bcm2836-l1-intc"; + reg = <0x7cd00000 0x100>; + }; + + uart0: serial@7d001000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x7d001000 0x200>; + interrupts = ; + clocks = <&clk_uart>, <&clk_vpu>; + clock-names = "uartclk", "apb_pclk"; + arm,primecell-periphid = <0x00241011>; + status = "disabled"; + }; + + interrupt-controller@7d517000 { + compatible = "brcm,bcm7271-l2-intc"; + reg = <0x7d517000 0x10>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <1>; + status = "disabled"; + }; + + gio_aon: gpio@7d517c00 { + compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio"; + reg = <0x7d517c00 0x40>; + gpio-controller; + #gpio-cells = <2>; + // Don't use GIO_AON as an interrupt controller because it will + // clash with the firmware monitoring the PMIC interrupt via the VPU. + brcm,gpio-bank-widths = <17 6>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + /* This only applies to the ARMv7 stub */ + arm,cpu-registers-not-fw-configured; + }; +};