@@ -474,11 +474,38 @@ static int s32_get_slew_regval(int arg)
return -EINVAL;
}
-static int s32_get_pin_conf(enum pin_config_param param, u32 arg,
- unsigned int *mask, unsigned int *config)
+static inline void s32_pin_set_pull(enum pin_config_param param,
+ unsigned int *mask, unsigned int *config)
{
+ switch (param) {
+ case PIN_CONFIG_BIAS_DISABLE:
+ case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
+ *config &= ~(S32_MSCR_PUS | S32_MSCR_PUE);
+ break;
+ case PIN_CONFIG_BIAS_PULL_UP:
+ *config |= S32_MSCR_PUS | S32_MSCR_PUE;
+ break;
+ case PIN_CONFIG_BIAS_PULL_DOWN:
+ *config &= ~S32_MSCR_PUS;
+ *config |= S32_MSCR_PUE;
+ break;
+ default:
+ return;
+ }
+
+ *mask |= S32_MSCR_PUS | S32_MSCR_PUE;
+}
+
+static int s32_parse_pincfg(unsigned long pincfg, unsigned int *mask,
+ unsigned int *config)
+{
+ enum pin_config_param param;
+ u32 arg;
int ret;
+ param = pinconf_to_config_param(pincfg);
+ arg = pinconf_to_config_argument(pincfg);
+
switch (param) {
/* All pins are persistent over suspend */
case PIN_CONFIG_PERSIST_STATE:
@@ -488,17 +515,11 @@ static int s32_get_pin_conf(enum pin_config_param param, u32 arg,
*mask |= S32_MSCR_ODE;
break;
case PIN_CONFIG_OUTPUT_ENABLE:
- if (arg)
- *config |= S32_MSCR_OBE;
- else
- *config &= ~S32_MSCR_OBE;
+ *config |= S32_MSCR_OBE;
*mask |= S32_MSCR_OBE;
break;
case PIN_CONFIG_INPUT_ENABLE:
- if (arg)
- *config |= S32_MSCR_IBE;
- else
- *config &= ~S32_MSCR_IBE;
+ *config |= S32_MSCR_IBE;
*mask |= S32_MSCR_IBE;
break;
case PIN_CONFIG_SLEW_RATE:
@@ -509,25 +530,16 @@ static int s32_get_pin_conf(enum pin_config_param param, u32 arg,
*mask |= S32_MSCR_SRE(~0);
break;
case PIN_CONFIG_BIAS_PULL_UP:
- if (arg)
- *config |= S32_MSCR_PUS;
- else
- *config &= ~S32_MSCR_PUS;
- fallthrough;
case PIN_CONFIG_BIAS_PULL_DOWN:
- if (arg)
- *config |= S32_MSCR_PUE;
- else
- *config &= ~S32_MSCR_PUE;
- *mask |= S32_MSCR_PUE | S32_MSCR_PUS;
+ s32_pin_set_pull(param, mask, config);
break;
case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
*config &= ~(S32_MSCR_ODE | S32_MSCR_OBE | S32_MSCR_IBE);
*mask |= S32_MSCR_ODE | S32_MSCR_OBE | S32_MSCR_IBE;
- fallthrough;
+ s32_pin_set_pull(param, mask, config);
+ break;
case PIN_CONFIG_BIAS_DISABLE:
- *config &= ~(S32_MSCR_PUS | S32_MSCR_PUE);
- *mask |= S32_MSCR_PUS | S32_MSCR_PUE;
+ s32_pin_set_pull(param, mask, config);
break;
default:
return -EOPNOTSUPP;
@@ -553,9 +565,7 @@ static int s32_pinconf_mscr_update(struct pinctrl_dev *pctldev,
pin_get_name(pctldev, pin_id), num_configs);
for (i = 0; i < num_configs; i++) {
- ret = s32_get_pin_conf(pinconf_to_config_param(configs[i]),
- pinconf_to_config_argument(configs[i]),
- &mask, &config);
+ ret = s32_parse_pincfg(configs[i], &mask, &config);
if (ret)
return ret;
}
Move common codes into smaller inline functions and remove some argument handlings that are not actually used by either S32 MSCR register or generic config params. Signed-off-by: Chester Lin <clin@suse.com> --- Changes in v2: - Drop unnecessary marcos and s32_pin_config() implemented in v1 and set/clear mask/config values transparently. - Put pull-function related cases together in s32_pin_set_pull(). drivers/pinctrl/nxp/pinctrl-s32cc.c | 62 +++++++++++++++++------------ 1 file changed, 36 insertions(+), 26 deletions(-)