diff --git a/dbus/lib/io.gpiod1.xml b/dbus/lib/io.gpiod1.xml
new file mode 100644
index 0000000..ace7d72
--- /dev/null
+++ b/dbus/lib/io.gpiod1.xml
@@ -0,0 +1,324 @@
+<!-- SPDX-License-Identifier: CC-BY-SA-4.0 -->
+<!-- SPDX-FileCopyrightText: 2022-2024 Bartosz Golaszewski <bartosz.golaszewski@linaro.org> -->
+
+<!DOCTYPE node PUBLIC "-//freedesktop//DTD D-BUS Object Introspection 1.0//EN"
+ "http://www.freedesktop.org/standards/dbus/1.0/introspect.dtd">
+
+<node>
+
+  <!--
+    io.gpiod1.Chip:
+    @short_description: Represents a single GPIO chip in the system.
+  -->
+  <interface name='io.gpiod1.Chip'>
+
+    <!--
+      Name:
+
+      Name of the chip as represented in the kernel.
+    -->
+    <property name='Name' type='s' access='read'/>
+
+    <!--
+      Label:
+
+      Label of the chip as represented in the kernel.
+    -->
+    <property name='Label' type='s' access='read'/>
+
+    <!--
+      NumLines:
+
+      Number of GPIO lines exposed by this chip.
+    -->
+    <property name='NumLines' type='u' access='read'/>
+
+    <!--
+      Path:
+
+      Filesystem path used to open this chip.
+    -->
+    <property name='Path' type='ay' access='read'/>
+
+    <!--
+      RequestLines:
+      @line_config: Line configuration. See below for details.
+      @request_config: Request configuration. See below for details.
+      @request_path: Object path pointing to the newly added request.
+
+      Requests a set of lines and makes it possible for the users of this API
+      to manipulate them depending on the line configuration.
+
+      Line configuration is a tuple of two arrays. The first one contains
+      mappings of arrays of line offsets to sets of line settings. The second
+      contains the list of default output values which are only used in output
+      mode.
+
+      Available line config options:
+
+        "direction" => String representing the line direction. Accepts the
+                       following values: "input", "output".
+        "edge" => String representing the edge detection setting. Accepts the
+                  following values: "falling", "rising", "both".
+        "active-low" => Boolean representing the active-low setting.
+        "drive" => String representing the drive settings. Accepts the
+                   following values: "push-pull", "open-drain", "open-source".
+        "bias" => String representing the internal bias settings. Accepts the
+                  following values: "disabled", "pull-up", "pull-down", "as-is".
+        "debounce-period" => Debounce period in microseconds represented as a
+                             signed, 64-bit integer.
+        "event-clock" => String representing the clock used to timestamp edge
+                         events. Accepts the following values: "monotonic",
+                         "realtime", "hte".
+
+      Output values are applied to the lines in the order they appear in the
+      settings mappings.
+
+      Example variant that allows to request lines at offsets 1, 5 and 11 in
+      output, push-pull and active-low modes and specifies the output values
+      as active (as visualized with g_variant_print()):
+
+        // Line config tuple
+        (
+          // Array of line settings mappings
+          [
+            // Single mapping tuple
+            (
+              // Offsets to map
+              [1, 5, 11],
+              // Line settings dict
+              {
+                'direction': <'output'>,
+                'drive': <'push-pull'>,
+                'active-low': <true>
+              }
+            )
+          ],
+          // Output values
+          [1, 1, 1]
+        )
+
+      Request configuration is a hashmap mapping names of the available config
+      options to their values wrapped in a variant.
+
+      Available request config options:
+
+        "consumer" => Consumer name as a string
+        "event-buffer-size" => Requested size of the in-kernel edge event
+                               buffer as an unsigned 32-bit integer.
+
+      The object path to the new request is returned on success. The user
+      should wait for it to appear before trying to use the requested lines in
+      any way.
+    -->
+    <method name='RequestLines'>
+      <arg name='line_config' direction='in' type='(a(aua{sv})ai)'/>
+      <arg name='request_config' direction='in' type='a{sv}'/>
+      <arg name='request_path' direction='out' type='o'/>
+    </method>
+
+  </interface>
+
+  <!--
+    io.gpiod1.Line:
+    @short_description: Represents a single GPIO line on a chip.
+  -->
+  <interface name='io.gpiod1.Line'>
+
+    <!--
+      Offset:
+
+      Uniquely identifies the line on the chip.
+    -->
+    <property name='Offset' type='u' access='read'/>
+
+    <!--
+      Name:
+
+      Name of the GPIO line as represented in the kernel.
+    -->
+    <property name='Name' type='s' access='read'/>
+
+    <!--
+      Used:
+
+      True if line is busy.
+
+      Line can be used by gpio-manager, another user-space process, a kernel
+      driver or is hogged. The exact reason a line is busy cannot be determined
+      from user-space unless it's known to be managed by gpio-manager (see:
+      the Managed property of this interface).
+    -->
+    <property name='Used' type='b' access='read'/>
+
+    <!--
+      Consumer:
+
+      Name of the consumer of the line.
+    -->
+    <property name='Consumer' type='s' access='read'/>
+
+    <!--
+      Direction:
+
+      Direction of the line. Returns "input" or "output".
+    -->
+    <property name='Direction' type='s' access='read'/>
+
+    <!--
+      EdgeDetection:
+
+      Edge detection settings of the line. Returns: "none", "falling",
+      "rising" or "both".
+    -->
+    <property name='EdgeDetection' type='s' access='read'/>
+
+    <!--
+      Bias:
+
+      Bias setting of the line. Returns: "unknown", "disabled, "pull-up" or
+      "pull-down".
+    -->
+    <property name='Bias' type='s' access='read'/>
+
+    <!--
+      Drive:
+
+      Drive setting of the line. Returns "push-pull", "open-source" or
+      "open-drain".
+    -->
+    <property name='Drive' type='s' access='read'/>
+
+    <!--
+      ActiveLow:
+
+      True if the line is active-low. False for active-high.
+    -->
+    <property name='ActiveLow' type='b' access='read'/>
+
+    <!--
+      Debounced:
+
+      True if line is being debounced on interrupts. Can only be true with
+      edge-detection enabled.
+    -->
+    <property name='Debounced' type='b' access='read'/>
+
+    <!--
+      DebouncePeriodUs:
+
+      Debounce period in microseconds. 0 if the line is not debounced. Can
+      only be non-zero with edge-detection enabled.
+    -->
+    <property name='DebouncePeriodUs' type='t' access='read'/>
+
+    <!--
+      EventClock:
+
+      System clock used to timestamp edge events on this line. Returns:
+      "monotonic", "realtime", "hte" or "unknown". New types may be added in
+      the future. Clients should interpret other types they don't recognize as
+      "unknown".
+    -->
+    <property name='EventClock' type='s' access='read'/>
+
+    <!--
+      Managed:
+
+      True if the line is managed by gpio-manager.
+    -->
+    <property name='Managed' type='b' access='read'/>
+
+    <!--
+      RequestPath:
+
+      If this line is managed by gpio-manager then this property will contain
+      the DBus object path pointing to the managing request object.
+    -->
+    <property name='RequestPath' type='o' access='read'/>
+
+    <!--
+      EdgeEvent:
+      @event_data: Contains the edge (1 for rising, 0 for falling), timestamp
+                   in nanoseconds and the global & line-local sequence numbers.
+
+      If the line is managed by the gpio-manager and is requested with edge
+      detection enabled then this signal will be emitted for every edge event
+      registered on this line.
+
+      D-Bus EdgeEvent signals are designed for low-to-medium frequency
+      interrupts. If you performance better than the order of tens of HZ, you
+      should probably access the line directly using the kernel uAPI.
+    -->
+    <signal name='EdgeEvent'>
+      <arg name='event_data' type='(ittt)'/>
+    </signal>
+
+  </interface>
+
+  <!--
+    io.gpiod1.Request:
+    @short_description: Represents a set of requested GPIO lines.
+  -->
+  <interface name='io.gpiod1.Request'>
+
+    <!--
+      ChipPath:
+
+      DBus object path pointing to the chip exposing the lines held by this
+      request.
+    -->
+    <property name='ChipPath' type='o' access='read'/>
+
+    <!--
+      LinePaths:
+
+      Array of DBus object paths pointing to the lines held by this request.
+    -->
+    <property name='LinePaths' type='ao' access='read'/>
+
+    <!--
+      Release:
+
+      Release the requested lines. After this method returns, the request
+      object on which it was called will be destroyed.
+    -->
+    <method name='Release'/>
+
+    <!--
+      ReconfigureLines:
+      @line_config: Line configuration. Refer to the RequestLines method of
+                    the io.gpiod1.Chip interface for details.
+
+      Change the configuration of lines held by this request object without
+      releasing them.
+    -->
+    <method name='ReconfigureLines'>
+      <arg name='line_config' direction='in' type='(a(aua{sv})ai)'/>
+    </method>
+
+    <!--
+      GetValues:
+      @offsets: Array of line offsets within the request to read values for.
+      @values: Array of values in the order lines were specified in @offsets.
+
+      Read the values for a set of lines held by the request.
+    -->
+    <method name='GetValues'>
+      <arg name='offsets' direction='in' type='au'/>
+      <arg name='values' direction='out' type='ai'/>
+    </method>
+
+    <!--
+      SetValues:
+      @values: Array of mappings from line offsets to desired output values.
+
+      Set the values for a set of lines held by the request.
+    -->
+    <method name='SetValues'>
+      <arg name='values' direction='in' type='a{ui}'/>
+    </method>
+
+  </interface>
+
+</node>
