diff mbox series

[1/2] gpio: davinci: Do not clear the bank intr enable bit in save_context

Message ID 20230403072443.83810-2-d-gole@ti.com
State Accepted
Commit fe092498cb9638418c96675be320c74a16306b48
Headers show
Series gpio: davinci: interrupt related fixes | expand

Commit Message

Dhruva Gole April 3, 2023, 7:24 a.m. UTC
The interrupt enable bits might be set if we want to use the GPIO as
wakeup source. Clearing this will mean disabling of interrupts in the GPIO
banks that we may want to wakeup from.
Thus remove the line that was clearing this bit from the driver's save
context function.

Cc: Devarsh Thakkar <devarsht@ti.com>
Fixes: 0651a730924b ("gpio: davinci: Add support for system suspend/resume PM")
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Keerthy <j-keerthy@ti.com>
---
 drivers/gpio/gpio-davinci.c | 3 ---
 1 file changed, 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/gpio/gpio-davinci.c b/drivers/gpio/gpio-davinci.c
index 7fc83057990a..d7595b39e8c4 100644
--- a/drivers/gpio/gpio-davinci.c
+++ b/drivers/gpio/gpio-davinci.c
@@ -639,9 +639,6 @@  static void davinci_gpio_save_context(struct davinci_gpio_controller *chips,
 		context->set_falling = readl_relaxed(&g->set_falling);
 	}
 
-	/* Clear Bank interrupt enable bit */
-	writel_relaxed(0, base + BINTEN);
-
 	/* Clear all interrupt status registers */
 	writel_relaxed(GENMASK(31, 0), &g->intstat);
 }