diff mbox series

[libgpiod,v2,06/18] bindings: glib: add examples

Message ID 20240628-dbus-v2-6-e42336efe2d3@linaro.org
State New
Headers show
Series dbus: add GLib-based DBus daemon and command-line client | expand

Commit Message

Bartosz Golaszewski June 28, 2024, 2:53 p.m. UTC
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Add example programs showcasing the usage of GLib bindings to libgpiod.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
 bindings/glib/examples/find_line_by_name_glib.c    |  68 +++++++++++
 bindings/glib/examples/get_chip_info_glib.c        |  39 ++++++
 bindings/glib/examples/get_line_info_glib.c        |  79 ++++++++++++
 bindings/glib/examples/get_line_value_glib.c       |  67 +++++++++++
 .../glib/examples/get_multiple_line_values_glib.c  |  72 +++++++++++
 .../examples/reconfigure_input_to_output_glib.c    | 103 ++++++++++++++++
 bindings/glib/examples/toggle_line_value_glib.c    |  99 ++++++++++++++++
 .../examples/toggle_multiple_line_values_glib.c    | 132 +++++++++++++++++++++
 bindings/glib/examples/watch_line_info_glib.c      |  63 ++++++++++
 bindings/glib/examples/watch_line_value_glib.c     |  91 ++++++++++++++
 .../examples/watch_multiple_edge_rising_glib.c     |  95 +++++++++++++++
 11 files changed, 908 insertions(+)
diff mbox series

Patch

diff --git a/bindings/glib/examples/find_line_by_name_glib.c b/bindings/glib/examples/find_line_by_name_glib.c
new file mode 100644
index 0000000..46a193e
--- /dev/null
+++ b/bindings/glib/examples/find_line_by_name_glib.c
@@ -0,0 +1,68 @@ 
+// SPDX-License-Identifier: GPL-2.0-or-later
+// SPDX-FileCopyrightText: 2023 Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
+
+/* Minimal example of finding a line with the given name. */
+
+#include <glib.h>
+#include <gpiod-glib.h>
+#include <stdlib.h>
+
+int main(void)
+{
+	/* Example configuration - customize to suit your situation. */
+	static const gchar *const line_name = "GPIO0";
+
+	g_autoptr(GPIODChipInfo) info = NULL;
+	g_autoptr(GError) err = NULL;
+	g_autoptr(GDir) dir = NULL;
+	const gchar *filename;
+	gboolean ret;
+	guint offset;
+
+	dir = g_dir_open("/dev", 0, &err);
+	if (err) {
+		g_printerr("Unable to open /dev: %s\n", err->message);
+		return EXIT_FAILURE;
+	}
+
+	/*
+	 * Names are not guaranteed unique, so this finds the first line with
+	 * the given name.
+	 */
+	while ((filename = g_dir_read_name(dir))) {
+		g_autoptr(GPIODChip) chip = NULL;
+		g_autofree gchar *path = NULL;
+
+		path = g_strdup_printf("/dev/%s", filename);
+		if (!g_gpiod_is_gpiochip_device(path))
+			continue;
+
+		chip = g_gpiod_chip_new(path, &err);
+		if (err) {
+			g_printerr("Failed to open the GPIO chip at '%s': %s\n",
+				   path, err->message);
+			return EXIT_FAILURE;
+		}
+
+		ret = g_gpiod_chip_get_line_offset_from_name(chip, line_name,
+							     &offset, &err);
+		if (!ret) {
+			g_printerr("Failed to map the line name '%s' to offset: %s\n",
+				   line_name, err->message);
+			return EXIT_FAILURE;
+		}
+
+		info = g_gpiod_chip_get_info(chip, &err);
+		if (!info) {
+			g_printerr("Failed to get chip info: %s\n",
+				   err->message);
+			return EXIT_FAILURE;
+		}
+
+		g_print("%s %u\n", g_gpiod_chip_info_get_name(info), offset);
+	}
+
+	g_print("line '%s' not found\n", line_name);
+
+	return EXIT_SUCCESS;
+}
diff --git a/bindings/glib/examples/get_chip_info_glib.c b/bindings/glib/examples/get_chip_info_glib.c
new file mode 100644
index 0000000..1f1811a
--- /dev/null
+++ b/bindings/glib/examples/get_chip_info_glib.c
@@ -0,0 +1,39 @@ 
+// SPDX-License-Identifier: GPL-2.0-or-later
+// SPDX-FileCopyrightText: 2023 Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
+
+/* Minimal example of reading the info for a chip. */
+
+#include <glib.h>
+#include <gpiod-glib.h>
+#include <stdlib.h>
+
+int main(void)
+{
+	/* Example configuration - customize to suit your situation. */
+	static const gchar *const chip_path = "/dev/gpiochip0";
+
+	g_autoptr(GPIODChipInfo) info = NULL;
+	g_autoptr(GPIODChip) chip = NULL;
+	g_autoptr(GError) err = NULL;
+
+	chip = g_gpiod_chip_new(chip_path, &err);
+	if (err) {
+		g_printerr("Failed to open the GPIO chip at '%s': %s\n",
+			   chip_path, err->message);
+		return EXIT_FAILURE;
+	}
+
+	info = g_gpiod_chip_get_info(chip, &err);
+	if (err) {
+		g_printerr("Failed to retrieve GPIO chip info: %s\n",
+			   err->message);
+		return EXIT_FAILURE;
+	}
+
+	g_print("%s [%s] (%u lines)\n",
+		g_gpiod_chip_info_get_name(info),
+		g_gpiod_chip_info_get_label(info),
+		g_gpiod_chip_info_get_num_lines(info));
+
+	return EXIT_SUCCESS;
+}
diff --git a/bindings/glib/examples/get_line_info_glib.c b/bindings/glib/examples/get_line_info_glib.c
new file mode 100644
index 0000000..f3da267
--- /dev/null
+++ b/bindings/glib/examples/get_line_info_glib.c
@@ -0,0 +1,79 @@ 
+// SPDX-License-Identifier: GPL-2.0-or-later
+// SPDX-FileCopyrightText: 2022-2023 Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
+
+/* Minimal example of reading the info for a line. */
+
+#include <glib.h>
+#include <gpiod-glib.h>
+#include <stdlib.h>
+
+static GString *make_flags(GPIODLineInfo *info)
+{
+	g_autofree gchar *drive_str = NULL;
+	g_autofree gchar *edge_str = NULL;
+	g_autofree gchar *bias_str = NULL;
+	GPIODLineDrive drive;
+	GPIODLineEdge edge;
+	GPIODLineBias bias;
+	GString *ret;
+
+	edge = g_gpiod_line_info_get_edge_detection(info);
+	bias = g_gpiod_line_info_get_bias(info);
+	drive = g_gpiod_line_info_get_drive(info);
+
+	edge_str = g_enum_to_string(G_GPIOD_LINE_EDGE_TYPE, edge);
+	bias_str = g_enum_to_string(G_GPIOD_LINE_BIAS_TYPE, bias);
+	drive_str = g_enum_to_string(G_GPIOD_LINE_DRIVE_TYPE, drive);
+
+	ret = g_string_new(NULL);
+	g_string_printf(ret, "%s, %s, %s", edge_str, bias_str, drive_str);
+	g_string_replace(ret, "G_GPIOD_LINE_", "", 0);
+
+	return ret;
+}
+
+int main(void)
+{
+	/* Example configuration - customize to suit your situation. */
+	static const gchar *const chip_path = "/dev/gpiochip0";
+	static const guint line_offset = 4;
+
+	g_autoptr(GPIODLineInfo) info = NULL;
+	g_autoptr(GPIODChip) chip = NULL;
+	g_autoptr(GString) flags = NULL;
+	const gchar *name, *consumer;
+	GPIODLineDirection direction;
+	g_autoptr(GError) err = NULL;
+	gboolean active_low;
+
+	chip = g_gpiod_chip_new(chip_path, &err);
+	if (err) {
+		g_printerr("Failed to open the GPIO chip at '%s': %s\n",
+			   chip_path, err->message);
+		return EXIT_FAILURE;
+	}
+
+	info = g_gpiod_chip_get_line_info(chip, line_offset, &err);
+	if (err) {
+		g_printerr("Failed to retrieve GPIO line info: %s\n",
+			   err->message);
+		return EXIT_FAILURE;
+	}
+
+	name = g_gpiod_line_info_get_name(info);
+	consumer = g_gpiod_line_info_get_consumer(info);
+	direction = g_gpiod_line_info_get_direction(info);
+	active_low = g_gpiod_line_info_is_active_low(info);
+	flags = make_flags(info);
+
+	g_print("\tline: %u %s %s %s %s [%s]\n",
+		line_offset,
+		name ?: "unnamed",
+		consumer ?: "unused",
+		direction == G_GPIOD_LINE_DIRECTION_INPUT ?
+					"input" : "output",
+		active_low ? "active-low" : "active-high",
+		flags->str);
+
+	return EXIT_SUCCESS;
+}
diff --git a/bindings/glib/examples/get_line_value_glib.c b/bindings/glib/examples/get_line_value_glib.c
new file mode 100644
index 0000000..614390e
--- /dev/null
+++ b/bindings/glib/examples/get_line_value_glib.c
@@ -0,0 +1,67 @@ 
+// SPDX-License-Identifier: GPL-2.0-or-later
+// SPDX-FileCopyrightText: 2023 Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
+
+/* Minimal example of reading a single line. */
+
+#include <glib.h>
+#include <gpiod-glib.h>
+#include <stdlib.h>
+
+int main(void)
+{
+	/* Example configuration - customize to suit your situation. */
+	static const gchar *const chip_path = "/dev/gpiochip1";
+	static const guint line_offset = 5;
+
+	g_autoptr(GPIODRequestConfig) req_cfg = NULL;
+	g_autoptr(GPIODLineSettings) settings = NULL;
+	g_autoptr(GPIODLineRequest) request = NULL;
+	g_autoptr(GPIODLineConfig) line_cfg = NULL;
+	g_autoptr(GArray) offsets = NULL;
+	g_autoptr(GPIODChip) chip = NULL;
+	g_autoptr(GError) err = NULL;
+	guint offset;
+	gboolean ret;
+
+	chip = g_gpiod_chip_new(chip_path, &err);
+	if (!chip) {
+		g_printerr("unable to open %s: %s\n", chip_path, err->message);
+		return EXIT_FAILURE;
+	}
+
+	offsets = g_array_new(FALSE, TRUE, sizeof(guint));
+	g_array_append_val(offsets, line_offset);
+
+	settings = g_gpiod_line_settings_new(
+			"direction", G_GPIOD_LINE_DIRECTION_INPUT,
+			NULL);
+
+	line_cfg = g_gpiod_line_config_new();
+	ret = g_gpiod_line_config_add_line_settings(line_cfg, offsets,
+						    settings, &err);
+	if (!ret) {
+		g_printerr("failed to add line settings to line config: %s\n",
+			   err->message);
+		return EXIT_FAILURE;
+	}
+
+	req_cfg = g_gpiod_request_config_new("consumer", "get-line-value-glib",
+					     NULL);
+
+	request = g_gpiod_chip_request_lines(chip, req_cfg, line_cfg, &err);
+	if (!request) {
+		g_printerr("failed to request lines: %s\n", err->message);
+		return EXIT_FAILURE;
+	}
+
+	ret = g_gpiod_line_request_get_value(request, line_offset,
+					     &offset, &err);
+	if (!ret) {
+		g_printerr("failed to read line values: %s\n", err->message);
+		return EXIT_FAILURE;
+	}
+
+	g_print("%u\n", offset);
+
+	return EXIT_SUCCESS;
+}
diff --git a/bindings/glib/examples/get_multiple_line_values_glib.c b/bindings/glib/examples/get_multiple_line_values_glib.c
new file mode 100644
index 0000000..c65d45e
--- /dev/null
+++ b/bindings/glib/examples/get_multiple_line_values_glib.c
@@ -0,0 +1,72 @@ 
+// SPDX-License-Identifier: GPL-2.0-or-later
+// SPDX-FileCopyrightText: 2023 Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
+
+/* Minimal example of reading multiple lines. */
+
+#include <glib.h>
+#include <gpiod-glib.h>
+#include <stdlib.h>
+
+int main(void)
+{
+	/* Example configuration - customize to suit your situation. */
+	static const gchar *const chip_path = "/dev/gpiochip1";
+	static const guint line_offsets[] = { 5, 3, 7 };
+	static const gsize num_lines = 3;
+
+	g_autoptr(GPIODRequestConfig) req_cfg = NULL;
+	g_autoptr(GPIODLineSettings) settings = NULL;
+	g_autoptr(GPIODLineRequest) request = NULL;
+	g_autoptr(GPIODLineConfig) line_cfg = NULL;
+	g_autoptr(GArray) offsets = NULL;
+	g_autoptr(GPIODChip) chip = NULL;
+	g_autoptr(GArray) values = NULL;
+	g_autoptr(GError) err = NULL;
+	gboolean ret;
+	guint i, j;
+
+	offsets = g_array_new(FALSE, TRUE, sizeof(guint));
+	for (i = 0; i < num_lines; i++)
+		g_array_append_val(offsets, line_offsets[i]);
+
+	chip = g_gpiod_chip_new(chip_path, &err);
+	if (!chip) {
+		g_printerr("unable to open %s: %s\n", chip_path, err->message);
+		return EXIT_FAILURE;
+	}
+
+	settings = g_gpiod_line_settings_new(
+			"direction", G_GPIOD_LINE_DIRECTION_INPUT,
+			NULL);
+
+	line_cfg = g_gpiod_line_config_new();
+	ret = g_gpiod_line_config_add_line_settings(line_cfg, offsets,
+						    settings, &err);
+	if (!ret) {
+		g_printerr("failed to add line settings to line config: %s\n",
+			   err->message);
+		return EXIT_FAILURE;
+	}
+
+	req_cfg = g_gpiod_request_config_new(
+			"consumer", "get-multiple-line-values", NULL);
+
+	request = g_gpiod_chip_request_lines(chip, req_cfg, line_cfg, &err);
+	if (!request) {
+		g_printerr("failed to request lines: %s\n", err->message);
+		return EXIT_FAILURE;
+	}
+
+	ret = g_gpiod_line_request_get_values_subset(request, offsets,
+						     &values, &err);
+	if (!ret) {
+		g_printerr("failed to read line values: %s\n", err->message);
+		return EXIT_FAILURE;
+	}
+
+	for (j = 0; j < values->len; j++)
+		g_print("%d ", g_array_index(values, GPIODLineValue, j));
+	g_print("\n");
+
+	return EXIT_SUCCESS;
+}
diff --git a/bindings/glib/examples/reconfigure_input_to_output_glib.c b/bindings/glib/examples/reconfigure_input_to_output_glib.c
new file mode 100644
index 0000000..896b19f
--- /dev/null
+++ b/bindings/glib/examples/reconfigure_input_to_output_glib.c
@@ -0,0 +1,103 @@ 
+// SPDX-License-Identifier: GPL-2.0-or-later
+// SPDX-FileCopyrightText: 2023 Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
+
+/*
+ * Example of a bi-directional line requested as input and then switched
+ * to output.
+ */
+
+#include <glib.h>
+#include <gpiod-glib.h>
+#include <stdlib.h>
+
+int main(void)
+{
+	/* Example configuration - customize to suit your situation */
+	static const gchar *const chip_path = "/dev/gpiochip1";
+	static const guint line_offset = 5;
+
+	g_autoptr(GPIODRequestConfig) req_cfg = NULL;
+	g_autoptr(GPIODLineSettings) settings = NULL;
+	g_autoptr(GPIODLineRequest) request = NULL;
+	g_autoptr(GPIODLineConfig) line_cfg = NULL;
+	g_autoptr(GArray) offsets = NULL;
+	g_autoptr(GPIODChip) chip = NULL;
+	g_autoptr(GError) err = NULL;
+	GPIODLineValue value;
+	gboolean ret;
+
+	offsets = g_array_new(FALSE, TRUE, sizeof(guint));
+	g_array_append_val(offsets, line_offset);
+
+	chip = g_gpiod_chip_new(chip_path, &err);
+	if (!chip) {
+		g_printerr("unable to open %s: %s\n", chip_path, err->message);
+		return EXIT_FAILURE;
+	}
+
+	settings = g_gpiod_line_settings_new(
+			"direction", G_GPIOD_LINE_DIRECTION_INPUT,
+			NULL);
+
+	line_cfg = g_gpiod_line_config_new();
+	ret = g_gpiod_line_config_add_line_settings(line_cfg, offsets,
+						    settings, &err);
+	if (!ret) {
+		g_printerr("failed to add line settings to line config: %s\n",
+			   err->message);
+		return EXIT_FAILURE;
+	}
+
+	req_cfg = g_gpiod_request_config_new(
+			"consumer", "reconfigure-input-to-output", NULL);
+
+	request = g_gpiod_chip_request_lines(chip, req_cfg, line_cfg, &err);
+	if (!request) {
+		g_printerr("failed to request lines: %s\n", err->message);
+		return EXIT_FAILURE;
+	}
+
+	/* Read the current line value. */
+	ret = g_gpiod_line_request_get_value(request, line_offset,
+					     &value, &err);
+	if (!ret) {
+		g_printerr("failed to read line value: %s\n", err->message);
+		return EXIT_FAILURE;
+	}
+
+	g_print("%s (input)\n",
+		value == G_GPIOD_LINE_VALUE_ACTIVE ? "Active" : "Inactive");
+
+	/* Switch the line to an output and drive it high. */
+	g_gpiod_line_settings_set_direction(settings,
+					    G_GPIOD_LINE_DIRECTION_OUTPUT);
+	g_gpiod_line_settings_set_output_value(settings,
+					       G_GPIOD_LINE_VALUE_ACTIVE);
+	ret = g_gpiod_line_config_add_line_settings(line_cfg, offsets,
+						    settings, &err);
+	if (!ret) {
+		g_printerr("failed to add line settings to line config: %s\n",
+			   err->message);
+		return EXIT_FAILURE;
+	}
+
+	/* Reconfigure lines. */
+	ret = g_gpiod_line_request_reconfigure_lines(request, line_cfg, &err);
+	if (!ret) {
+		g_printerr("failed to reconfigure lines: %s\n", err->message);
+		return EXIT_FAILURE;
+	}
+
+	/* Report the current driven value. */
+	ret = g_gpiod_line_request_get_value(request, line_offset,
+					     &value, &err);
+	if (!ret) {
+		g_printerr("failed to read line value: %s\n", err->message);
+		return EXIT_FAILURE;
+	}
+
+	g_print("%s (output)\n",
+		value == G_GPIOD_LINE_VALUE_ACTIVE ? "Active" : "Inactive");
+
+	return EXIT_SUCCESS;
+}
diff --git a/bindings/glib/examples/toggle_line_value_glib.c b/bindings/glib/examples/toggle_line_value_glib.c
new file mode 100644
index 0000000..f11f121
--- /dev/null
+++ b/bindings/glib/examples/toggle_line_value_glib.c
@@ -0,0 +1,99 @@ 
+// SPDX-License-Identifier: GPL-2.0-or-later
+// SPDX-FileCopyrightText: 2023 Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
+
+/* Minimal example of periodically toggling a single line. */
+
+#include <glib.h>
+#include <gpiod-glib.h>
+#include <stdlib.h>
+
+typedef struct {
+	GPIODLineRequest *request;
+	guint line_offset;
+	GPIODLineValue value;
+} ToggleData;
+
+static gboolean toggle_line(gpointer user_data)
+{
+	ToggleData *data = user_data;
+	g_autoptr(GError) err = NULL;
+	gboolean ret;
+
+	data->value = data->value == G_GPIOD_LINE_VALUE_ACTIVE ?
+				G_GPIOD_LINE_VALUE_INACTIVE :
+				G_GPIOD_LINE_VALUE_ACTIVE;
+
+	ret = g_gpiod_line_request_set_value(data->request, data->line_offset,
+					     data->value, &err);
+	if (!ret) {
+		g_printerr("failed to set line value: %s\n", err->message);
+		exit(EXIT_FAILURE);
+	}
+
+	g_print("%u=%s\n",
+		data->line_offset,
+		data->value == G_GPIOD_LINE_VALUE_ACTIVE ?
+					"active" : "inactive");
+
+	return G_SOURCE_CONTINUE;
+}
+
+int main(void)
+{
+	/* Example configuration - customize to suit your situation. */
+	static const gchar *const chip_path = "/dev/gpiochip1";
+	static const guint line_offset = 5;
+
+	g_autoptr(GPIODRequestConfig) req_cfg = NULL;
+	g_autoptr(GPIODLineSettings) settings = NULL;
+	g_autoptr(GPIODLineRequest) request = NULL;
+	g_autoptr(GPIODLineConfig) line_cfg = NULL;
+	g_autoptr(GArray) offsets = NULL;
+	g_autoptr(GPIODChip) chip = NULL;
+	g_autoptr(GMainLoop) loop = NULL;
+	g_autoptr(GError) err = NULL;
+	ToggleData data;
+	gboolean ret;
+
+	offsets = g_array_new(FALSE, TRUE, sizeof(guint));
+	g_array_append_val(offsets, line_offset);
+
+	chip = g_gpiod_chip_new(chip_path, &err);
+	if (!chip) {
+		g_printerr("unable to open %s: %s\n", chip_path, err->message);
+		return EXIT_FAILURE;
+	}
+
+	settings = g_gpiod_line_settings_new(
+			"direction", G_GPIOD_LINE_DIRECTION_OUTPUT,
+			NULL);
+	line_cfg = g_gpiod_line_config_new();
+	ret = g_gpiod_line_config_add_line_settings(line_cfg, offsets,
+						    settings, &err);
+	if (!ret) {
+		g_printerr("failed to add line settings to line config: %s\n",
+			   err->message);
+		return EXIT_FAILURE;
+	}
+
+	req_cfg = g_gpiod_request_config_new("consumer", "toggle-line-value",
+					     NULL);
+
+	request = g_gpiod_chip_request_lines(chip, req_cfg, line_cfg, &err);
+	if (!request) {
+		g_printerr("failed to request lines: %s\n", err->message);
+		return EXIT_FAILURE;
+	}
+
+	data.request = request;
+	data.line_offset = line_offset;
+	data.value = G_GPIOD_LINE_VALUE_INACTIVE;
+
+	loop = g_main_loop_new(NULL, FALSE);
+	/* Do the GLib way: add a callback to be invoked from the main loop. */
+	g_timeout_add_seconds(1, toggle_line, &data);
+
+	g_main_loop_run(loop);
+
+	return EXIT_SUCCESS;
+}
diff --git a/bindings/glib/examples/toggle_multiple_line_values_glib.c b/bindings/glib/examples/toggle_multiple_line_values_glib.c
new file mode 100644
index 0000000..24ee7fa
--- /dev/null
+++ b/bindings/glib/examples/toggle_multiple_line_values_glib.c
@@ -0,0 +1,132 @@ 
+// SPDX-License-Identifier: GPL-2.0-or-later
+// SPDX-FileCopyrightText: 2023 Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
+
+/* Minimal example of periodically toggling multiple lines. */
+
+#include <glib.h>
+#include <gpiod-glib.h>
+#include <stdlib.h>
+
+typedef struct {
+	GPIODLineRequest *request;
+	GArray *offsets;
+	GArray *values;
+} ToggleData;
+
+static void toggle_values(GArray *values)
+{
+	GPIODLineValue *value;
+	guint i;
+
+	for (i = 0; i < values->len; i++) {
+		value = &g_array_index(values, GPIODLineValue, i);
+		*value = *value == G_GPIOD_LINE_VALUE_ACTIVE ?
+					G_GPIOD_LINE_VALUE_INACTIVE :
+					G_GPIOD_LINE_VALUE_ACTIVE;
+	}
+}
+
+static gboolean toggle_lines(gpointer user_data)
+{
+	ToggleData *data = user_data;
+	g_autoptr(GError) err = NULL;
+	gboolean ret;
+	guint i;
+
+	toggle_values(data->values);
+
+	ret = g_gpiod_line_request_set_values_subset(data->request,
+						     data->offsets,
+						     data->values, &err);
+	if (!ret) {
+		g_printerr("failed to set line values: %s\n", err->message);
+		exit(EXIT_FAILURE);
+	}
+
+	for (i = 0; i < data->offsets->len; i++)
+		g_print("%u=%s ",
+			g_array_index(data->offsets, guint, i),
+			g_array_index(data->values,
+				      GPIODLineValue,
+				      i) == G_GPIOD_LINE_VALUE_ACTIVE ?
+						"active" : "inactive");
+	g_print("\n");
+
+	return G_SOURCE_CONTINUE;
+}
+
+int main(void)
+{
+	/* Example configuration - customize to suit your situation. */
+	static const gchar *const chip_path = "/dev/gpiochip1";
+	static const guint line_offsets[] = { 5, 3, 7 };
+	static const GPIODLineValue line_values[] = {
+		G_GPIOD_LINE_VALUE_ACTIVE,
+		G_GPIOD_LINE_VALUE_ACTIVE,
+		G_GPIOD_LINE_VALUE_INACTIVE
+	};
+	static const gsize num_lines = 3;
+
+	g_autoptr(GPIODRequestConfig) req_cfg = NULL;
+	g_autoptr(GPIODLineSettings) settings = NULL;
+	g_autoptr(GPIODLineRequest) request = NULL;
+	g_autoptr(GPIODLineConfig) line_cfg = NULL;
+	g_autoptr(GArray) offsets = NULL;
+	g_autoptr(GPIODChip) chip = NULL;
+	g_autoptr(GMainLoop) loop = NULL;
+	g_autoptr(GArray) values = NULL;
+	g_autoptr(GError) err = NULL;
+	ToggleData data;
+	gboolean ret;
+
+	offsets = g_array_new(FALSE, TRUE, sizeof(guint));
+	g_array_append_vals(offsets, line_offsets, num_lines);
+
+	values = g_array_new(FALSE, TRUE, sizeof(GPIODLineValue));
+	g_array_append_vals(values, line_values, num_lines);
+
+	chip = g_gpiod_chip_new(chip_path, &err);
+	if (!chip) {
+		g_printerr("unable to open %s: %s\n", chip_path, err->message);
+		return EXIT_FAILURE;
+	}
+
+	settings = g_gpiod_line_settings_new(
+			"direction", G_GPIOD_LINE_DIRECTION_OUTPUT,
+			NULL);
+	line_cfg = g_gpiod_line_config_new();
+	ret = g_gpiod_line_config_add_line_settings(line_cfg, offsets,
+						    settings, &err);
+	if (!ret) {
+		g_printerr("failed to add line settings to line config: %s\n",
+			   err->message);
+		return EXIT_FAILURE;
+	}
+
+	ret = g_gpiod_line_config_set_output_values(line_cfg, values, &err);
+	if (!ret) {
+		g_printerr("failed to set output values: %s\n", err->message);
+		return EXIT_FAILURE;
+	}
+
+	req_cfg = g_gpiod_request_config_new("consumer", "toggle-line-value",
+					     NULL);
+
+	request = g_gpiod_chip_request_lines(chip, req_cfg, line_cfg, &err);
+	if (!request) {
+		g_printerr("failed to request lines: %s\n", err->message);
+		return EXIT_FAILURE;
+	}
+
+	data.request = request;
+	data.offsets = offsets;
+	data.values = values;
+
+	loop = g_main_loop_new(NULL, FALSE);
+	/* Do the GLib way: add a callback to be invoked from the main loop. */
+	g_timeout_add_seconds(1, toggle_lines, &data);
+
+	g_main_loop_run(loop);
+
+	return EXIT_SUCCESS;
+}
diff --git a/bindings/glib/examples/watch_line_info_glib.c b/bindings/glib/examples/watch_line_info_glib.c
new file mode 100644
index 0000000..e05d020
--- /dev/null
+++ b/bindings/glib/examples/watch_line_info_glib.c
@@ -0,0 +1,63 @@ 
+// SPDX-License-Identifier: GPL-2.0-or-later
+// SPDX-FileCopyrightText: 2023 Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
+
+/* Minimal example of watching for requests on particular lines. */
+
+#include <glib.h>
+#include <gpiod-glib.h>
+#include <stdlib.h>
+
+static void on_info_event(GPIODChip *chip G_GNUC_UNUSED,
+			  GPIODInfoEvent *event,
+			  gpointer data G_GNUC_UNUSED)
+{
+	g_autoptr(GPIODLineInfo) info = NULL;
+	g_autoptr(GString) event_name = NULL;
+	guint offset;
+
+	event_name = g_string_new(
+			g_enum_to_string(G_GPIOD_INFO_EVENT_TYPE_TYPE,
+				g_gpiod_info_event_get_event_type(event)));
+	g_string_replace(event_name, "G_GPIOD_INFO_EVENT_LINE_", "", 0);
+	info = g_gpiod_info_event_get_line_info(event);
+	offset = g_gpiod_line_info_get_offset(info);
+
+	g_print("%s %u\n", event_name->str, offset);
+}
+
+int main(void)
+{
+	static const gchar *const chip_path = "/dev/gpiochip1";
+	static const guint line_offsets[] = { 5, 3, 7 };
+	static const gsize num_lines = 3;
+
+	g_autoptr(GMainLoop) loop = NULL;
+	g_autoptr(GPIODChip) chip = NULL;
+	g_autoptr(GError) err = NULL;
+	guint i;
+
+	chip = g_gpiod_chip_new(chip_path, &err);
+	if (!chip) {
+		g_printerr("unable to open %s: %s\n", chip_path, err->message);
+		return EXIT_FAILURE;
+	}
+
+	for (i = 0; i < num_lines; i++) {
+		g_autoptr(GPIODLineInfo) info =
+			g_gpiod_chip_watch_line_info(chip, line_offsets[i],
+						     &err);
+		if (!info) {
+			g_printerr("unable to watch line info for offset %u: %s",
+				   line_offsets[1], err->message);
+			return EXIT_FAILURE;
+		}
+	}
+
+	loop = g_main_loop_new(NULL, FALSE);
+
+	g_signal_connect(chip, "info-event", G_CALLBACK(on_info_event), NULL);
+
+	g_main_loop_run(loop);
+
+	return EXIT_SUCCESS;
+}
diff --git a/bindings/glib/examples/watch_line_value_glib.c b/bindings/glib/examples/watch_line_value_glib.c
new file mode 100644
index 0000000..0f3933e
--- /dev/null
+++ b/bindings/glib/examples/watch_line_value_glib.c
@@ -0,0 +1,91 @@ 
+// SPDX-License-Identifier: GPL-2.0-or-later
+// SPDX-FileCopyrightText: 2023 Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
+
+/* Minimal example of asynchronously watching for edges on a single line. */
+
+#include <glib.h>
+#include <gpiod-glib.h>
+#include <stdlib.h>
+
+static void on_edge_event(GPIODLineRequest *request G_GNUC_UNUSED,
+			  GPIODEdgeEvent *event,
+			  gpointer data G_GNUC_UNUSED)
+{
+	g_autoptr(GString) event_name = NULL;
+	guint64 timestamp;
+	guint offset;
+
+	event_name = g_string_new(
+			g_enum_to_string(G_GPIOD_EDGE_EVENT_TYPE_TYPE,
+				g_gpiod_edge_event_get_event_type(event)));
+	g_string_replace(event_name, "G_GPIOD_EDGE_EVENT_", "", 0);
+	timestamp = g_gpiod_edge_event_get_timestamp_ns(event);
+	offset = g_gpiod_edge_event_get_line_offset(event);
+
+	g_print("%s %lu %u\n", event_name->str, timestamp, offset);
+}
+
+int main(void)
+{
+	/* Example configuration - customize to suit your situation. */
+	static const gchar *const chip_path = "/dev/gpiochip1";
+	static const guint line_offset = 5;
+
+	g_autoptr(GPIODRequestConfig) req_cfg = NULL;
+	g_autoptr(GPIODLineSettings) settings = NULL;
+	g_autoptr(GPIODLineRequest) request = NULL;
+	g_autoptr(GPIODLineConfig) line_cfg = NULL;
+	g_autoptr(GArray) offsets = NULL;
+	g_autoptr(GMainLoop) loop = NULL;
+	g_autoptr(GPIODChip) chip = NULL;
+	g_autoptr(GError) err = NULL;
+	gboolean ret;
+
+	offsets = g_array_new(FALSE, TRUE, sizeof(guint));
+	g_array_append_val(offsets, line_offset);
+
+	chip = g_gpiod_chip_new(chip_path, &err);
+	if (!chip) {
+		g_printerr("unable to open %s: %s\n", chip_path, err->message);
+		return EXIT_FAILURE;
+	}
+
+	/*
+	 * Assume a button connecting the pin to ground, so pull it up and
+	 * provide some debounce.
+	 */
+	settings = g_gpiod_line_settings_new(
+			"direction", G_GPIOD_LINE_DIRECTION_INPUT,
+			"edge-detection", G_GPIOD_LINE_EDGE_BOTH,
+			"bias", G_GPIOD_LINE_BIAS_PULL_UP,
+			"debounce-period-us", 1000,
+			NULL);
+
+	line_cfg = g_gpiod_line_config_new();
+	ret = g_gpiod_line_config_add_line_settings(line_cfg, offsets,
+						    settings, &err);
+	if (!ret) {
+		g_printerr("failed to add line settings to line config: %s",
+			   err->message);
+		return EXIT_FAILURE;
+	}
+
+	req_cfg = g_gpiod_request_config_new("consumer", "watch-line-value",
+					     NULL);
+
+	request = g_gpiod_chip_request_lines(chip, req_cfg, line_cfg, &err);
+	if (!request) {
+		g_printerr("failed to request lines: %s", err->message);
+		return EXIT_FAILURE;
+	}
+
+	loop = g_main_loop_new(NULL, FALSE);
+
+	/* Connect to the edge-event signal on the line-request. */
+	g_signal_connect(request, "edge-event",
+			 G_CALLBACK(on_edge_event), NULL);
+
+	g_main_loop_run(loop);
+
+	return EXIT_SUCCESS;
+}
diff --git a/bindings/glib/examples/watch_multiple_edge_rising_glib.c b/bindings/glib/examples/watch_multiple_edge_rising_glib.c
new file mode 100644
index 0000000..e99b58a
--- /dev/null
+++ b/bindings/glib/examples/watch_multiple_edge_rising_glib.c
@@ -0,0 +1,95 @@ 
+// SPDX-License-Identifier: GPL-2.0-or-later
+// SPDX-FileCopyrightText: 2023 Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
+
+/*
+ * Minimal example of asynchronously watching for rising edges on multiple
+ * lines.
+ */
+
+#include <glib.h>
+#include <gpiod-glib.h>
+#include <stdlib.h>
+
+static void on_edge_event(GPIODLineRequest *request G_GNUC_UNUSED,
+			  GPIODEdgeEvent *event,
+			  gpointer data G_GNUC_UNUSED)
+{
+	g_autoptr(GString) event_name = NULL;
+	guint64 timestamp;
+	guint offset;
+
+	event_name = g_string_new(
+			g_enum_to_string(G_GPIOD_EDGE_EVENT_TYPE_TYPE,
+				g_gpiod_edge_event_get_event_type(event)));
+	g_string_replace(event_name, "G_GPIOD_EDGE_EVENT_", "", 0);
+	timestamp = g_gpiod_edge_event_get_timestamp_ns(event);
+	offset = g_gpiod_edge_event_get_line_offset(event);
+
+	g_print("%s %lu %u\n", event_name->str, timestamp, offset);
+}
+
+int main(void)
+{
+	/* Example configuration - customize to suit your situation. */
+	static const gchar *const chip_path = "/dev/gpiochip1";
+	static const guint line_offsets[] = { 5, 3, 7 };
+	static const gsize num_lines = 3;
+
+	g_autoptr(GPIODRequestConfig) req_cfg = NULL;
+	g_autoptr(GPIODLineSettings) settings = NULL;
+	g_autoptr(GPIODLineRequest) request = NULL;
+	g_autoptr(GPIODLineConfig) line_cfg = NULL;
+	g_autoptr(GArray) offsets = NULL;
+	g_autoptr(GMainLoop) loop = NULL;
+	g_autoptr(GPIODChip) chip = NULL;
+	g_autoptr(GError) err = NULL;
+	gboolean ret;
+
+	offsets = g_array_new(FALSE, TRUE, sizeof(guint));
+	g_array_append_vals(offsets, line_offsets, num_lines);
+
+	chip = g_gpiod_chip_new(chip_path, &err);
+	if (!chip) {
+		g_printerr("unable to open %s: %s\n", chip_path, err->message);
+		return EXIT_FAILURE;
+	}
+
+	/*
+	 * Assume a button connecting the pin to ground, so pull it up and
+	 * provide some debounce.
+	 */
+	settings = g_gpiod_line_settings_new(
+			"direction", G_GPIOD_LINE_DIRECTION_INPUT,
+			"edge-detection", G_GPIOD_LINE_EDGE_RISING,
+			"bias", G_GPIOD_LINE_BIAS_PULL_UP,
+			"debounce-period-us", 1000,
+			NULL);
+
+	line_cfg = g_gpiod_line_config_new();
+	ret = g_gpiod_line_config_add_line_settings(line_cfg, offsets,
+						    settings, &err);
+	if (!ret) {
+		g_printerr("failed to add line settings to line config: %s",
+			   err->message);
+		return EXIT_FAILURE;
+	}
+
+	req_cfg = g_gpiod_request_config_new(NULL);
+	g_gpiod_request_config_set_consumer(req_cfg, "watch-multiline-value");
+
+	request = g_gpiod_chip_request_lines(chip, req_cfg, line_cfg, &err);
+	if (!request) {
+		g_printerr("failed to request lines: %s", err->message);
+		return EXIT_FAILURE;
+	}
+
+	loop = g_main_loop_new(NULL, FALSE);
+
+	/* Connect to the edge-event signal on the line-request. */
+	g_signal_connect(request, "edge-event",
+			 G_CALLBACK(on_edge_event), NULL);
+
+	g_main_loop_run(loop);
+
+	return EXIT_SUCCESS;
+}