new file mode 100644
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/nuvoton,sgpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton SGPIO controller
+
+maintainers:
+ - Jim LIU <JJLIU0@nuvoton.com>
+
+description:
+ This SGPIO controller is for NUVOTON NPCM7xx and NPCM8xx SoC.
+ Nuvoton NPCM7xx SGPIO module is combine serial to parallel IC (HC595)
+ and parallel to serial IC (HC165), and use APB3 clock to control it.
+ This interface has 4 pins (D_out , D_in, S_CLK, LDSH).
+ NPCM7xx/NPCM8xx have two sgpio module each module can support up
+ to 64 output pins,and up to 64 input pin, the pin is only for gpi or gpo.
+ GPIO pins have sequential, First half is gpo and second half is gpi.
+ GPIO pins can be programmed to support the following options
+ - Support interrupt option for each input port and various interrupt
+ sensitivity option (level-high, level-low, edge-high, edge-low)
+ - ngpios is number of nuvoton,input-ngpios GPIO lines and nuvoton,output-ngpios GPIO lines.
+ nuvoton,input-ngpios GPIO lines is only for gpi.
+ nuvoton,output-ngpios GPIO lines is only for gpo.
+
+properties:
+ compatible:
+ enum:
+ - nuvoton,npcm750-sgpio
+ - nuvoton,npcm845-sgpio
+
+ reg:
+ maxItems: 1
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ nuvoton,input-ngpios:
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ description: |
+ The numbers of GPIO's exposed.GPIO lines is only for gpi.
+ minimum: 0
+ maximum: 64
+
+ nuvoton,output-ngpios:
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ description: |
+ The numbers of GPIO's exposed.GPIO lines is only for gpo.
+ minimum: 0
+ maximum: 64
+
+required:
+ - compatible
+ - reg
+ - clock
+ - gpio-controller
+ - '#gpio-cells'
+ - interrupts
+ - nuvoton,input-ngpios
+ - nuvoton,output-ngpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/nuvoton,npcm7xx-clock.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ gpio8: gpio@101000 {
+ compatible = "nuvoton,npcm750-sgpio";
+ reg = <0x101000 0x200>;
+ clocks = <&clk NPCM7XX_CLK_APB3>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ nuvoton,input-ngpios = <64>;
+ nuvoton,output-ngpios = <64>;
+ status = "disabled";
+ };
Add dt-bindings document for the Nuvoton NPCM7xx sgpio driver Signed-off-by: Jim Liu <jim.t90615@gmail.com> --- Changes for v4: - remove bus bus-frequency - modify in/out description Changes for v4: - modify in/out property - modify bus-frequency property Changes for v3: - modify description - modify in/out property name Changes for v2: - modify description --- .../bindings/gpio/nuvoton,sgpio.yaml | 87 +++++++++++++++++++ 1 file changed, 87 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpio/nuvoton,sgpio.yaml